Climbing drum test

Fig. 86. Various forms of the peel test (a) 180° T-peel test for flexible-to-flexible assembly (b) 180° peel test for flexible-to-rigid assembly (c) climbing drum test (d) floating roller test (dimensions in mm).

D 1781 Method for Climbing Drum Peel Test for Adhesives... 

ASTM D 1781-93 (1993) Standard Test Methodfor Climbing Drum peel for... 

The testing of the peel resistance occurs according to the standard DIN EN 1464 Adhesives - determination of peel resistance of high-strength bonded joints - climbing drum peel test (respectively, T-peel test) and serves the determination of the resistance of bonded metal joints to peeling forces (Figure 10.5). 

Figure 8 Some standard peel test geometries (a) T-peel test specimen, ASTM D-1876 (b) typical testing jig used in ASTM D-1876 (c) climbing drum peel test, ASTM D-1781 (d) 180° peel test, ASTM 903.

Clarke (7), as early as 1971, studied the behavior of a nitrile rubber modified, epoxy paste adhesive using the climbing drum peel strength test. Peeling resistance was... 

ASTM D1781-98 Standard method for climbing drum peel test for adhesives. 

ASTM D 1781-76—Climbing drum peel test for adhesives ASTM D 1876-72—Peel resistance of adhesives (T-peel test)... 

A T-peel test is shown in Fig. 27.2. The specimen is usually 1 in. (2.54 cm) wide and is described in Standard Test Method ASTM D1876 [6]. This specimen is symmetrical (both adherends are the same thickness). Other peel test specimens are not symmetrical, such as the floating roller peel test [7] or the climbing drum peel test [8]. The test measures the fracture resistance of an adhesive under conditions in which the adherends may plastically deform. In the tables presented later, the peel strength is given in Newtons per centimeter of width (N/cm) and in tmits of pounds per inch width (piw). The latter is shown in parenthesis. In some cases, the peel strength is derived from climbing drum peel measurements in which the results are presented in torque, in. Ib/in. For pressure sensitive adhe-... 

Specific tests of adhesion are described in more detail under the following articles Blister test, Climbing drum peel test, Fracture mechanics. Napkin ring test. Peel tests. Rubber to metal bonding - testing. Shear tests. Tensile tests. Wedge test and in Refs. [1-5] see also Standards for adhesives and adhesion and Appendix. 

Climbing drum peel test K B ARMSTRONG Peeling of metal sheet, for example, skin from honeycomb... 

Peel or Stripping Strength of Adhesive Bonds, Test for (D 903) Climbing Drum Peel Test for Adhesives, Method for (D 1781) Peel Resistance of Adhesives (T-Peel Test), Test for (D 1876) Evaluating Peel Strength of Shoe Sole Attaching Adhesives,... 

An alternative to the climbing drum peel test is the floating roller peel test, described in ASTM D3167-76. Direct comparisons cannot be made between the two tests because the floating roller test induces a more severe peel angle than the climbing drum. 

---