Crude oil-distillation products

The petrochemical industry, that branch of the chemical industry which is based on the exploitation of the crude-oil distillation products, has turned... 

Duyck et al (2002) determined Ag, Al, Ba, Cd, Co, Cu, Fe, La, Mg, Mo and Mn in residual fuel oil and crude oils by ICP-MS after dilution of the samples in toluene, using ultrasonic nebulization. Good accuracy was reported for the determinations of the metals. Wondimu et al (2000) analysed residual fuel oil for Ag, Al, As, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe and Hg by ICP-MS after micro-wave acid decomposition. H2O2 was used after acid decomposition for better carbon removal. Lord (1991) determined Li, Al, Ti, V, Mn, Fe, Co, Ni, Cu, Zn, Sr, Mo, Ag, Cd, Sn, Sb, Ba and Pb in crude oils by ICP-MS with mciro-emulsion sample introduction. Kowalewska et al (2005) determined Cu in crude oils and crude oil distillation products by ICP-MS after ashing and micro-wave assisted decomposition of analyte and transferred to aqueous solution. Good recovery of Cu was reported. Kelly et al (2003) determined Hg in crude oils and refined products by cold Vapor ICP-MS after decomposition of the sample by closed system combustion. Botto (2002) analysed crude oil, petroleum naphthas and tars for Na, P, Ti, V, Mn, Fe, Co, Ni, Cu, Zn, As, Y, Mo, Cd, Sn, Sb,... 

Kowalewask Z., Ruszezynska, E., (2005), Cu determination in crude oil distillation, products by atomic absorption and inductively coupled plasma mass spectrometry after analyte transfer to aqueous solution, Spectrochim. Acta, 60B, 351-359. 

---