Copolymers Terms Links

KEY TERMS transition metal complex ion copolymers cross-linked polymers... 

Haward et al.t have reported some research in which a copolymer of styrene and hydroxyethylmethacrylate was cross-linked by hexamethylene diisocyanate. Draw the structural formula for a portion of this cross-linked polymer and indicate what part of the molecule is the result of a condensation reaction and what part results from addition polymerization. These authors indicate that the crosslinking reaction is carried out in sufficiently dilute solutions of copolymer that the crosslinking is primarily intramolecular rather than intermolecular. Explain the distinction between these two terms and why concentration affects the relative amounts of each. 

The term ABS was originally used as a general term to describe various blends and copolymers containing acrylonitrile, butadiene and styrene. Prominent among the earliest materials were physical blends of acrylonitrile-styrene copolymers (SAN) (which are glassy) and acrylonitrile-butadiene copolymers (which are rubbery). Such materials are now obsolete but are referred to briefly below, as Type 1 materials, since they do illustrate some basic principles. Today the term ABS usually refers to a product consisting of discrete cross-linked polybutadiene rubber particles that are grafted with SAN and embedded in a SAN matrix. 

Modern SEC columns are packed with material other than polystyrene gels, such as porous silica particles or highly cross-linked styrene-divinylbenzene copolymers. Because of improvements in speed and resolution, the term SEC is sometimes replaced by the term high-performance size-exclusion chromatography (HPSEC). 

Polymers with a sizable number of ionic groups and a relatively nonpolar backbone are known as ionomers. The term was first used for copolymers of ethylene with carboxylated monomers (such as methacrylic acid) present as salts, and cross-linked thermoreversibly by divalent metal ions. Such polymers are useful as transparent packaging and coating materials. Their fluorinated forms have been made into very interesting ion-exchange membranes (considered further below). 

KEY TERMS hydrophobic hydrophilic monomer cross-linking polymer copolymer hydrogel... 

Poly(butyl methacrylate) (PBMA) began to be used as a picture varnish in the early 1930s. It encountered a considerable success because of its resistance to yellowing, adequate flexibility, no dirt pick-up and good solubility in nonpolar hydrocarbon solvents. Products based on PBMA, such as Elvacite 2044 and Elvacite 2045 by Du Pont, were abandoned when it was discovered that under light exposure they cross-link to an unexpected extent becoming insoluble [64]. From this point of view acrylic copolymers based on methyl and ethyl acrylates/methacrylates show a much better long-term stability. 

Chien and Cada [42] have prepared optically active and photoactive SCLC copolymers, 15, with the 4-alkoxyphenyl-4 -alkoxycinnamate chromophore, with the intention of creating LC polysiloxane networks that could be used to prepare macroscopically oriented organic ferroelectric polymers for electro-optical devices. Optical activity was introduced into the polymer by the use of a chiral spacer. Those copolymers which were mesogenic exhibited properties characteristic of a Sc. phase. UV-irradiation of thin films of the polymers in their mesomorphic states at 90°C, led to a loss of the IR absorption at 1635 cm-1 that is due to the cinnamate double bond, and to cross-linking. Long-term irradiation led to... 

For PEMFCs, the solid electrolytes are polymer membranes polymers modified to include ions, usually sulfonic groups. One of the most widely used membranes today is the polymer Nafion , created by the DuPont company. These membranes have aliphatic perfluorinated backbones with ether-linked side chains ending in sulfonate cation exchange groups [6, 7], Nafion is a copolymer of tetrafluoroethylene and sulfonyl fluoride vinyl ether [8] and has a semi-crystalline structure [9], This structure (which resembles Teflon ) gives Nafion long-term stability in oxidative or reductive conditions. The sulfonic groups of the polymers facilitate the transport of protons. The polymers consist of hydrophilic and hydrophobic domains that allow the transport of protons from the anode to the cathode [10, 11],... 

The most important monomers for the production of polyolefins, in terms of industrial capacity, are ethylene, propylene and butene, followed by isobutene and 4-methyl-1-pentene. Higher a-olefins, such as 1-hexene, and cyclic monomers, such as norbornene, are used together with the monomers mentioned above, to produce copolymer materials. Another monomer with wide application in the polymer industry is styrene. The main sources presently used and conceivably usable for olefin monomer production are petroleum (see also Chapters 1 and 3), natural gas (largely methane plus some ethane, etc.), coal (a composite of polymerized and cross-linked hydrocarbons containing many impurities), biomass (organic wastes from plants or animals), and vegetable oils (see Chapter 3). 

---