Cyanoacetamides

Two compounds, which may be prepared from ethyl cyanoacetate and also find application in synthetical work, may be included here. Cyanoacetamide, prepar from ethyl cyanoacetate and concentrated ammonia solution ... 

Malononitrile, obtained by the dehydration of cyanoacetamide with phosphorus pentachloride ... 

Gyanoacetamide. Place 150 ml. of concentrated aqueous ammonia solution (sp. gr. 0-88) in a 500 ml. wide-mouthed conical flask and add 200 g. (188 ml.) of ethyl cyanoacetate. Shake the cloudy mixture some heat is evolved and it becomes clear in about 3 minutes. Stand the loosely stoppered flask in an ice-salt mixture for 1 hour, filter rapidly with suction, and ash the solid with two 25 ml. portions of ice-cold ethanol. Dry in the air the yield of pale yellow cyanoacetamide is 110 g. (1). Recrystallise from 190 ml. of 95 per cent, ethanol a colourless product, m.p. 119-120 , is deposited with practically no loss. 

A further 25 g. of cyanoacetamide may be obtained by evaporating the original mother liquor to dryness under reduced pressure (water pump) whilst heating the flask on a steam bath. The residue is dissolved in 50 ml. of hot ethanol, the solution shaken for a few minutes with decolourising carbon, Altered with suction whilst hot, and then cooled in ice. The resulting yellowish amide is recrystallised with the addition of decolourising carbon, if necessary. 

Reactions. The chemical properties of cyanoacetates ate quite similar to those of the malonates. The carbonyl activity of the ester function is increased by the cyano group s tendency to withdraw electrons. Therefore, amidation with ammonia [7664-41-7] to cyanoacetamide [107-91-5] (55) or with urea to cyanoacetylurea [448-98-2] (56) proceeds very easily. An interesting reaction of cyanoacetic acid is the Knoevenagel condensation with aldehydes followed by decarboxylation which leads to substituted acrylonitriles (57) such as (29), or with ketones followed by decarboxylation with a shift of the double bond to give P,y-unsaturated nitriles (58) such as (30) when cyclohexanone [108-94-1] is used. 

Uses. In many cases cyanoacetic acid, cyanoacetates, or cyanoacetamide can be used alternatively. The traded cyanoacetic acid is mainly iatended for the synthesis of the cough remedy dextromethorphan [125-71-3] (31) (61) (see Expectorants, antitussives, and related agents) and of the fungicide cymoxanil [57966-95-7] (32) (62) (see Fungicides,agricultural). 

The only reaction of this type noted involved the reaction of pteridines, e.g. (415), with malonodinitrile (or cyanoacetamide), via ring opening to (416), with final [6 + 0 ( )] cyclization to give the 6-amino-7-nitrile (amide) (417) (73JCS(P1)1615, 73JCS(P1)1974). 

Quinolin-2-one, 5,6,7,8-tetrahydro-synthesis, 2, 404 from cyanoacetamide, 2, 460 Quinoin-4-one, 1-alkyl-antibacterial activity, 1, 180 Quinolin-4-one, 2-amino-synthesis... 

Cyano-4,6-dlmethyl-2-pyrldone (7) Pentane 2 4 dione 5 (4 85 g 48 5 mmol), cyanoacetamide 6 (4 S g, S3 mmol) and piperidine (2 mL) in EtOH (SO mL) were heated to reflux for 45 mm The product crystallized on cooling Recrystallizatlon from ElOH gave 5 5 4 g of 7 (63 68%) mp298-300 C... 

Cyanoacetamide [107-91-5] M 84.1, m 119.4°. Crystd from MeOH/dioxane (6 4), then water. Dried over P2O5 under vacuum. 

The base-catalysed isomerisation of thiazoles to imidazoles initially reported by Cook et al " has been further investigated more recently. One notable example reports the reaction of 2-amino-2-cyanoacetamide 37 with benzylisothiocyanate to give 5-... 

Cyanoacetamides and their C=S and C=Se analogs in synthesis of heterocycles 99UK817. 

The condensation of aromatic o-nitrosoamines with cyanoaeetic acid or cyanoacetamide affords an unambiguous synthesis of un-... 

