Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Chemical reaction catalyst

Although very corrosive, it can be stored and shipped in steel or common alloys at commercial concentrations. In some chemical processes, it is used simply as an acid while in others it is used as a dehydrating agent to remove water, as an agent to increase the rate of a chemical reaction (catalyst), or as a solvent for reactions in which it remains unchanged. It rarely ends up in the final product. Waste sulfuric acid can be recycled. [Pg.18]

Life is sustained by a complex web of chemical reactions. Catalysts, molecules that accelerate the rate of a chemical reaction but that are unchanged by the overall reaction, are essential for life as most reactions would otherwise occur far too slowly. Indeed, it can be argued that the evolution of life is essentially the story of the evolution of catalysis. In nature, most catalysts are proteins and these catalytic proteins, or enzymes, are one of the most remarkable classes of molecules to have been generated during evolution. Enzymes catalyze an enormous range of different reactions and their performances typically far exceed those of man-made catalysts. They can accelerate reactions by anything up to 10 -fold relative to the uncatalyzed reaction, enabling reactions that would otherwise have half-lives of tens of millions of years to be performed in milliseconds. [Pg.211]

Is it possible to speed up a chemical reaction Yes, you can add a catalyst (KAT uh lihst). A catalyst is a substance that speeds up a chemical reaction. Catalysts do not appear in chemical equations, because they are not changed permanently or used up. A reaction using a catalyst will not produce more product than a reaction without a catalyst, but it will produce the same amount of product faster. [Pg.51]

In one sense, non-reactive systems are simpler, since they do not incorporate chemical reactions, catalysts, and the associated complexities of such systems. However, some non-reactive systems can be even more complex, depending on... [Pg.131]

Traveling over a mountain pass is an analogy frequently used to describe the progress of a chemical reaction. Catalysts speed up the process. [Pg.143]

The observed stoichiometric relation is characterized by specifying reactants and products, including catalysts, and the number of conservation conditions the integers Q, 71, v epitomize these properties. There are also integer parameters associated with a proposed reaction mechanism 7 namely, x, the number of chemical components, i, the number of intermediate species, and n, the number of independent chemical reactions. Catalysts are to be counted among the x components, so no special symbol is required for them. [Pg.258]

A catalyst is a substance that increases the rate of a chemical reaction. Catalysts speed up the time taken to reach equilibrium, but they have no elfect on the position of equilibrium once this is reached. This is because they increase the rate of the forward and reverse reactions equally. [Pg.133]

A similar effect studied in [16, 17] reveals the dependence of a combustible mixture composition on the duration that the mixture is held in a heated vessel before ignition. The heated vessel walls, often made of stainless steel, act as a chemical reaction catalyst reducing the amount of H2 or O2 in the mixture. [Pg.79]

For example, the expansion of a gas requires the release of a pm holding a piston in place or the opening of a stopcock, while a chemical reaction can be initiated by mixing the reactants or by adding a catalyst. One often finds statements that at equilibrium in an isolated system (constant U, V, n), the entropy is maximized . Wliat does this mean ... [Pg.337]

This example illustrates a subtle control of a chemical reaction by a delicate manipulation of tire stereochemical environment around a metal centre dictated by tire selection of tire ligands. This example hints at tire subtlety of nature s catalysts, tire enzymes, which are also typically stereochemically selective. Chiral catalysis is important in biology and in tire manufacture of chemicals to regulate biological functions, i.e., phannaceuticals. [Pg.2704]

Pollution control such as the reduction of nitrogen oxides, halocarbons and hydrocarbons from flue gases [37] is another important field of plasma-assisted chemistry using non-thennal plasmas. The efficiency of plasma chemical reactions can be enhanced by introducing catalysts into the plasma [38, 39]. [Pg.2809]

It is true that the structure, energy, and many properties ofa molecule can be described by the Schrodingcr equation. However, this equation quite often cannot be solved in a straightforward manner, or its solution would require large amounts of computation time that are at present beyond reach, This is even more true for chemical reactions. Only the simplest reactions can be calculated in a rigorous manner, others require a scries of approximations, and most arc still beyond an exact quantum mechanical treatment, particularly as concerns the influence of reaction conditions such as solvent, temperature, or catalyst. [Pg.2]

The representation of a chemical reaction should include the connection table of all participating species starting materials, reagents, solvents, catalysts, products) as well as Information on reaction conditions (temperature, concentration, time, etc.) and observations (yield, reaction rates, heat of reaction, etc.). However, reactions are only Insuffclently represented by the structure of their starting materials and products,... [Pg.199]

