Collectors types

Older existing cartridge collector types have a range of actual operating efficiencies of 99 to 99.9% for PM,q and PMj j. Typical new equipment design efficiencies are between 99.99 and 99.999 -t- %. In addition, commercially available designs are able to control submicron PM (0.8 m in diameter or greater) with a removal efficiency of 99.999 + %. [Pg.411]

Operation Concen- tration Particle Sizes COLLECTOR TYPES Cyclone High Eff. Centrif- ugal USED IN INDUSTRY Wet Fabric Collector Arrester Hi-Volt See Electro- Remark static No. ... [Pg.232]

Coarse abrasive particles readily removed in primary collector types. [Pg.233]

Operation Concentration Particle Sizes Gravity COLLECTOR TYPES ... [Pg.235]

The type of collector and flowsheet configuration play an important role in gold recovery from these ores. With a flowsheet that uses bulk Cu-Pb flotation followed by Cu-Pb separation, the gold recovery is higher than that achieved with a sequential Cu-Pb flotation flowsheet. In laboratory tests, and Aerophine collector type, in combination with xanthate, had a positive effect on gold recovery as compared to either dithiophosphate or thionocarbamate collectors. Table 17.10 compares the metallurgical results obtained with an Aerophine collector to those obtained with a dithiophosphate collector. [Pg.16]

Effect of collector type on Cu-Pb-Zn-Au metallurgical results from a high-lead ore, Crandon (USA) Collector Product Weight (%) Assays (%, g/t) % Distribution... [Pg.17]

The collector type plays a significant role in PGM recovery from high-chromium ores. Collectors were examined in detail [19] on several high-chromium ores, where new collectors from the PM series were included in the evaluation. These collectors are... [Pg.37]

Collector type PGE rougher concentrate PGE rougher + Scavenger... [Pg.38]

During the development work, a fairly large number of reagent combinations were examined, mainly collector type and decoating reagents to improve lead-silver floatability. [Pg.84]

The effect of collector type on niobium rougher recovery is illustrated in Table 22.9. [Pg.121]

Effect of collector type on niobium rougher recovery. [Pg.121]

Collector type Addition (kg/t) Monazite concentrate Monazite tailings ... [Pg.166]

Collector Types Efficiency Costs ( /Wp, /kWh or /m2) Power Density (Wp /m2)... [Pg.100]

FIGURE 14.21 Integrated collector types (a) latent heat storage filling, as absorber (2A) (b) hybrid (air-liquid) collector. [Pg.317]

In the following, an overview of some collector types is given ... [Pg.303]

FIGURE 14 Comparative annual energy delivery at Phoenix, Arizona, for the collector types in Fig. 13. [Pg.142]

References Grade Polymer Solution Spinneret Diameter (mm) Spinneret-Target Distance (cm) Voltage (kV) Solution Feed Rate (mL/h) Collector Type Fiber Diameter (pm)... [Pg.212]

Effects of the temperature of the Kim, C. W., et al. collector, type of metal used as (2005) the collector, and postspinning treatment is reported. [Pg.293]

The parameters impacting the electrospinning process can be categorized into solution parameters (surface tension, concentration, viscosity and conductivity), processing conditions (voltage, distance from needle to collector, type of collector, flow rate) and ambient conditions (humidity, pressure and temperature) [90, 91]. Based on the interaction of all these factors, the morphology and size of resultant nanofibers can be changed. [Pg.280]

A diverse range of bipotentiostat controlled generator-collector-type electrochemical experiments have been developed over the last 60 years. ... [Pg.134]

It has long been observed that the nature of the grounded collector can greatly influence the characteristics of electrospun fiber (Zhang and Chang 2007 Kim et al. 2005). The scope for collector types is almost unlimited, with materials as diverse as paper, metallic foils, and liquids being previously employed (Liu and Hsieh 2002), among many others. [Pg.60]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...