Cracking catalysts amorphous silica-alumina clay

Acid-treated clays were the first catalysts used in catalytic cracking processes, but have been replaced by synthetic amorphous silica-alumina, which is more active and stable. Incorporating zeolites (crystalline alumina-silica) with the silica/alumina catalyst improves selectivity towards aromatics. These catalysts have both Fewis and Bronsted acid sites that promote carbonium ion formation. An important structural feature of zeolites is the presence of holes in the crystal lattice, which are formed by the silica-alumina tetrahedra. Each tetrahedron is made of four oxygen anions with either an aluminum or a silicon cation in the center. Each oxygen anion with a -2 oxidation state is shared between either two silicon, two aluminum, or an aluminum and a silicon cation. 

Although cracking also occurs on chlorine-treated clays and amorphous silica-aluminas, the application of zeolites has resulted in a significant improvement in gasoline yield. The finite size of the zeolite micropores prohibits the formation of large condensed aromatic molecules. This beneficial shape-selectivity improves the carbon efficiency of the process and also the lifetime of the catalyst. 

The activity advantage of zeolite catalysts over amorphous silica-alumina has well been documented, Weisz and his associates [1] reported that faujasite Y zeolite showed 10 to 10 times greater activity for the cracking of n-hexane than silica-alumina. Wang and Lunsford et al. [2] also noted that acidic Y zeolites were active for the disproportionation of toluene while silica-alumina was inactive. The activity difference between zeolite and silica-alumina has been attributed to their acidic properties. It is, however, difficult to explain the superactivity of zeolite relative to silica-alumina on the basis of acidity, since the number of acid sites of Y-type zeolite is only about 10 times larger than that of silica-alumina. To account for it, Wang et al. [2] proposed that the microporous structure of zeolite enhanced the concentration of reactant molecules at the acid sites. The purpose of the present work is to show that such a microporous effect is valid for pillared clay catalysts. 

Various kinds of oxide materials, including single oxides, mixed oxides, molybdates, heteropoly-ions, clays, and zeolites, are used in catalysis they can be amorphous or crystalline, acid or basic. Furthermore the oxides can be the actual catalysts or they can act as supports on which the active catalysts have been deposited. Silica and alumina are commonly used to support both metals and other metal oxide species. Amorphous silica/alumina is a solid acid catalyst, it is also used as a support for metals, when bifunctional (acid and metal) catalysis is required, e.g., in the cracking of hydrocarbons. Other acid catalysts are those obtained by the deposition of a soluble acid on an inert support, such as phosphoric acid on silica (SPA, used in the alkylation of benzene to cumene. Section 5.2.3). They show similar properties to those of the soluble parent acids, while allowing easier handling and fixed bed operation in commercial units. 

It has been a long time since mineral clays like montmorillonite were discovered to have strong acidity in the solid state. Moreover, clays had been utilized as catalysts for catalytic cracking to produce gasoline before amorphous silica-alumina and zeolites were invented. At the present time, besides use as catalysts, clay is being utilized in a variety of fields medicine, paint, cosmetics, detergent, and casting. 

Regarding their use as cracking and isomerization catalysts, bulk oxides such as clays and amorphous silica-aluminas have been widely displaced by molecular sieve compounds (e.g., zeolites, aluminophosphates), whose well-defined pore structures generally offer higher selectivity and flexibility. Nevertheless, bulk oxides continue to be used for various cracking and isomerization applications in the petroleum industry. 

The main components of FCC catalysts are Zeolite Y, e.g., REY orUSY as the major active component (10 to 50%), and a binder that is typically an amorphous alumina, silica-alumina, or clay material. In addition to these main components, other zeolite components, e.g., ZSM-5, and other oxide or salt components are quite frequently used additives in the various FCC catalysts available on the market. The addition of 1 to 5% ZSM-5 increases the octane number of the gasoline. ZSM-5 eliminates feed compounds with low octane numbers because it preferentially center-cracks n-paraffins producing butene and propene [14], These short-chain olefins are then used as alkylation feedstocks... 

---