Chiral Mn

The Jacobsen-Katsuki epoxidation reaction is an efficient and highly selective method for the preparation of a wide variety of structurally and electronically diverse chiral epoxides from olefins. The reaction involves the use of a catalytic amount of a chiral Mn(III)salen complex 1 (salen refers to ligands composed of the N,N -ethylenebis(salicylideneaminato) core), a stoichiometric amount of a terminal oxidant, and the substrate olefin 2 in the appropriate solvent (Scheme 1.4.1). The reaction protocol is straightforward and does not require any special handling techniques. 

To date, a wide variety of structurally different chiral Mn(III)salen complexes have been prepared, of which only a handful have emerged as synthetically useful catalysts. By far the most widely used Mn(III)salen catalyst is the commercially available Jacobsen catalyst wherein R= -C4H8- and R = = i-Bu (Scheme 1.4.1). In... 

In 1990, Jacobsen and subsequently Katsuki independently communicated that chiral Mn(III)salen complexes are effective catalysts for the enantioselective epoxidation of unfunctionalized olefins. For the first time, high enantioselectivities were attainable for the epoxidation of unfunctionalized olefins using a readily available and inexpensive chiral catalyst. In addition, the reaction was one of the first transition metal-catalyzed... 

Song and Roh investigated the epoxidation of compounds such as 2,2-dimethylchromene with a chiral Mn (salen) complex (Jacobsen catalyst) in a mixture of [BMIM][PFg] and CH2CI2 (1 4 v/v), using NaOCl as the oxidant (Scheme 5.2-12) [62]. 

A breakthrough in the area of asymmetric epoxidation came at the beginning of the 1990s, when the groups of Jacobsen and Katsuki more or less simultaneously discovered that chiral Mn-salen complexes (15) catalyzed the enantioselective formation of epoxides [71, 72, 73], The discovery that simple achiral Mn-salen complexes could be used as catalysts for olefin epoxidation had already been made... 

Ten years after Sharpless s discovery of the asymmetric epoxidation of allylic alcohols, Jacobsen and Katsuki independently reported asymmetric epoxidations of unfunctionalized olefins by use of chiral Mn-salen catalysts such as 9 (Scheme 9.3) [14, 15]. The reaction works best on (Z)-disubstituted alkenes, although several tri-and tetrasubstituted olefins have been successfully epoxidized [16]. The reaction often requires ligand optimization for each substrate for high enantioselectivity to be achieved. 

Only a few years after the development of the homogeneous chiral Mn(salen) complexes by Jacobsen and Katsuki, several research groups began to study different immobiUzation methods in both liquid and soUd phases. Fluorinated organic solvents were the first type of Uquid supports studied for this purpose. The main problem in the appUcation of this methodology is the low solubility of the catalytic complex in the fluorous phase. Several papers were pubUshed by Pozzi and coworkers, who prepared a variety of salen ligands with perfluorinated chains in positions 3 and 5 of the saUcyUdene moiety (Fig. 2). 

The insoluble polymer-supported Rh complexes were the first immobilized chiral catalysts.174,175 In most cases, however, the immobilization of chiral complexes caused severe reduction of the catalytic activity. Only a few investigations of possible causes have been made. The pore size of the insoluble support and the solvent may play important roles. Polymer-bound chiral Mn(III)Salen complexes were also used for asymmetric epoxidation of unfunctionalized olefins.176,177... 

It was a major improvement when Jacobsen and associates subsequently Kat-suki and colleagues discovered the chiral Mn(III) complexes for the enantiose-... 

Burrow et al. examined aziridination with chiral Mn(salen) in the presence of PhI=NTs, but no enantioselectivity was observed.160 However, Katsuki et al. reported that the aziridination of styrene with complex (52) showed moderate enantioselectivity, though the chemical yield was poor (Scheme 38).161 Remarkable improvements of both enantioselectivity (up to 94% ee) and chemical yield have been achieved by using a new type of Mn(salen) (53) as the catalyst.162... 

