Properties copolymers

CHEOPS is based on the method of atomic constants, which uses atom contributions and an anharmonic oscillator model. Unlike other similar programs, this allows the prediction of polymer network and copolymer properties. A list of 39 properties could be computed. These include permeability, solubility, thermodynamic, microscopic, physical and optical properties. It also predicts the temperature dependence of some of the properties. The program supports common organic functionality as well as halides. As, B, P, Pb, S, Si, and Sn. Files can be saved with individual structures or a database of structures. 

Random insertion of ethylene as comonomer and, in some cases, butene as termonomer, enhances clarity and depresses the polymer melting point and stiffness. Propylene—butene copolymers are also available (47). Consequendy, these polymers are used in apphcations where clarity is essential and as a sealant layer in polypropylene films. The impact resistance of these polymers is sligbdy superior to propylene homopolymers, especially at refrigeration temperatures, but still vastiy inferior to that of heterophasic copolymers. Properties of these polymers are shown in Table 4. 

The synthesis of his[3-(2-a11y1phenoxy)phtha1imides] and their copolymer properties with BMI have been reported (43). These allylphenoxyimide—BMI copolymers provide toughness and temperature resistance when used in carbon fiber laminates (44). 

Propenylphenoxy compounds have attracted much research. BMI—propenylphenoxy copolymer properties can be tailored through modification of the backbone chemistry of the propenylphenoxy comonomer. Epoxy resins may react with propenylphenol (47,48) to provide functionalized epoxies that may be low or high molecular weight, Hquid or soHd, depending on the epoxy resin employed. Bis[3-(2-propenylphenoxy)phthalimides] have been synthesized from bis(3-rutrophthalimides) and o-propenylphenol sodium involving a nucleophilic nitro displacement reaction (49). They copolymerize with bismaleimide via Diels-Alder and provide temperature-resistant networks. 

CEECON Acetal Copolymer Properties, Brochure 10M, Celanese Corp., New York, June 1983. 

Poly(starch-g-(l-amidoethylene)) copolymer is not a polyelectrolyte and will be a smaller molecule in water than an equal molecular weight, partially hydrolyzed poly(l-amidoethylene). Polyelectrolyte effect should, however, cause the graft copolymer to expand in solution in the same way it causes poly(l -amidoethylene) to expand, so a series of hydrolyzed graft copolymers were prepared from poly(starch-g-(l-amidoethylene))(41-43) and these derivatives were tested to determine the effect of hydrolysis on copolymer properties in solution. 

Cyclopentadienyl ligands have become extremely important in catalysis for metal such as Ti, Zr, and Hf (Chapter 10) and in academic studies of related elements such as Ta. Ethylene polymerisation with the use of CpiTiCE (alkylated with aluminium alkyl compounds) has been known for many decades, but the intensive interest in derivatives of these compounds started in the early 1980 s following the discovery of MAO (methaluminoxane - see chapter 10) which boosted metallocene catalyst activities by several orders of magnitude. Commercial interest focussed on ethylene copolymers (LLDPE where more homogeneous comonomer incorporation resulted in greatly improved copolymer properties) and in enantiospecific polymerisations for propene, styrene, etc. 

J.Heller, R.W.Baker, R.M. Gale and J.O.Rodin, Controlled release by polymer dissolution I. Partial esters of maleic anhydride copolymers—properties and theory, J. Appl. Polym. Sci, 22,1991 (1978). 

J. Kiesewetter, B. Arikan, and W. Kaminsky, Copolymerization of eth-ene with norbomene using palladium(II) a-diimine catalysts Influence of feed composition, polymerization temperature, and ligand structure on copolymer properties and microstructure, Polymer, 47 (10) 3302-3314, May 2006. 

Four olefins are used in industry to manufacture ethylene copolymers 1-butene, 1-hexene, 4-methyl-1-pentene. and 1-octene. Copolymers containing 1-butene account for approximately 40% of all LLDPE resins manufactured worldwide, 1-hexene copolymers for 35%, 1-octene copolymers for about 20%, and 4-mcthyl-l-pcntcnc copolymers for the rest. The type of o-olcliit exerts a significant influence oil tlie copolymer properties. 

The butadiene and butadiene-acrylic monomer systems polymerize when irradiated on PVC or vinyl chloride copolymer latex. The structure of the polymer obtained may be grafted if it can be proved that the copolymer properties are different from the blend properties. To elucidate the structure we studied a copolymer obtained by polymerizing butadiene-acrylonitrile on a PVC homopolymer lattice. Owing to practical reasons and to exclude the secondary effect of catalytic residues we used y radiation. However, we shall observe in a particular case the properties of peroxide-initiated graft copolymer. 

In line with the above discussion, the properties of grafts must also depend on the location of the graft copolymer. Properties such as abrasion, enhanced adhesion, wetting and so on only need surface modification. Flame retardancy, water sorbency, and certain other properties, on the other hand, need essentially bulk grafting. These differences can be achieved rather easily in practice and the differences have been clearly demonstrated in a number of cases. 

Dominguez, D. D. and Keller, T. M. Phthalonitrile-epoxy blends Cure behavior and copolymer properties, J. Appl. Polym. Sci. 2008,110, 2504-2515. 

Physical properties are related to ester-segment structure and concentration in thermoplastic polyether-ester elastomers prepared hy melt transesterification of poly(tetra-methylene ether) glycol with various diols and aromatic diesters. Diols used were 1,4-benzenedimethanol, 1,4-cyclo-hexanedimethanol, and the linear, aliphatic a,m-diols from ethylene glycol to 1,10-decane-diol. Esters used were terephthalate, isophthalate, 4,4 -biphenyldicarboxylate, 2,6-naphthalenedicarboxylate, and m-terphenyl-4,4"-dicarboxyl-ate. Ester-segment structure was found to affect many copolymer properties including ease of synthesis, molecular weight obtained, crystallization rate, elastic recovery, and tensile and tear strengths. 

---