CN/CC replacement has also been observed on treatment of pteridine with malonitrile or cyanoacetamide 6-amino-7-R-pyrido[2,3,-h]pyrazine (R = CN, CONH2) beingformed (73JCSP(1)1615) (Scheme 15). The reaction involves initial addition of the reagent to the N-3-C-4 bond, scission of the dihydro bond between N-3 and C-4 in the covalent adduct, and recycli-zation. This mechanism is fundamentally different from the mechanism mentioned in Scheme 14, where two molecules of the reagent were used for addition and where the bond breaking takes place between N-1 and C-2. 

A thioamide of isonicotinic acid has also shown tuberculostatic activity in the clinic. The additional substitution on the pyridine ring precludes its preparation from simple starting materials. Reaction of ethyl methyl ketone with ethyl oxalate leads to the ester-diketone, 12 (shown as its enol). Condensation of this with cyanoacetamide gives the substituted pyridone, 13, which contains both the ethyl and carboxyl groups in the desired position. The nitrile group is then excised by means of decarboxylative hydrolysis. Treatment of the pyridone (14) with phosphorus oxychloride converts that compound (after exposure to ethanol to take the acid chloride to the ester) to the chloro-pyridine, 15. The halogen is then removed by catalytic reduction (16). The ester at the 4 position is converted to the desired functionality by successive conversion to the amide (17), dehydration to the nitrile (18), and finally addition of hydrogen sulfide. There is thus obtained ethionamide (19)... 

Morpholino-2heated under reflux for 4 hours. The initial reflux temperature was 117°C and the final reflux temperature was 82°C. 

Dimethyl tubocurarine Iodide Cyanacetamid Ethionamide Protionamide Cyanamide Albendazole Butalamine HCl Cimetide Cyanoacetamide Allopurinol Cyanoacetic acid Aminometradine Amisometradine Cyclopentamine HCl Sulindac... 

More general processes rely on variations of the Guareschi-Thorpe reaction [14] where condensations between 1,3-dicarbonyls and cyanoacetamide yield functionalized monocyclic 2(lff)-pyridones (a and b. Scheme 2) [15, 16]. Unless the carbonyls are sufficiently different in reactivity, the reaction suffers from poor regioselectivity. The use of 3-alkoxy or 3-amino enones instead of 1,3-dicarbonyls has proven to be a versatile and reliable synthetic methodology where the 1,4-addition controls the regioselective outcome (c and d. Scheme 2) [17-19]. 

The condensation between enaminones and cyanoacetamide is a well-established method for the synthesis of 2-pyridones (see c, Scheme 2, Sect. 2.1), and the use of malonodinitrile instead of the amide component has also been shown to yield 2-pyridones [39-41]. Recently, Gorobets et al. developed a microwave-assisted modification of this reaction suitable for combinatorial synthesis, as they set out to synthesize a small library of compounds containing a 2-pyridone scaffold substituted at the 3, 5, and 6-positions [42]. The 2-pyridones were prepared by a three-component, two-step reaction where eight different carbonyl building blocks were reacted with N,N-dimethylformamide dimethyl acetal (DMFDMA) to yield enaminones 7 (Fig. 2). The reactions were performed under solvent-free conditions at el-... 

Reaction of 1,3-dicarbonyl compounds with IVJV-dimethylformamide dimethyl acetal followed by malonamide in the presence of sodium hydride gives 5,6-disubstituted 1,2-dihydro-2-oxopyridine-3-carboxamides, whereas reaction of the intermediate enamines with cyanothioacetamide or cyanoacetamide in the presence of piperidine provides 2-thioxopyridine-3-carboxamides and 4,5-disubstituted l,2-dihydro-2-oxopyridine-3-carboxamides, respectively <95S923>. P-Enaminonitriles 14 react with p-ketoesters and alkyl malonates, in the presence of stoichiometric amounts of tin(IV) chloride, to afford 4-aminopyiidines 15 and 4-amino-2-pyridones 16 <95T(51)12277>. 

Compounds such as malonic esters, malonamide and cyanoacetamide, in which a —CH— or —CHg— group is situated between —COjR, —CN, or —CONH— groups. 

---