Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Coordinate measurement machine

Automated inspection equipment Coordination measuring machines (CMM), machine vision systems, etc. [Pg.156]

The gages or instruments used must be able to measure the critical dimensions or characteristics of the material. One client used a coordinate measurement machine (CMM) to validate all measurements on the final products. Micrometers and calipers are used as in-process gages but the CMM is used to get the final result. [Pg.28]

Retrieved December 20, 2015, from http //www.coord3-cmm.com/50-years-of-coordinate-measuring-machine-industry-developments-and-histoiy/. [Pg.126]

From this definition we have to conclude that the term accuracy should be used just for general comparison, that is, a measurement or a measuring instmment is more accurate than another. An example a roundness measurement carried out on a roundness measurement machine (or roundness tester) is generally more accurate than a roundness measurement carried out on a three-axis coordinate measuring machine (CMM) if we use a high precision CMM, apply a precision rotary table on the CMM and apply a special probe system then the measurement with the CMM and the roundness measuring machine might be of the same accuracy. [Pg.8]

ISO 10360 (2000-2011) Geometrical product specifications (GPS) acceptance and reverification tests for coordinate measuring machines (CMM), part 1-7. ISO, Geneva... [Pg.10]

Coordinate Measuring Machine Fig. 1 Portal-type design CMM Leitz PMM-F 30207 for large-sized gear measurranents in climatized laboratory at the University of Bremen (Source BIMAQ — Bremen Institute fm Metrology, Automation and (Quality Science)... [Pg.286]

Measurements of milled grooves using a coordinate measuring machine clearly show the form deviations of the slot flanks. Figme 3 shows the exaggerated flank forms of slots milled with a 2-teeth cutter and with a 3-teeth cutter. [Pg.605]

Reliability the measuring system should be based on a reliable and robust technology, as well as be verified regularly according to well-defined and established procedures, such as the ISO 10360 series for coordinate measuring machines (e.g., ISO 2010, ISO 2011b). [Pg.703]

Five-axis milling machines with an integrated tactile coordinate measuring machine... [Pg.705]

ISO 10360-5 (2010) Geometrical Product Specifications (GPS) - Acceptance and reverification tests for Coordinate Measuring Machines (CMM) — Part 5 CMMs using single and multiple stylus contacting probing systems... [Pg.705]

Calibration of the six degree-of-fi-eedom errors in positioning of systems such as machine tools and coordinate measuring machines... [Pg.712]

Bosch JA (1995) Coordinate measuring machines and systems. Marcel Dekker, New York Bureau International des Poids et Mesures (BIPM) (2006) The international system of units (SI), 8th edn. http //www.bipm.org/en/si/si brochure/ European Association of National Metrology Institutes (EURAMET) (2008) Metrology - in short, 3rd edn. http //www.euramet.org/index.php id=mis JCGM 100 2008. GUM 1995 with minor corrections (2008) Evaluation of measurement data - guide to the expression of uncertainty in measurement (GUM)... [Pg.872]

B89.7.5 describes requirements for a particular interpretatiOTi of the VIM definition of metrological traceability. The goal of the report is a usable interpretation enabling producer/consumer transactions outside of a formal accreditation environment. The report includes examples of metrological traceability of factory floor measurements made with calipers and coordinate measuring machine (CMM) measurements. [Pg.1252]

Atomic Force Microscopy 62 Computed Tomography 242 Coordinate Measuring Machine 285... [Pg.1343]

FIGURE 6. C/C-SiC calibrating plate with 25 measurement holes for the calibration of coordinate measuring machines... [Pg.125]

N.A.Barakat, M.A. Elbestawi, A.D. Spence. Kinematic and geometric error compensation of a coordinate measuring machine. Machine Tool Manufacture International Jumal of Machine Tools and Manufacture. 2000, vol 40, pp. 833-850. [Pg.30]

VDI/VDE 2011 Accuracy of Coordinate Measuring Machines Characteristics and their Checking Acceptance and Reverification Tests of Laser Trackers (Diisseldorf Verein Deutscher Ingenieure) VDIADE 2617 part 10. [Pg.69]

J. Santolaria, J.J. Aguilar, J.A. Yague, J. Pastor, Kinematic parameter estimation technique for calibration and repeatability improvement of articulated arm coordinate measuring machines,... [Pg.75]

Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines, American Society of Mechanical Engineers New York, NY, USA (2004) ASME B89.4.22-2004. [Pg.75]

Acceptance and reverification tests for articulated arm coordinate measuring machines, Verein Deutscher Ingenieure (2009) VDIATJE 2617 Part 9. [Pg.75]

See other pages where Coordinate measurement machine is mentioned: [Pg.105]    [Pg.175]    [Pg.590]    [Pg.248]    [Pg.248]    [Pg.270]    [Pg.285]    [Pg.285]    [Pg.285]    [Pg.285]    [Pg.286]    [Pg.287]    [Pg.288]    [Pg.289]    [Pg.481]    [Pg.705]    [Pg.709]    [Pg.709]    [Pg.713]    [Pg.1232]    [Pg.125]    [Pg.200]    [Pg.277]    [Pg.9]    [Pg.56]    [Pg.70]   
See also in sourсe #XX -- [ Pg.28 ]



SEARCH



Coordinate measuring machine

Coordinate measuring machine

Coordinating measures

Machine coordinated-measuring

© 2024 chempedia.info