Cycloaddition 1,2-Allylation

Intermolecular Allylboration. A tandem aza[4+2] cycloaddition/allyl-boration three-component reaction has been designed based on the prece-dented carbocyclic [4- -2] cycloaddition/allylboration and a snbsequent one-pot variant. Thns, the thermal reaction between hydrazonobutadienes 138, A-substitnted maleimides, and aldehydes provides polysnbstituted a-hydroxy-alkylpiperidines 141 via the cyclic allylboronate intermediate 139 and the proposed chairlike transition stmctnre 140 (Eq. 103). Monoactivated dienophiles like acrylates fail to react with heterodienes 138 bnt the scope of aldehydes is very broad both ahphatic and aromatic aldehydes are snitable, inclnding electron-rich ones. An inverse electron-demand variant to access the corresponding dihy-dropyran derivatives via the intermediacy of enantiomerically enriched pyranyl allylic boronate 76 has been snbsequently developed (see Eq. 64). ° ... 

Michael-aldol reaction as an alternative to the Morita-Baylis-Hillman reaction 14 recent results in conjugate addition of nitroalkanes to electron-poor alkenes 15 asymmetric cyclopropanation of chiral (l-phosphoryl)vinyl sulfoxides 16 synthetic methodology using tertiary phosphines as nucleophilic catalysts in combination with allenoates or 2-alkynoates 17 recent advances in the transition metal-catalysed asymmetric hydrosilylation of ketones, imines, and electrophilic C=C bonds 18 Michael additions catalysed by transition metals and lanthanide species 19 recent progress in asymmetric organocatalysis, including the aldol reaction, Mannich reaction, Michael addition, cycloadditions, allylation, epoxidation, and phase-transfer catalysis 20 and nucleophilic phosphine organocatalysis.21... 

Scheme 2.65 Tandem [2 + 2] cycloaddition/allylic rearrangement to pyran-2-ones [122, 123).

Dramatic rate accelerations of [4 + 2]cycloadditions were observed in an inert, extremely polar solvent, namely in5 M solutions oflithium perchlorate in diethyl ether(s 532 g LiC104 per litre ). Diels-Alder additions requiring several days, 10—20 kbar of pressure, and/ or elevated temperatures in apolar solvents are achieved in high yields in some hours at ambient pressure and temperature in this solvent (P.A. Grieco, 1990). Also several other reactions, e.g, allylic rearrangements and Michael additions, can be drastically accelerated by this magic solvent. The diastereoselectivities of the reactions in apolar solvents and in LiClO EtjO are often different or even complementary and become thus steerable. 

Chemoselectivity in the cycloaddition of 2-methylenecycloheptenone (174) changes on addition of In(acac)3. The allylic carbonate 175 reacts with the ketone 174 in the presence of In(acac)3 to give the methylenetetrahydrofuran 176, and the methylenecyclopentane 177 is obtained in its absence[l 13], The cycloaddition of ynones to produce the methylenetetrahydrofuran proceeds smoothly only in the presence of In(acac)3 (10 mol%)[114]. 

Aldehydes take part in the cycloaddition to give the methylenetetrahydrofuran 178 by the co-catalysis of Pd and Sn compounds[115]. A similar product 180 is obtained by the reaction of the allyl acetate 179, which has a tributyltin group instead of a TMS group, with aldehydesfl 16]. The pyrrolidine derivative 182 is formed by the addition of the tosylimine 181 to 154[117]. 

The TT-allylpalladium complexes 241 formed from the ally carbonates 240 bearing an anion-stabilizing EWG are converted into the Pd complexes of TMM (trimethylenemethane) as reactive, dipolar intermediates 242 by intramolecular deprotonation with the alkoxide anion, and undergo [3 + 2] cycloaddition to give five-membered ring compounds 244 by Michael addition to an electron-deficient double bond and subsequent intramolecular allylation of the generated carbanion 243. This cycloaddition proceeds under neutral conditions, yielding the functionalized methylenecyclopentanes 244[148], The syn-... 

Allylic phosphates are used for carbonylation in the presence of amines under pressure. Carbonylation of diethyl neryl phosphate (389) affords ethyl homonerate (390), maintaining the geometric integrity of the double bond[244]. The carbonylation of allyl phosphate in the presence of the imine 392 affords the /3-lactam 393. The reaction may be explained by the formation of the ketene 391 from the acyl phosphate, and its stereoselective (2 + 2] cycloaddition to the imine 392 to give the /3-lactam 393(247],... 

