Chemiluminescent compounds applications

Many recent applications of chemiluminescence enjoy the protection of patents and some of these applications have been commercialized, e.g., novel chemiluminescent compounds, detectors, and complete assay systems. It is not, however, the purpose of this article to focus on such commercialization and, in keeping with this precept, no patent citations will appear in the reference list. Because of space limitations, certain topics such as bioluminescence, electrochemiluminescence [recently reviewed by Greenway (G12)], and cellular chemiluminescence [see Stanley and Kricka (S41) for an update] will not be covered in this article. Even with the above omissions, it is difficult to provide a comprehensive review of all aspects of chemiluminescence, and one has to exercise a degree of selectivity. The focus will be on what is important in the field of clinical analysis, and an attempt will be made to cover the representative literature. 

The appearance of the first review in 1965 [1] and the first monograph in 1968 [2] on chemiluminescence demonstrated the extent of the phenomenon of light emission from the reaction of organic compounds in solution. Since then the number of chemiluminescent compounds has greatly increased, although the advances in theory and, more recently, applications are probably more significant. 

The scientific interests of Anatoly K. Babko ranged widely, especially in regard to fundamental aspects of analytical chemistry, applications of organic reagents in inorganic analysis, chemistry of complex compounds (including heteropolyacids), analytical applications of complex compounds in photometry, luminescence and chemiluminescence, ion chromatography, and liquid-liquid extraction. 

Electrogenerated chemiluminescence (ECL) has proved to be useful for analytical applications including organic analysis, ECL-based immunosensors, DNA probe assays, and enzymatic biosensors. In the last few years, the electrochemistry and ECL of compound semiconductor nanocrystallites have attracted much attention due to their potential applications in analytical chemistry (ECL sensors). 

Supercritical fluid chromatography (SEC) was first reported in 1962, and applications of the technique rapidly increased following the introduction of commercially available instrumentation in the early 1980s due to the ability to determine thermally labile compounds using detection systems more commonly employed with GC. However, few applications of SEC have been published with regard to the determination of triazines. Recently, a chemiluminescence nitrogen detector was used with packed-column SEC and a methanol-modified CO2 mobile phase for the determination of atrazine, simazine, and propazine. Pressure and mobile phase gradients were used to demonstrate the efficacy of fhe fechnique. 

Chain processes, free radical, in aliphatic systems involving an electron transfer reaction, 23,271 Charge density-NMR chemical shift correlation in organic ions, 11,125 Chemically induced dynamic nuclear spin polarization and its applications, 10, 53 Chemiluminescence of organic compounds, 18,187... 

Typically, intense chemiluminescence in the UV/Vis spectral region requires highly exothermic reactions such as atomic or radical recombinations (e.g., S + S + M - S2 + M) or reactions of reduced species such as hydrogen atoms, olefins, and certain sulfur and phosphorus compounds with strong oxidants such as ozone, fluorine, and chlorine dioxide. Here we review the chemistry and applications of some of the most intense chemiluminescent reactions having either demonstrated or anticipated analytical utility. 

The NO + 03 chemiluminescent reaction [Reactions (1-3)] is utilized in two commercially available GC detectors, the TEA detector, manufactured by Thermal Electric Corporation (Saddle Brook, NJ), and two nitrogen-selective detectors, manufactured by Thermal Electric Corporation and Antek Instruments, respectively. The TEA detector provides a highly sensitive and selective means of analyzing samples for A-nitrosamines, many of which are known carcinogens. These compounds can be found in such diverse matrices as foods, cosmetics, tobacco products, and environmental samples of soil and water. The TEA detector can also be used to quantify nitroaromatics. This class of compounds includes many explosives and various reactive intermediates used in the chemical industry [121]. Several nitroaromatics are known carcinogens, and are found as environmental contaminants. They have been repeatedly identified in organic aerosol particles, formed from the reaction of polycyclic aromatic hydrocarbons with atmospheric nitric acid at the particle surface [122-124], The TEA detector is extremely selective, which aids analyses in complex matrices, but also severely limits the number of potential applications for the detector [125-127],... 

---