Contour profiles

The heart of these couplings is the flexing disc it is manufactured from vacuum-degassed alloy steel, forged with a radial-grain orientation, and has a contoured profile machined on high-precision equipment. 

The contoured profile is shown in Figure 18-8. The diaphragm undergoes axial deflection. The forces acting on the disc that are generating the stresses... 

The stresses imposed by axial deflection are much greater at the hub than at the rim as seen in Figure 18-9. Therefore, to maintain uniform stresses in the diaphragm when all the various forces acting on the diaphragm are at their maximum, the diaphragm must be used to connect the contoured profile at both the hub and the rim to reduce stresses. 

Figure 33. Tracer gas contour profiles—tracer injected via conical grid.

D.J. I ley, B.H. Khoshaim, J. Colloid Interface Set 59 (1977) 243 carbon steel, test of droplet contour profile analysis (a) SD, surface finish 180 grade of carborundum grinding powder (b) TP, surface finish ibid, (a) (c) SD, surface finish 600 grade of carborundum grinding powder (d) TP, surface finish ibid. (c). 

Figure 7. Contoured profiles of temperature (A), salinity (B), density (C), and chlorophyll a (D) on depth (10-100 m) between 42°30 N and 43°00 N on the Scotian Shelf. Increased shading indicates concentrations ranging from 1 to 5 mg/m (10).

In the case of 3D space-filled molecular models, one can represent the molecule by contour profiles, which are shape profiles calculated for all individual contours used to map the molecule. Each contour profile is then defined by a sequence ... 

Particular contour profiles are obtained by randomly distributed points over the surface of the molecule. 

Continuous Chirality Measure chirality descriptors continuous wavelet transforms spectra descriptors contour length size descriptors ( Kuhn length) contour profiles molecular profiles conventional bond order bond order indices conventional bond order ID number ID numbers core count ETA indices... 

Figure 3.1b shows the contour profiles of injection time-versus-capillary length. Two others (not shown) include voltage-versus-capillary length and... 

The two hydrogen atoms and oxygen are in the x, y coordinate plane. In Table 22 we collected for the leading entry of the contour profile the calculated averages in order to illustrate the degree of oscillations that reflect use of random numbers. As we see after use of 12,500 random points, the resulting c profile fluctuates around the fourth... 

Table 22. Variations in the Leading Entry of the Contour Profile for H2O as the Number of Random Points Increases...

FIGURE 18.17 (a) Comparison of thermal response as a result of internal short for the two large-format cell designs and (b) temperature contour profiles for the two cell designs at 10 s, 180 s and 360 s after incurring internal short of anode-cathode kind. Simulations are carried out at 80% SOC for both the designs at. (For color version, refer to the plate section.)... 

Bending deformation about a linear axis to form an angled or contoured profile. 

---