Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chemoselectivity hydrogenation

Active heterogeneous catalysts have been obtained. Examples include titania-, vanadia-, silica-, and ceria-based catalysts. A survey of catalytic materials prepared in flames can be found in [20]. Recent advances include nanocrystalline Ti02 [24], one-step synthesis of noble metal Ti02 [25], Ru-doped cobalt-zirconia [26], vanadia-titania [27], Rh-Al203 for chemoselective hydrogenations [28], and alumina-supported noble metal particles via high-throughput experimentation [29]. [Pg.122]

The condensation of methanol with isobutene and the highly chemoselective hydrogenation of dienes and alkynes are independently promoted by the active acidic sites (-SO3H) and by the active metal. [Pg.208]

The. selective hydrogenation of a nitro group in the presence of other reactive functionalities is a frequently encountered problem in fine chemicals manufacture. Ciba-Geigy (Novartis). scientists developed, in collaboration with a catalyst manufacturer, a new Pt/Pb on CaCO. catalyst that allows the chemoselective hydrogenation of an aromatic nitro group in the presence of C=C, C=0, C=N as well as Cl or Br substituents in selectivities > 95% (even C C groups react very slowly) (Bader et al., 1996). Eqn. (3) shows an example (Bader eJ a/., 1996). [Pg.31]

In this chapter we describe a novel, safe and efficient large-scale synthetic approach to tricycle thienobenzazepines. The key steps in the synthesis include a chemoselective hydrogenation of an aryl-nitro functionality in the presence of a 3-bromo thiophene and a subsequent palladium-catalyzed intramolecular aminocarbonylation telescoped sequentially after simple catalyst and solvent exchange. [Pg.62]

Geraniol can be converted into citronellol and menthol over Cu/A1203 under catalytic hydrogenation conditions owing to chemoselective hydrogenation and a three-functional process taking place on the catalyst surface. [Pg.379]

This is a quite remarkable result, as the chemoselective hydrogenation of geraniol over a heterogeneous catalyst has rarely been reported. It can be carried out over platinum containing zeolite (9), over Pt/Al203 modified with carboxylic acids (10), over Ni/diatomaceous earth and alkali hydroxides or carbonates (11) or NiRaney and alkali or alkaline earth metal hydroxides (12), yields never exceeding 85%. [Pg.383]

The synthesis of 2,3,5-trialkylpyrroles can be easily achieved by conjugate addition of nitroalkanes to 2-alken-l,4-dione (prepared by oxidative cleavage of 2,5-dialkylfuran) with DBU in acetonitrile, followed by chemoselective hydrogenation (10% Pd/C as catalyst) of the C-C- double bond of the enones obtained by elimination of HN02 from the Michael adduct. The Paal-Knorr reaction (Chapter 10) gives 2,3,5-trialkylpyrroles (Eq. 4.124).171... [Pg.112]

Alternatively, Ballini devised a new strategy to synthesize tri-alkylated pyrroles from 2,5-dialkylfurans and nitroalkanes <00SL391>. This method involves initial oxidation of 2,5-dimethylfuran with magnesium monoperoxyphthalate to cA-3-hexen-2,5-dione (6). Conjugate addition of the nitronate anion derived from the nitro compound 7 to 6 followed by chemoselective hydrogenation of the C-C double bond of the resulting enones 8 (obtained by elimination of nitrous acid from the Michael adduct) completes the conversion to the alkylated y-diketones 9. Final cyclization to pyrroles 10 featured improved Paal-Knorr reaction conditions involving reaction of the diketones with primary amines in a bed of basic alumina in the absence of solvent. [Pg.112]

Scheme 3. Chemoselective hydrogenation of imine 8 in a hydrogenation reactor... Scheme 3. Chemoselective hydrogenation of imine 8 in a hydrogenation reactor...
In summary, the research effort aimed towards active, chemoselective hydrogenations of certain C=0 and C=N bonds have delivered several catalysts that approach the level of activity required for use in the synthesis of alcohols and amines. However, other classes of substrate require considerable additional investigations to be conducted before homogeneous catalysts may be considered for this purpose. [Pg.451]

