Chemical steps

Taste-active chemicals react with receptors on the surface of sensory cells in the papillae causing electrical depolarization, ie, drop in the voltage across the sensory cell membrane. The collection of biochemical events that are involved in this process is called transduction (15,16). Not all the chemical steps involved in transduction are known however, it is clear that different transduction mechanisms are involved in different taste quaUties different transduction mechanisms exist for the same chemical in different species (15). Thus the specificity of chemosensory processes, ie, taste and smell, to different chemicals is caused by differences in the sensory cell membrane, the transduction mechanisms, and the central nervous system (14). 

Dkect synthesis is the preparative method that ultimately accounts for most of the commercial siUcon hydride production. This is the synthesis of halosilanes by the dkect reaction of a halogen or haUde with siUcon metal, siUcon dioxide, siUcon carbide, or metal sihcide without an intervening chemical step or reagent. Trichlorosilane is produced by the reaction of hydrogen chloride and siUcon, ferrosiUcon, or calcium sihcide with or without a copper catalyst (82,83). Standard purity is produced in a static bed at 400—900°C. 

In another process, diosgenin is degraded to 16-dehydropregnenolone by chemical methods. Conversion of 16-dehydropregnenolone to 11-deoxycortisol (125) can be accompHshed in 11 chemical steps. These steps result in hydroxylations at C21 and C17, oxidation at C3, and to double-bond isomeri2ation (175). Microbial oxidation of (125) also produces cortisol (29). 

Estranes. Investigations into the total synthesis of steroids began in the 1930s shordy after the precise formula for cholesterol was estabUshed. The eadiest studies focused on equilenin (5) because of its relative stereochemical simplicity when compared to other steroid nuclei Initially, equilenin was synthesi2ed in 20 chemical steps with an overall yield of 2.7%. This synthesis helped to confirm the perhydro-l,2-cyclopentenophenanthrene ring system of... 

The most recent, and probably most elegant, process for the asymmetric synthesis of (+)-estrone appHes a tandem Claisen rearrangement and intramolecular ene-reaction (Eig. 23). StereochemicaHy pure (185) is synthesized from (2R)-l,2-0-isopropyhdene-3-butanone in an overall yield of 86% in four chemical steps. Heating a toluene solution of (185), enol ether (187), and 2,6-dimethylphenol to 180°C in a sealed tube for 60 h produces (190) in 76% yield after purification. Ozonolysis of (190) followed by base-catalyzed epimerization of the C8a-hydrogen to a C8P-hydrogen (again similar to conversion of (175) to (176)) produces (184) in 46% yield from (190). Aldehyde (184) was converted to 9,11-dehydroestrone methyl ether (177) as discussed above. The overall yield of 9,11-dehydroestrone methyl ether (177) was 17% in five steps from 6-methoxy-l-tetralone (186) and (185) (201). 

A similar intramolecular Diels-Alder strategy was employed in an efficient synthesis to an appropriately functionalized hydrindanone nucleus (212). After functionalization, Diels-Alder cyclization, and appropriate functional group manipulation, this hydrindanone was converted into ( )-cortisone. The overall process afforded ( )-cortisone in a total of 18 chemical steps in approximately 3% yield. 

Other, removable cation-stabilizing auxiliaries have been investigated for polyene cyclizations. For example, a sdyl-assisted carbocation cyclization has been used in an efficient total synthesis of lanosterol. The key step, treatment of (257) with methyl aluminum chloride in methylene chloride at —78° C, followed by acylation and chromatographic separation, affords (258) in 55% yield (two steps). When this cyclization was attempted on similar compounds that did not contain the C7P-silicon substituent, no tetracycHc products were observed. Steroid (258) is converted to lanosterol (77) in three additional chemical steps (225). 

Similar chemical steps occur in the ambient air and in laboratory smog chamber simulations. Initially, hydrocarbons and nitric oxide are oxidized... 

The important hydrocarbon classes are alkanes, alkenes, aromatics, and oxygenates. The first three classes are generally released to the atmosphere, whereas the fourth class, the oxygenates, is generally formed in the atmosphere. Propene will be used to illustrate the types of reactions that take place with alkenes. Propene reactions are initiated by a chemical reaction of OH or O3 with the carbon-carbon double bond. The chemical steps that follow result in the formation of free radicals of several different types which can undergo reaction with O2, NO, SO2, and NO2 to promote the formation of photochemical smog products. 

Free radical chain growth polymerization takes place through three distinct chemical steps. These are shown in Fig. 1. 

When topological strategies are used concurrently with other types of strategic guidance several benefits may result including (1) reduction of the time required to find excellent solutions (2) discovery of especially short or convergent synthetic routes (3) effective control of stereochemistry (4) orientational (regiochemical) selectivity (5) minimization of reactivity problems and (6) facilitation of crucial chemical steps. 

Many of the crown ether syntheses with which we are concerned in this book are one form or another of the Williamson ether synthesis. Although the simplest example of such a reaction would involve an co-haloethylene glycol oligomer which undergoes intramolecular cyclization, it is more common for two new bonds to be formed in crown syntheses. An early example of the formation of a crown by a double-Williamson can be found in Dale s synthesis of 18-crown-6. The rather obvious chemical steps are shown in Eq. (2.1). 

In the chemical desorption step the adsorbed H atoms diffuse about on the metal surface, either by threading their way through adsorbed water molecules or by pushing them aside, until two collide to form an Hj molecule which escapes into the solution. This chemical step will be independent of overpotential, since charge transfer is not involved, and the rate will be proportional to the concentration or coverage of adsorbed H,, (see equation 20.39) and may occur at coverages that range from very small to almost complete. 

