Compound, enamel

Aluminium liquid Aluminium paint Coating solution, 3, 3.1, 3.2, 3.3 Compound, enamel Driers, paint or varnish, liquid, n.o.s. Driers, paint or varnish, solid, n.o.s. Enamel Filler, liquid Ink, printer s, flammable Lacquer Lacquer base, liquid Lacquer base or lacquer chips, plastic, wet with alcohol or solvent Lacquer base, solution, 3.1, 3.2, 3.3 Lacquer, liquid Paint driers Paint (including paint, lacquer, enamel, stain, shellac, varnish, polish, liquid filler and liquid lacquer base), 3, 3.1, 3.2, 3.3,... 

Frit. A ceramic composition that has been fused, quenched to form a glass, and granulated. Frits form an important part of the batches used in compounding enamels and glazes the purpose of this pre-fusion is to render any soluble and/ or toxic components insoluble by causing them to combine with silica and other added oxides. 

Most of the acid-grade spar used for HF production ia the United States is imported. More than two-thkds of the fluorspar consumed ia the United States goes iato production of HF nearly 30% is consumed as a flux ia steelmaking and the remainder is consumed ia glass manufacture, enamels, welding rod coatings, and other end uses or products (see Fluorine compounds, inorganic-calcium). 

Fluoridation of potable water suppHes for the prevention of dental caries is one of the principal uses for sodium fluoride (see Water, municipal WATER treatment). Use rate for this appHcation is on the order of 0.7 to 1.0 mg/L of water as fluoride or 1.5 to 2.2 mg/L as NaF (2). NaF is also appHed topically to teeth as a 2% solution (see Dentifrices). Other uses are as a flux for deoxidiziag (degassiag) rimmed steel (qv), and ia the resmelting of aluminum. NaF is also used ia the manufacture of vitreous enamels, ia pickling stainless steel, ia wood preservation compounds, caseia glues, ia the manufacture of coated papers, ia heat-treating salts, and as a component of laundry sours. 

Adhesion of Enamel to Steel. Cobalt compounds are used both to color and to enhance adhesion of enamels to steel (55). Cobalt oxide is often incorporated into the ground frit at rates of 0.5—0.6 wt %, although levels from 0.2 to 3 wt % have been used. The frit is fired for ten minutes at 850°C to give a blue enamel that is later coated with a white cover coat. 

Coal-tar enamels are claimed to have better adherence than the asphaltic enamels to clean metal, probably because of the presence of polar compounds, but little difference can be noted in practice under proper pipelining conditions. 

At first, the program which investigated the packaging of irradiation-- processed foods, concentrated on the most advanced type of container, the tinplate can. It had performed successfully for a century as a container for thermoprocessed foods. However, as a container for the irradiation-processed foods, its physical, chemical, and protective characteristics had to be evaluated, including the effects of radiation on enamels and end-sealing compounds. This container was satisfactory for packaging foods that were irradiation sterilized while unfrozen (1, 2). 

A screening study for evaluating and selecting components of the tinplate container—tinplate, enamel, end-sealing compound, and side-seam solder—which were irradiated at designated doses and temperatures... 

The three irradiated end-sealing compounds had good adhesion to all the enamels except Enamel 5, the epoxy-wax enamel with aluminum... 

Production Test. In a small-scale production test, tinplate containers with two commercially available enamels and two end-sealing compounds, which were selected from the results of this study, performed satisfactorily when packed with beef and ham. Beef was irradiated with 4.5-5.6 Mrad at 5, —30, and —90°C ham was irradiated with 3-4 Mrad and 6-7.5 Mrad at —30°C. For this production test, beef and ham were packaged in round tinplate containers and ham in Pullman tinplate containers, frozen and refrigerated products were shipped 1,200 miles by truck, and were gamma irradiated at various doses and temperatures. Irradiated products were shipped 1,200 miles in a non-refrigerated truck and stored at selected temperatures and humidities. The integrity of the cans was evaluated after storage for 10 days, 3 months, and 6 months. 

The production test showed that the epoxy phenolic enamel was the preferred enamel for coating tinplate containers used in packaging irradiation-sterilized ham and beef. The preferred end-sealing compound for the same application was the blend of cured and uncured isobutylene-isoprene copolymer. 

The evaluation of the components of the tinplate container showed that the preferred enamel for irradiation processing was the epoxy phenolic the preferred end-sealing compound was the blend of cured and uncured isobutylene—isoprene copolymer. Component testing of tinplate and solder for possible changes in mechanical properties, microstructure, and corrosion resistance indicated that the radiation caused... 

Stannous fluoride, a compound of tin and fluorine, is much less dangerous. It is added to drinking water and toothpaste to strengthen the enamel in the teeth of the user. Another compound of fluorine is teflon, a plastic made of carbon and fluorine, which is used in kitchenware. The fluorine-containing compound freon is used in air-conditioners and refrigerators, and is harmless. 

---