Cycloaddition of COj with the dimethyl-substituted methylenecyclopropane 75 proceeds smoothly above 100 °C under pressure, yielding the five-membered ring lactone 76. The regiocheraistry of this reaction is different from that of above-mentioned diphenyl-substituted methylenecyclopropanes 66 and 67[61], This allylic lactone 76 is another source of trimethylenemethane when it is treated with Pd(0) catalyst coordinated by dppe in refluxing toluene to generate 77, and its reaction with aldehydes or ketones affords the 3-methylenetetrahy-drofuran derivative 78 as expected for this intermediate. Also, the lactone 76 reacts with a, /3-unsaturated carbonyl compounds. The reaction of coumarin (79) with 76 to give the chroman-2-one derivative 80 is an example[62]. 

Refer to the molecular orbital diagrams of allyl cation (Figure 10 13) and those presented earlier in this chapter for ethylene and 1 3 butadiene (Figures 10 9 and 10 10) to decide which of the following cycloaddition reactions are allowed and which are forbidden according to the Woodward-Floffmann rules... 

The interaction of diazomethane with 1-azirines was the first example of a 1,3-dipolar cycloaddition with this ring system (64JOC3049, 68JOC4316). 1,3-Dipolar addition produces the triazoline adduct (87). This material can exist in equilibrium with its valence tautomer (88), and allylic azides (89) and (90) can be produced from these triazolines by ring cleavage. 

The following compounds have been obtained from thiete 1,1-dioxide Substituted cycloheptatrienes, benzyl o-toluenethiosulfinate, pyrazoles, - naphthothiete 1,1-dioxides, and 3-subst1tuted thietane 1,1-dioxides.It is a dienophile in Diels-Alder reactions and undergoes cycloadditions with enamines, dienamines, and ynamines. Thiete 1,1-dioxide is a source of the novel intermediate, vinylsulfene (CH2=CHCH=SQ2). which undergoes cyclo-additions to strained olefinic double bonds, reacts with phenol to give allyl sulfonate derivatives or cyclizes unimolecularly to give an unsaturated sultene. - Platinum and iron complexes of thiete 1,1-dioxide have been reported. 

A similar transformation results when trimethylsilyloxy-substituted allylic halides react with silver perchlorate in nitromethane. The resulting allylic cation gives cycloaddition reactions with dienes such as cyclopentadiene. The isolated products result from desilyla-tion of the initial adducts ... 

The 1,3-dipolar molecules are isoelectronic with the allyl anion and have four electrons in a n system encompassing the 1,3-dipole. Some typical 1,3-dipolar species are shown in Scheme 11.4. It should be noted that all have one or more resonance structures showing the characteristic 1,3-dipole. The dipolarophiles are typically alkenes or alkynes, but all that is essential is a tc bond. The reactivity of dipolarophiles depends both on the substituents present on the n bond and on the nature of the 1,3-dipole involved in the reaction. Because of the wide range of structures that can serve either as a 1,3-dipole or as a dipolarophile, the 1,3-dipolar cycloaddition is a very useful reaction for the construction of five-membered heterocyclic rings. 

The 1,3-dipolar cycloadditions offluonnatedallenes provide a rich and varied chemistry Allenes, such as 1,1-difluoroallene and fluoroallene, that have fluorine substitution on only one of their two cumulated double bonds are very reactive toward 1,3-dipoles Such activation derives from the electron attracting inductive and hyperconjugative effects of the allylic fluorine substituent(s) that give nse to a considerable lowering of the energy of the LUMO of the C(2)-C(3) n bond [27]... 

UV irradiation of hexafluorobenzene with indene or cycloalkenes gives high yields of 2+2 adducts, which undergo further intramolecular cycloaddition to form hexafluoropolycycloalkanes [754] (equation 38) Photolysis of fluormated deriva tives of vinylbenzenes afford benzocyclobutenes, whereas allyl benzenes yield Dewar benzene-type products [755]... 

Intramolecular cycloaddition reactions of allylic cations with participation and/ or formation of heterocycles, mainly [4+3]-cycloaddition to furan system 97T6235. 