Chemoselective Hydrogenation of Nitro Compounds to the Corresponding Amines on... [Pg.281]

Ir/tppts catalysts exhibit almost the same selectivity as Ru/tppts in the hydrogenation of a,p-unsaturated aldehydes albeit with approximately 70 times lower rates.485 In sharp contrast to the ruthenium and iridium based tppts catalysts, RhJ tppts complexes catalyse the chemoselective hydrogenation of a,fl-unsaturated aldehydes to the corresponding saturated aldehydes (Figure 14, III).54-485... [Pg.161]

CHEMOSELECTIVE HYDROGENATION OF AROMATIC CHLORONITRO COMPOUNDS WITH AMIDINE MODIFIED NICKEL CATALYSTS. [Pg.321]

Amidine derivatives are effective dehalogenation inhibitors for the chemoselective hydrogenation of aromatic halonitro compounds with Raney nickel catalysts. The best modifiers are unsubstituted or N-alkyl substituted formamidine acetates and dicyandiamide which are able to prevent dehalogenation even of very sensitive substrates. Our results indicate that the dehalogenation occurs after the nitro group has been completely reduced i.e. as a consecutive reaction from the halogenated aniline. A possible explanation for these observations is the competitive adsorption between haloaniline, nitro compound, reaction intermediates and/or modifier. The measurement of the catalyst potential can be used to determine the endpoint of the desired nitro reduction very accurately. [Pg.328]

Dihydrogeranylacetone, though not a completely simple olefin, is chemoselectively hydrogenated at the C=C bond in the presence of a Ru complex with MeO-BIPHEP analogue containing four P-2-fury 1 groups to afford the saturated ketone with 91 % ee (Scheme 1.31) [86]. Examples of hydrogenation of a trisubstituted olefin with an oxo or oxy substituent in the p-position are unknown. [Pg.33]

Catalytic asymmetric hydrogenation of 4-aryl coumarins provides a key step in the synthesis of a class of endothelin receptor antagonists <1999TL3293>. Raney Nickel can be used to achieve the chemoselective hydrogenation of coumarins to dihydrocoumarins in excellent yield <1999SL1663>. [Pg.648]

Therefore, in polyenes that contain differently substituted C=C double bonds, it is often possible to chemoselectively hydrogenate the least hindered C=C double bond ... [Pg.127]

Table 9.4 Chemoselective hydrogenation of unsaturated ketones to secondary alcohols. Table 9.4 Chemoselective hydrogenation of unsaturated ketones to secondary alcohols.
Rh and Ir complexes stabilized by tertiary (chiral) phosphorus ligands are the most active and the most versatile catalysts. Although standard hydrogenations of olefins, ketones and reductive aminations are best performed using heterogeneous catalysts (see above), homogeneous catalysis becomes the method of choice once selectivity is called for. An example is the chemoselective hydrogenation of a,/ -unsaturated aldehydes which is a severe test for the selectivity of catalysts. [Pg.105]


See other pages where Chemoselectivity hydrogenation is mentioned: [Pg.261]    [Pg.442]    [Pg.112]    [Pg.62]    [Pg.78]    [Pg.224]    [Pg.1279]    [Pg.1286]    [Pg.1365]    [Pg.12]    [Pg.56]    [Pg.66]    [Pg.100]    [Pg.64]    [Pg.282]    [Pg.284]    [Pg.286]    [Pg.288]    [Pg.537]    [Pg.321]    [Pg.374]    [Pg.331]    [Pg.256]    [Pg.589]    [Pg.15]    [Pg.16]    [Pg.96]    [Pg.105]   
See also in sourсe #XX -- [ Pg.160 ]




SEARCH



Aromatic chemoselective hydrogenation

Chemoselective

Chemoselective hydrogenation

Chemoselective hydrogenation

Chemoselective hydrogenation catalyst

Chemoselective reactions hydrogenation

Chemoselectivity

Chemoselectivity ketone hydrogenation

Hydrogen bonding effects chemoselectivity

Hydrogenation chemoselectively

Unsaturated esters, hydrogenation chemoselective

Unsaturated ketones, hydrogenation chemoselective

© 2024 chempedia.info