Chromium trioxide, reaction with

It has been claimed that chromium trioxide reacts with tetra-n-butylammonium chloride in water to produce tetra-n-butylammonium chromate, n-Bu4N+HCr04- [7], whereas benzyltriethylammonium dichromate is obtained from the closely analogous reaction of benzyltriethylammonium chloride with chromium trioxide in dilute hydrochloric acid [8]. 

Chromium trioxide reacts with pyridine in a highly exothermic reaction, resulting in the formation of the complex Cr03 2Py, which is soluble in organic solvents. A solution of this complex in pyridine is called Sarett... 

Grignard reaction with formaldehyde closer to our desired product. Subsequent hydrolysis will yield 2,2-dimethylbutanol our desired product is 2,2-dimethylbutanal. Oxidation of the primary alcohol to the aldehyde can be accomplished with Sarett s reagent, a combination of chromium trioxide (CrOs) with pyridine. 

The most abundant natural steroid is cholesterol. It can be obtained in large quantides from wool fat (15%) or from brain or spinal chord tissues of fat stock (2-4%) by extraction with chlorinated hydrocarbons. Its saturated side-chain can be removed by chromium trioxide oxidation, but the yield of such reactions could never be raised above 8% (see page 118f.). 

Usually, organoboranes are sensitive to oxygen. Simple trialkylboranes are spontaneously flammable in contact with air. Nevertheless, under carefully controlled conditions the reaction of organoboranes with oxygen can be used for the preparation of alcohols or alkyl hydroperoxides (228,229). Aldehydes are produced by oxidation of primary alkylboranes with pyridinium chi orochrom ate (188). Chromic acid at pH < 3 transforms secondary alkyl and cycloalkylboranes into ketones pyridinium chi orochrom ate can also be used (230,231). A convenient procedure for the direct conversion of terminal alkenes into carboxyUc acids employs hydroboration with dibromoborane—dimethyl sulfide and oxidation of the intermediate alkyldibromoborane with chromium trioxide in 90% aqueous acetic acid (232,233). 

Again, as with pyridopyrimidines, the main reaction is oxidation of di- or poly-hydro derivatives to fully aromatic structures, often merely by air or oxygen. In some cases the reagent of choice is mercury(II) oxide, whilst other reagents used include sulfur, bromine, chloranil, chromium trioxide-acetic acid, hydrogen peroxide, and potassium ferricyanide, which also caused oxidative removal of a benzyl group in the transformation (306) (307)... 

If homolytic reaction conditions (heat and nonpolar solvents) can be avoided and if the reaction is conducted in the presence of a weak base, lead tetraacetate is an efficient oxidant for the conversion of primary and secondary alcohols to aldehydes and ketones. The yield of product is in many cases better than that obtained by oxidation with chromium trioxide. The reaction in pyridine is moderately slow the intial red pyridine complex turns to a yellow solution as the reaction progresses, the color change thus serving as an indicator. The method is surprisingly mild and free of side reactions. Thus 17a-ethinyl-17jS-hydroxy steroids are not attacked and 5a-hydroxy-3-ket-ones are not dehydrated. 

Acid (69)." To a well-stirred mixture of 108 g (0.232 mole) of cholesterol acetate and 1.2 liters of glacial acetic acid is added over a period of 2 hr, a solution of 70 g of chromium trioxide in 200 ml of 50 % glacial acetic acid. The reaction mixture is maintained at a temperature of 55°. Upon completion of the addition, the mixture is stirred for an additional 2 hr at 55°. Excess chromic acid is destroyed by addition of 60 ml of methanol, and then 800 ml of acetic acid is removed by distillation under reduced pressure at a bath temperature of 40°. The remaining liquid is diluted with 50 ml of water and allowed to stand for 12 hr. The crystalline 7-ketocholesterol acetate which separates is removed by filtration and washed with 80 % acetic acid to yield 33.3 g (35%) of (68) mp 149-152°. 

In a typical Knof procedure, 3jS-hydroxyandrost-5-en-17-one acetate is epoxidized with perbenzoic acid (or m-chloroperbenzoic acid ) to a mixture of 5a,6a- and 5)5,6)5-epoxides (75) in 99 % yield. Subsequent oxidation with aqueous chromium trioxide in methyl ethyl ketone affords the 5a-hydroxy-6-ketone (76) in 89% yield. Baeyer-Villiger oxidation of the hydroxy ketone (76) with perbenzoic acid (or w-chloroperbenzoic acid ) gives keto acid (77) in 96% yield as a complex with benzoic acid. The benzoic acid can be removed by sublimation or, more conveniently, by treating the complex with benzoyl chloride and pyridine to give the easily isolated )5-lactone (70) in 40% yield. As described in section III-A, pyrolysis of j5-lactone (70) affords A -B-norsteroid (71). Knof used this reaction sequence to prepare 3)5-hydroxy-B-norandrost-5-en-17-one acetate, B-noran-... 

Hexafluoropropene is converted to its 1,2-epoxide in 55% yield by bubbling through a solution of chromium tnoxide in fluorosulfonic acid [8], the analogous reaction with a mixture of chromium trioxide and dichromium tnoxide gives pentafluoroacetonyl fluorosulfate [.5] (equation 6)... 

The intermediacy of dipolar species such as 186 has been demonstrated by reaction of enamines with 2-hydroxy-1-aldehydes of the aromatic series (129). The enamine (113) reacts in benzene solution at room temperature with 2-hydroxy-1-naphthaldehyde to give the crystalline adduct (188) in 91 % yield. Oxidation with chromium trioxide-pyridine of 188 gave 189 with p elimination of the morpholine moiety. Palladium on charcoal dehydrogenation of 189 gave the known 1,2-benzoxanthone (129). 

The immediate outcome of the Hantzsch synthesis is the dihydropyridine which requires a subsequent oxidation step to generate the pyridine core. Classically, this has been accomplished with nitric acid. Alternative reagents include oxygen, sodium nitrite, ferric nitrate/cupric nitrate, bromine/sodium acetate, chromium trioxide, sulfur, potassium permanganate, chloranil, DDQ, Pd/C and DBU. More recently, ceric ammonium nitrate (CAN) has been found to be an efficient reagent to carry out this transformation. When 100 was treated with 2 equivalents of CAN in aqueous acetone, the reaction to 101 was complete in 10 minutes at room temperature and in excellent yield. 

A 1-liter flask is equipped with a magnetic stirrer, a thermometer immersed in the reaction mixture, and a drying tube. In the flask is placed 100 ml of anhydrous pyridine, and the flask is cooled in an ice-water bath to 15-20° (lower temperatures impede the complex formation). Chromium trioxide (80 g) is added in small portions to the stirred solvent at a rate so as to keep the temperature below 30°. After about one-third of the chromium trioxide has been added, the yellow complex begins to precipitate. At the end of the addition (about 1 hour), a slurry of the yellow complex in pyridine remains. (This form of the complex is apparently a microcrystalline form and is very difficult to handle.)... 

DMF is often used as a solvent in oxidation reactions. Thus, in the reaction below, the medium combusts when chromium trioxide in the solid state comes into contact with the reagents ... 

---