Covalency, ferrocene

Functionalized conducting monomers can be deposited on electrode surfaces aiming for covalent attachment or entrapment of sensor components. Electrically conductive polymers (qv), eg, polypyrrole, polyaniline [25233-30-17, and polythiophene/23 2JJ-J4-j5y, can be formed at the anode by electrochemical polymerization. For integration of bioselective compounds or redox polymers into conductive polymers, functionalization of conductive polymer films, whether before or after polymerization, is essential. In Figure 7, a schematic representation of an amperomethc biosensor where the enzyme is covalendy bound to a functionalized conductive polymer, eg, P-amino (polypyrrole) or poly[A/-(4-aminophenyl)-2,2 -dithienyl]pyrrole, is shown. Entrapment of ferrocene-modified GOD within polypyrrole is shown in Figure 7. 

Next, consider how Fe " interacts with C5H5. Examine the geometry of ferrocene, Fe(C5H5)2. Are the FeC distances all the same, or does iron bond more strongly to some carbons than to others Are the CC bond distances all the same Which of the above models, the electrostatic or covalent, gives the better description ... 

Asymmetric catalysis using chiral ligands, including cyclic phosphine or pyra-zole fragments covalent-bonded with ferrocene system 98PAC1477. 

Over the past decade a number of new covalently bonded TTF/ferrocene adducts have been reported [77, 78]. The crystal structure of the l,l -bis(l,3-dithiole-2-ylidine)-substituted ferrocene derivative has been published [77]. In this complex, ferrocene has essentially been incorporated as a molecular spacer between the two l,3-dithole-2-ylidene rings forming a stretched TTF molecule. This adduct, and its methyl-substituted derivative, have been combined with TCNQ to form charge-transfer complexes with room temperature powder conductivities of 0.2 S cm-1. Similar diferrocenyl complexes have been prepared with bis (dithiolene) metal complexes [79, 80]. 

Ru-Os-bis(2,2 6, 2") terpyridine complexes attached to biphenyl spacer groups [273] and the electron transport characteristics of ferrocene covalently bound to OPE rods [274] or oligoaniline junctions [275]. 

In contrast to the molecular wire of molecular interface, electron mediators are covalently bound to a redox enzyme in such a manner as an electron tunneling pathway is formed within the enzyme molecule. Therefore, enzyme-bound mediators work as molecular interface between an enzyme and an electrode. Degani et al. proposed the intramolecular electron pathway of ferrocene molecules which were covalently bound to glucose oxidase [ 4 ]. However, few fabrication methods have been developed to form a monolayer of mediator-modified enzymes on the electrode surface. We have succeeded in development of a novel preparation of the electron transfer system of mediator-modified enzyme by self-assembly in a porous gold-black electrode as schematically shown in Fig.12 [14]. 

To overcome the poor stability of ferrocene-mediated enzyme sensors, mediator-modified electrodes have been used. In the case of glucose oxidase, the cofactor FAD is deeply buried within the protein matrix. The depth of the active center is estimated to be 0.87 nm. Therefore, one cannot expect that the mediator covalently attached to the electrode surface via a short spacer retain the possibility of closely approaching the cofactor of the enzyme. 

Mizutani et al. [16] have demonstrated that ferrocene derivatives, attached by means of covalent bonds to the surface of bovine serum albumin, have been able to mediate the electron transfer between the glucose oxidase and the electrode through the osemium complex. 

In contrast to the mediator-modified electrodes, Degani et al. modified glucose oxidase itself by means of covalently bound ferrocene [4]. After modifying enzymes with ferrocene carboxylic acid, they observed direct electron transfer from the active site of the enzyme to a gold or platinum... 

Fig. 18b.9. Example cychc voltammograms due to (a) multi-electron transfer redox reaction two-step reduction of methyl viologen MV2++e = MV++e = MV. (b) ferrocene confined as covalently attached surface-modified electroactive species—peaks show no diffusion tail, (c) follow-up chemical reaction A and C are electroactive, C is produced from B through irreversible chemical conversion of B, and (d) electrocatalysis of hydrogen peroxide decomposition by phosphomolybdic acid adsorbed on a graphite electrode.

Zhao, H., et al., Synthesis, characterization, and photophysical properties of covalent-linked ferrocene-porphyrin-single-walled carbon nanotube triad hybrid. Carbon, 2012. 50(13) ... 

Liu et al. [140] have also used this interface for an electrochemical immunosensor for small molecules (Figure 1.26). In this sensor, one end of the molecular wire is attached to ferrocene dimethylamine with a covalent link formed between one of the amine group son the ferrocene and the carboxyl group on the wire. To the other amine is attached the antibody-binding epitope for the antibody, in this proof-of-concept study the epitope is biotin. Electron transfer can be readily achieved to the ferrocene molecule but upon antibody binding to this interface, the electrochemical signal is dramatically reduced. 

The third approach has been to graft the redox couple by means of a covalent bond to the polyelectrolyte backbond as described early in 1965 in the book of Cassidy and Run [20]. Several of these systems are charged polymers in at least one oxidation state, like poly(viologen), poly(vinylferrocene), and so on. Examples of polyelectrolytes like polyacrylic acid with covalently bound viologen were reported by Fernandez, Katz and coworkers [21], hydroquinone [22] and Anson et al. with bound ferrocene [23]. 

The original concepts of metal-ligand bonding were essentially related to the dative covalent bond the development of organometallic chemistry has revealed a further way in which ligands can supply more than one electron pair to a central atom. This is exemplified by the classical cases of bis(benzene)chromium and bis(cyclopentadienyl)iron, trivial name ferrocene. These molecules are characterised by the bonding of a formally unsaturated system (in the organic chemistry sense, but expanded to include aromatic systems) to a central atom, usually a metal atom. 

In contrast to ferrocenes, osmium and ruthenium complexes are capable of forming coordinative bonds with donor centers of GO including histidine imidazoles. There are therefore two ways of bringing coordinated transition metals onto enzyme surfaces, i.e., via natural and artificial donor sites. Artificial centers are commonly made of functionalized pyridines or imidazoles, which must be covalently attached to GO followed by the complexation of an osmium or... 

Following our recent report on the first intramolecular electron transfer within a photoexcited SWNT and ferrocene moieties covalently linked to it (Scheme 9.19),68 a... 

---