Chemicals minimisation

Fluorine cannot be prepared directly by chemical methods. It is prepared in the laboratory and on an industrial scale by electrolysis. Two methods are employed (a) using fused potassium hydrogen-fluoride, KHFj, ill a cell heated electrically to 520-570 K or (b) using fused electrolyte, of composition KF HF = 1 2, in a cell at 340-370 K which can be electrically or steam heated. Moissan, who first isolated fluorine in 1886, used a method very similar to (b) and it is this process which is commonly used in the laboratory and on an industrial scale today. There have been many cell designs but the cell is usually made from steel, or a copper-nickel alloy ( Monel metal). Steel or copper cathodes and specially made amorphous carbon anodes (to minimise attack by fluorine) are used. Hydrogen is formed at the cathode and fluorine at the anode, and the hydrogen fluoride content of the fused electrolyte is maintained by passing in... 

Thermal Evaporation. Thermal evaporatioa is doae ia a high vacuum to minimise chemical side reactioas of the evaporated active metal. 

Plant Fireproofing. There is a growing practice in the chemical industry of locating principal equipment out of doors and to enclose only a control room where all instmments and control equipment are centered. The control room should be resistant to potential explosion, fire, and toxicity ha2ards of processes in the vicinity. Prompt and ordedy shutdown of processes following a serious incident is essential in order to minimise personnel-injury and property-loss ha2ards (65,66). 

Wood is an important natural resource, one of the few that are renewable. It is prevalent ia our everyday Hves and the economy ia wood-frame houses and furniture newspapers, books, and maga2iaes bridges and railroad ties fence posts and utiUty poles fuelwood textile fabrics and organic chemicals. Wood and wood products are also a store for carbon, thus, helping to minimise carbon dioxide ia the atmosphere. 

The industrial catalysts for ammonia synthesis consist of far more than the catalyticaHy active iron (74). There are textural promoters, alumina and calcium oxide, that minimise sintering of the iron and a chemical promoter, potassium (about 1 wt % of the catalyst), and possibly present as K2O the potassium is beheved to be present on the iron surface and to donate electrons to the iron, increasing its activity for the dissociative adsorption of N2. The primary iron particles are about 30 nm in size, and the surface area is about 15 m /g. These catalysts last for years. 

All persons who have occasion to use or handle methylene chloride should be thoroughly instructed and adequately supervised in the proper methods of handling the substance to prevent or minimise exposure to the Hquid or its vapors and in the proper methods of disposing of this chemical. 

Converting Heat to Work. There has been a historic bias in the chemical industry to think of energy use in terms of fuel and steam (qv) systems. A more fundamental approach is to minimise the input of work potential embedded in the fuel and feedstock, as well as work purchased direcdy as electricity. Steam is really just a medium of exchange, like money in an economy. 

There is a large range of resins available for SPOS. These resins are derivatised polymer supports with a range of linkers. The roles of linkers are (i) to provide point(s) of attachment for the tethered molecule, akin to a solid supported protecting group(s), (ii) to provide distance from the polymeric backbone in order to minimise interactions with the backbone, (iii) to enable cleavage of product molecules under conditions compatible with the stability of the molecules and the reaction conditions employed for chemical transformations. Hence in order to... 

The most common method of purification of inorganic species is by recrystallisation, usually from water. However, especially with salts of weak acids or of cations other than the alkaline and alkaline earth metals, care must be taken to minimise the effect of hydrolysis. This can be achieved, for example, by recrystallising acetates in the presence of dilute acetic acid. Nevertheless, there are many inorganic chemicals that are too insoluble or are hydrolysed by water so that no general purification method can be given. It is convenient that many inorganic substances have large temperature coefficients for their solubility in water, but in other cases recrystallisation is still possible by partial solvent evaporation. 

---