The synthesis of the first polymer-supported chiral Mn-salen derivatives was reported independently by Sivaram171 and Minutolo.171-173 Different monomeric Jacobsen-type units, containing two polymerizable vinyl groups, were copolymerized with styrene and divinylbenzene to yield the corresponding cross-linked polymers as a monolithic compact block.174-176 The less mobile system (Figure 19) with no spacer between the aromatic ring and the polymer backbone is less enantioselective. 

Figure 19 Polymer-supported chiral Mn(III)-salen complexes (P = polymer support).

Kureshy developed a polymer-based chiral Mn-salen complex (Figure 21). Copolymerization of styrene, divinylbenzene, and 4-vinylpyridine generated highly cross-linked (50%) porous beads loaded with pyridine ligands at 3.8 mmol g-1. Once the polymer was charged with the metal complex catalyst, enantioselective epoxidation of styrene derivatives was achieved with ee values in the range 16 46%. 79... 

Dimethylchromene has also proven to be a useful substrate for the assessment of various transition metal complexes as epoxidation catalysts. Chiral Mn(III)-salen complexes are efficient <00CC615 00T417> and can be recycled when used in an ionic liquid <00CC837>. The enantioselective aziridination of a chromene has been achieved using a chiral biaryldiamine-derived catalyst (Scheme 22) <00JA7132>. 

Reversal of the conformation of the chiral Mn-salen complex forces the substituents on the ethylenediamine moiety to take the disfavored axial position. This disfavored conformation (Fig. 4-8A) should be stabilized by the co-... 

The axial immobilization of chiral [Mn((S,S)-salen )j (where salen = (Si,Sj-NiN -bis(3,5-diR -salicylidene)-l,2-diRbethane-diamine R = Bu, R -R = -(CH2)4- R = Bu, R = Ph R = Pn, R R = -(CH2)4-) complexes was achieved by reaction of [Mn(salen )Cl] with sulfonic acid- or phenol-substituted crosslinked and insoluble polystyrene resins [45]. The resulting polymer-immobilized [Mn(salen )j complexes were active and enantioselective for the asymmetric epoxidation of... 

A study of electro-assisted biomimetic activation of molecular oxygen by a chiral Mn(salen) complex in [BMIMJPFs showed that a highly reactive oxomanganese(V) intermediate could transfer its oxygen to an alkene (229). 

Scheme 12.10. Enantioselective Epoxidation with a Chiral Mn Catalyst3...

SCHEME 87. Enantioselective olefin epoxidation using chiral Mn/1,4,7-triazacyclononane... 

Chiral Mn-salen complex 173a in the presence of A-methylimidazole, which serves as axial ligand and H2O2 as oxygen source, has been employed by Pietikainen for the... 

The effect of structural variation and the use of different caboxylate salts as cocatalysts was investigated by Pietikainen . The epoxidation reactions were performed with the chiral Mn(III)-salen complexes 173 depicted in Scheme 93 using H2O2 or urea hydrogen peroxide as oxidants and unfunctionalized alkenes as substrates. With several soluble carboxylate salts as additives, like ammonium acetate, ammonium formate, sodium acetate and sodium benzoate, good yields (62-73%) and moderate enantioselectivities (ee 61-69%) were obtained in the asymmetric epoxidation of 1,2-dihydronaphthalene. The results were better than with Ai-heterocycles like Ai-methylimidazole, ferf-butylpyridine. 

SCHEME 91. Asymmetric epoxidation of 1,2-dihydronaphthalene using chiral Mn-salen complexes 173b and 173c... 

Chiral (salen) Mn(III) complexes have been found to be highly enantioselective for the asymmetric epoxidation of conjugated cis-disubstituted and trisubstituted oleftns[10]. The increasing interest towards this reaction brought some authors to develop the heterogeneous chiral salen catalysts. However, to date three kinds of approach have been adopted for the immobilization of chiral salens (1) Chiral Mn salen complexes were supported on polymers[l 1], (2) The encapsulation of salen complex using ship-in-bottle method was... 

Recently. Frunza et al.[15] have investigated the embedding of enantioselective homogeneous chiral Mn(III) cationic salen complexes into the pore of mesoporous MCM-41 materials. Very few asymmetric catalytic reactions have been examined using chiral salen complexes immobilized on MCM-41. 

H202, cat chiral Mn(IH)-salen, cat W-methyl-imidazole (enantioselective)... 

---