Closely related to the concept of chirality, and particularly important in biological chemistry, is the notion of prochirality. A molecule is said to be prochiral if can be converted from achiral to chiral in a single chemical step. For instance, an unsymmetrical ketone like 2-butanone is prochiral because it can be converted to the chiral alcohol 2-butanol by addition of hydrogen, as we ll see in Section 17.4. 

A molecule is prochiral if can be converted from achiral to chiral in a single chemical step. A prochiral sp2-hybridized atom has two faces, described as either Re or Si. An sp3-hybridized atom is a prochirality center if, by changing one of its attached atoms, a chirality center results. The atom whose replacement leads to an R chirality center is pro-R, and the atom whose replacement leads to an S chirality center is pro-S. 

Prochiral (Section 9.13) A molecule that can be converted from achiral to chiral in a single chemical step. 

However, the products are separated using ion-exchange columns and the starting material is a derivative rattier than a precursor of the racemic amino add, thus making the total process drcuitous since it involves several chemical steps in addition to die enzymatic resolution step. Furthermore, racemisation of the unwanted isomer is not easily accomplished. 

The quantitative solution of the problem, i.e. simultaneous determination of both the sequence of surface chemical steps and the ratios of the rate constants of adsorption-desorption processes to the rate constants of surface reactions from experimental kinetic data, is extraordinarily difficult. The attempt made by Smith and Prater 82) in a study of cyclohexane-cyclohexene-benzene interconversion, using elegant mathematic procedures based on the previous theoretical treatment 28), has met with only partial success. Nevertheless, their work is an example of how a sophisticated approach to the quantitative solution of a coupled heterogeneous catalytic system should be employed if the system is studied as a whole. 

The thermal decomposition of a solid, which necessarily (on the above definition) incorporates a chemical step, is sometimes associated with the physical transformations to which passing reference was made above melting, sublimation, and recrystallization. Aspects of the relationships between physical transitions and decomposition reactions of solids are discussed in a book by Budnikov and Ginstling [1]. Since, in general, phase changes exert significant influence upon concurrent or subsequent chemical processes, it is appropriate to preface the main survey of the latter phenomena with a brief account of those features of melting, sublimation, and recrystallization which are relevant to the consideration of thermal decomposition reactions. 

Tenet (v). Experimental studies of the interaction of a solid with a gas, liquid or solute must ensure that there is uniform availability of the homogeneous participant at all surfaces within an assemblage of reactant crystallites if meaningful kinetic measurements relating to the chemical step are to be obtained. If this is not achieved, then diffusion rates will control the overall rate of product formation. Such effects may be particularly significant in studies concerned with finely divided solids. 

Single-step nucleation, (ii) above, requires the unsatisfactory assumption that the generation of a single molecule (atom, ion-pair, etc.) of product constitutes the establishment of a nucleus. (It would seem to be more realistic to regard this as the outcome of several distinct chemical steps.) The mathematical treatment expressing the probability of the occurrence of this unimolecular process is... 

The kinetic principles operating during the initiation and advance of interface-controlled reactions are identical with the behaviour discussed for the decomposition of a single solid (Chaps. 3 and 4). The condition that overall rate control is determined by an interface process is that a chemical step within this zone is slow compared with the rate of arrival of the second reactant. This condition is not usually satisfied during reaction between solids where the product is formed at the contact of a barrier layer with a reactant. Particular systems that satisfy the specialized requirements can, however, be envisaged for example, rate processes in which all products are volatilized or a solid additive catalyzes the decomposition of a solid yielding no solid residue. Even here, however, the kinetic characteristics are likely to be influenced by changing effectiveness of contact as reaction proceeds, or the deactivation of the catalyst surface. 

Additional information on the rates of these (and other) coupled chemical reactions can be achieved by changing the scan rate (i.e., adjusting the experimental time scale). In particular, the scan rate controls the tune spent between the switching potential and the peak potential (during which the chemical reaction occurs). Hence, as illustrated in Figure 2-6, i is the ratio of the rate constant (of the chemical step) to die scan rate, which controls the peak ratio. Most useful information is obtained when the reaction time lies within the experimental tune scale. For scan rates between 0.02 and 200 V s-1 (common with conventional electrodes), the accessible... 

A special case of the EC mechanism is the catalytic regeneration of O during the chemical step ... 

ECE processes, with a chemical step being interposed between electron transfer steps,... 

Many anodic oxidations involve an ECE pathway. For example, the neurotransmitter epinephrine can be oxidized to its quinone, which proceeds via cyclization to leukoadrenochrome. The latter can rapidly undergo electron transfer to form adrenochrome (5). The electrochemical oxidation of aniline is another classical example of an ECE pathway (6). The cation radical thus formed rapidly undergoes a dimerization reaction to yield an easily oxidized p-aminodiphenylamine product. Another example (of industrial relevance) is the reductive coupling of activated olefins to yield a radical anion, which reacts with the parent olefin to give a reducible dimer (7). If the chemical step is very fast (in comparison to the electron-transfer process), the system will behave as an EE mechanism (of two successive charge-transfer steps). Table 2-1 summarizes common electrochemical mechanisms involving coupled chemical reactions. Powerful cyclic voltammetric computational simulators, exploring the behavior of virtually any user-specific mechanism, have... 

---