Chemicals water-soluble

Yaws, C.L., Yang, H.-C., Hopper, J.R., Hansen, K.C. (1990) Organic chemicals water solubility data. Chem. Eng. July, 115-116. 

The physical properties of these compounds are somewhat different from prolan, DDT, methoxychlor, perthane, and other related chemicals. Water solubility and polarity are considerably... 

Yaws, C. L., H.-C. Yang, Jack R. Hopper and Keith C. Hansen, "Organic Chemicals Water Solubility Data", Chem. Eng., 22,115 (July, 1990). 

OECD (1981c) Guide-line for Testing of Chemicals Water Solubility, OECD, Paris. 

Methylcellulose (MC) R = H, CH3 (Melhocel A , Dow Chemicals) Water soluble (DS = 1.6-2.4) Gelation temperature = 48 °C, Tg= 1.50-160 °C Film melting point 290-.305 °C Viscosity range 10-15,000 MPa for 2% aqueous solution Tablet coating and granulation Controlled release Water soluble thermoplastics Thickeners... 

A variety of substances, such as waste water or chemicals (water soluble/hardly soluble), may be used for the various degradability tests. Toxicity tests are subdivided in aquatic and terrestrial studies. 

Polyoxyethylene. Synthetic polymers with a variety of compositionaHy similar chemical stmctures are as follows. Based on polarity, poly(oxymethylene) (1) would be expected to be water soluble. It is a highly crystalline polymer used in engineering plastics, but it is not water-soluble (see... 

J. E. Glass, ed., Water-Soluble Polymers Beauty with Performance, Advances in Chemistry Series 213, American Chemical Society, Washington, D.C., 1986. 

Eyrol 51 is a water-soluble Hquid containing about 21% phosphoms. It is made by a multistep process from dimethyl methylphosphonate, phosphoms pentoxide, and ethylene oxide. The end groups are principally primary hydroxyl and the compound can thus be incorporated chemically into aminoplasts, phenoHc resins, and polyurethanes. Eyrol 51, or 58 if diluted with a small amount of isopropanol, is used along with amino resins to produce a flame-retardant resin finish on paper used for automotive air filters, or for backcoating of upholstery fabric to pass the British or California flammabiHty standards. 

Hitec Heat-Transfer Salt. Hitec heat-transfer salt, manufactured by Coastal Chemical Co., is an eutectic mixture of water-soluble inorganic salts potassium nitrate (53%), sodium nitrite (40%), and sodium nitrate (7%). It is suitable for Hquid-phase heat transfer at temperatures of 150—540°C. 

Volatilization. The susceptibility of a herbicide to loss through volatilization has received much attention, due in part to the realization that herbicides in the vapor phase may be transported large distances from the point of application. Volatilization losses can be as high as 80—90% of the total applied herbicide within several days of application. The processes that control the amount of herbicide volatilized are the evaporation of the herbicide from the solution or soHd phase into the air, and dispersal and dilution of the resulting vapor into the atmosphere (250). These processes are influenced by many factors including herbicide application rate, wind velocity, temperature, soil moisture content, and the compound s sorption to soil organic and mineral surfaces. Properties of the herbicide that influence volatility include vapor pressure, water solubility, and chemical stmcture (251). 

Miscellaneous Applications. PEIs and their derivatives ate used as cementation auxihaties in cmde oil exploration (459), and for breaking cmde oil emulsions (460) in cmde oil extraction. Seed coatings of water-soluble copolymers containing polyethyleneimine have been developed (461). Polyethyleneimine derivatives have positive photoresist properties (462) amidated polyethyleneimines improve the flow properties of cement (463) and with few exceptions, A/-acyla2iddines act as chemical sterilisers for insects (464). 

Approximately 90% of the phthalocyanines (predominantly copper phthalocyanine) are used as pigments (qv). In addition, they have found acceptance in many types of dyestuffs, eg, direct and reactive dyes, water-soluble and solvent-soluble dyes with physical and chemical binding, a2o-reactive dyes, a2o nonreactive dyes, sulfur dyes, and vat dyes (1) (see Dyes Dyes, reactive). 

Phthalocyanine Dyes. In addition to their use as pigments, the phthalocyanines have found widespread appHcation as dyestuffs, eg, direct and reactive dyes, water-soluble dyes with physical or chemical binding, solvent-soluble dyes with physical or chemical binding, a2o reactive dyes, a2o nonreactive dyes, sulfur dyes, and wet dyes. The first phthalocyanine dyes were used in the early 1930s to dye textiles like cotton (qv). The water-soluble forms Hke sodium salts of copper phthalocyanine disulfonic acid. Direct Blue 86 [1330-38-7] (Cl 74180), Direct Blue 87 [1330-39-8] (Cl 74200), Acid Blue 249 [36485-85-5] (Cl 74220), and their derivatives are used to dye natural and synthetic textiles (qv), paper, and leather (qv). The sodium salt of cobalt phthalocyanine, ie. Vat Blue 29 [1328-50-3] (Cl 74140) is mostly appHed to ceUulose fibers (qv). 

---