Intramolecular cycloadditions of substrates with a cleavable tether have also been realized. Thus esters (37a-37d) provided the structurally interesting tricyclic lactones (38-43). It is interesting to note that the cyclododecenyl system (w = 7) proceeded at room temperature whereas all others required refluxing dioxane. In each case, the stereoselectivity with respect to the tether was excellent. As expected, the cyclohexenyl (n=l) and cycloheptenyl (n = 2) gave the syn adducts (38) and (39) almost exclusively. On the other hand, the cyclooctenyl (n = 3) and cyclododecenyl (n = 7) systems favored the anti adducts (41) and (42) instead. The formation of the endocyclic isomer (39, n=l) in the cyclohexenyl case can be explained by the isomerization of the initial adduct (44), which can not cyclize due to ring-strain, to the other 7t-allyl-Pd intermediate (45) which then ring-closes to (39) (Scheme 2.13) [20]. While the yields may not be spectacular, it is still remarkable that these reactions proceeded as well as they did since the substrates do contain another allylic ester moiety which is known to undergo ionization in the presence of the same palladium catalyst. 

On the other hand, the corresponding tin precursor (63) undergoes smooth cycloaddition with a wide variety of aldehydes to produce the desired methylene-tetrahydrofnran in good yields [32, 33]. Thus prenylaldehyde reacts with (63) to give cleanly the cycloadduct (64), whereas the reaction with the silyl precursor (1) yields only decomposition products (Scheme 2.20) [31]. This smooth cycloaddition is attributed to the improved reactivity of the stannyl ether (65) towards the 7t-allyl ligand. Although the reactions of (63) with aldehydes are quite robust, the use of a tin reagent as precursor for TMM presents drawbacks such as cost, stability, toxicity, and difficult purification of products. 

Substituted TMM complexes also cycloadd to aldehydes in the presence of a tin cocatalyst such as MesSnOAc and MesSnOTs [31]. Reaction of 2-heptenal with methyl precursor (6) gave a mixture of methylenetetrahydrofurans (68) and (69). This regioselectivity is reversed with 10-undecenal and methyl precursor (5), where adduct (70) now predominates over (71). As in the carbocyclic system, the phenylthio group also functions as a regiocontrol element in reaction with cyclohexyl aldehyde. The initially formed adduct (72) eliminates the element of thio-phenol on attempted allyl rearrangement, and the overall process becomes a cycloaddition approach to furans (Scheme 2.21) [20]. 

The reaction course of the cycloaddition reaction can also be dependent on the Lewis acid complex used as the catalyst. When the substrate contains an allylic C-H bond, both a cycloaddition and an ene reaction can occur. In the reaction of glyoxylate 4 with 2,3-dimethyl-l,3-butadiene 5 both the cycloaddition product 6... 

The 1,3-dipoles consist of elements from main groups IV, V, and VI. The parent 1,3-dipoles consist of elements from the second row and the central atom of the dipole is limited to N or O [10]. Thus, a limited number of structures can be formed by permutations of N, C, and O. If higher row elements are excluded twelve allyl anion type and six propargyl/allenyl anion type 1,3-dipoles can be obtained. However, metal-catalyzed asymmetric 1,3-dipolar cycloaddition reactions have only been explored for the five types of dipole shown in Scheme 6.2. 

In the 1,3-dipolar cycloaddition reactions of especially allyl anion type 1,3-dipoles with alkenes the formation of diastereomers has to be considered. In reactions of nitrones with a terminal alkene the nitrone can approach the alkene in an endo or an exo fashion giving rise to two different diastereomers. The nomenclature endo and exo is well known from the Diels-Alder reaction [3]. The endo isomer arises from the reaction in which the nitrogen atom of the dipole points in the same direction as the substituent of the alkene as outlined in Scheme 6.7. However, compared with the Diels-Alder reaction in which the endo transition state is stabilized by secondary 7t-orbital interactions, the actual interaction of the N-nitrone p -orbital with a vicinal p -orbital on the alkene, and thus the stabilization, is small [25]. The endojexo selectivity in the 1,3-dipolar cycloaddition reaction is therefore primarily controlled by the structure of the substrates or by a catalyst. 

The first, and so far only, metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction of nitrile oxides with alkenes was reported by Ukaji et al. [76, 77]. Upon treatment of allyl alcohol 45 with diethylzinc and (l ,J )-diisopropyltartrate, followed by the addition of diethylzinc and substituted hydroximoyl chlorides 46, the isoxazolidines 47 are formed with impressive enantioselectivities of up to 96% ee (Scheme 6.33) [76]. 

---