Composite properties melting temperature

The thermal properties of PBS copolymer depend on the copolymer composition. The melting temperature and degree of ciystallinity decrease with the increase of the comonomer content when it is less than 30 mol%, as presented in Figs. 9 and 10 and Tables 3 and 4. When the comonomer content is less than 15 mol%, the copolymers still have a melting temperature higher than 100°C, which is preferred for real apphcations. 

In the late 1980s, new fully aromatic polyester fibers were iatroduced for use ia composites and stmctural materials (18,19). In general, these materials are thermotropic Hquid crystal polymers that are melt-processible to give fibers with tensile properties and temperature resistance considerably higher than conventional polyester textile fibers. Vectran (Hoechst-Celanese and Kuraray) is a thermotropic Hquid crystal aromatic copolyester fiber composed of -hydroxyben2oic acid [99-96-7] and 6-hydroxy-2-naphthoic acid. Other fully aromatic polyester fiber composites have been iatroduced under various tradenames (19). 

Relatively few processible polyimides, particularly at a reasonable cost and iu rehable supply, are available commercially. Users of polyimides may have to produce iutractable polyimides by themselves in situ according to methods discussed earlier, or synthesize polyimides of unique compositions iu order to meet property requirements such as thermal and thermoxidative stabilities, mechanical and electrical properties, physical properties such as glass-transition temperature, crystalline melting temperature, density, solubility, optical properties, etc. It is, therefore, essential to thoroughly understand the stmcture—property relationships of polyimide systems, and excellent review articles are available (1—5,92). 

We had no good way to predict if they would be liquid, but we were lucky that many were. The class of cations that were the most attractive candidates was that of the dialkylimidazolium salts, and our particular favorite was l-ethyl-3-methylimid-azolium [EMIM]. [EMIMJCl mixed with AICI3 made ionic liquids with melting temperatures below room temperature over a wide range of compositions [8]. We determined chemical and physical properties once again, and demonstrated some new battery concepts based on this well behaved new electrolyte. We and others also tried some organic reactions, such as Eriedel-Crafts chemistry, and found the ionic liquids to be excellent both as solvents and as catalysts [9]. It appeared to act like acetonitrile, except that is was totally ionic and nonvolatile. 

C and is easily processable, whereas the homopolymers do not melt before the onset of thermal degradation, at temperatures as high as 500°C.73,74 Varying copolymer composition permits the adjustment of melting temperature and of other properties (e.g., solubility) to desired values. This method is frequently used for aliphatic and aromatic-aliphatic polyesters as well. 

---