The understanding and simulation of chemical reactions is one of the great challenges of chemoinformatics. Each day millions of reactions are performed, sometimes with rather poor results because of our limited understanding of chemical reactivity and the influence of solvents, catalysts, temperature, etc. This problem has to be tackled by both deductive and inductive learning methods. [Pg.624]

In principle, Chen, given the flux relations there is no difficulty in constructing differencial equations to describe the behavior of a catalyst pellet in steady or unsteady states. In practice, however, this simple procedure is obstructed by the implicit nature of the flux relations, since an explicit solution of usefully compact form is obtainable only for binary mixtures- In steady states this impasse is avoided by using certain, relations between Che flux vectors which are associated with the stoichiometry of Che chemical reaction or reactions taking place in the pellet, and the major part of Chapter 11 is concerned with the derivation, application and limitations of these stoichiometric relations. Fortunately they permit practicable solution procedures to be constructed regardless of the number of substances in the reaction mixture, provided there are only one or two stoichiomeCrically independent chemical reactions. [Pg.5]

We have shown that the contribution of the through micropores to diffusion in a porous catalyst may be increased substantially in the presence of a chemical reaction, but it must be emphasized that this is not a consequence of any real modification of the laws of diffusion in the micropores. [Pg.87]

Apart from using an environmentally friendly solvent, it is also important to clean up the chemical reactions themselves by reducing the number and amount of side-products formed. For this purpose catalysts are a versatile tool. Catalysts have been used for thousands of years in processes such as fermentation and their importance has grown ever since. In synthetic oiganic chemistry, catalysts have found wide applications. In the majority of these catalytic processes, organic solvents are used, but also here the use of water is becoming increasingly popular . [Pg.2]

Acids and bases are a big part of organic chemistry but the emphasis is much different from what you may be familiar with from your general chemistry course Most of the atten tion m general chemistry is given to numerical calculations pH percent loniza tion buffer problems and so on Some of this returns m organic chemistry but mostly we are concerned with the roles that acids and bases play as reactants products and catalysts m chemical reactions We 11 start by reviewing some general ideas about acids and bases... [Pg.32]

When propene is polymerized under free radical conditions the polypropylene that results IS atactic Catalysts of the Ziegler-Natta type however permit the preparation of either isotactic or syndiotactic polypropylene We see here an example of how proper choice of experimental conditions can affect the stereochemical course of a chemical reaction to the extent that entirely new materials with unique properties result... [Pg.314]

Several important points about the rate law are shown in equation A5.4. First, the rate of a reaction may depend on the concentrations of both reactants and products, as well as the concentrations of species that do not appear in the reaction s overall stoichiometry. Species E in equation A5.4, for example, may represent a catalyst. Second, the reaction order for a given species is not necessarily the same as its stoichiometry in the chemical reaction. Reaction orders may be positive, negative, or zero and may take integer or noninteger values. Finally, the overall reaction order is the sum of the individual reaction orders. Thus, the overall reaction order for equation A5.4 isa-l-[3-l-y-l-5-l-8. [Pg.751]

M ass Transfer. Mass transfer in a fluidized bed can occur in several ways. Bed-to-surface mass transfer is important in plating appHcations. Transfer from the soHd surface to the gas phase is important in drying, sublimation, and desorption processes. Mass transfer can be the limiting step in a chemical reaction system. In most instances, gas from bubbles, gas voids, or the conveying gas reacts with a soHd reactant or catalyst. In catalytic systems, the surface area of a catalyst can be enormous. Eor Group A particles, surface areas of 5 to over 1000 m /g are possible. [Pg.76]

Boron trifluoride catalyst may be recovered by distillation, chemical reactions, or a combination of these methods. Ammonia or amines are frequently added to the spent catalyst to form stable coordination compounds that can be separated from the reaction products. Subsequent treatment with sulfuric acid releases boron trifluoride. An organic compound may be added that forms an adduct more stable than that formed by the desired product and boron trifluoride. In another procedure, a fluoride is added to the reaction products to precipitate the boron trifluoride which is then released by heating. Selective solvents may also be employed in recovery procedures (see Catalysts,regeneration). [Pg.162]


See other pages where Chemical reaction catalyst is mentioned: [Pg.38]    [Pg.172]    [Pg.31]    [Pg.751]    [Pg.401]    [Pg.138]    [Pg.144]    [Pg.79]    [Pg.38]    [Pg.172]    [Pg.31]    [Pg.751]    [Pg.401]    [Pg.138]    [Pg.144]    [Pg.79]    [Pg.47]    [Pg.85]    [Pg.584]    [Pg.898]    [Pg.2696]    [Pg.434]    [Pg.67]    [Pg.110]    [Pg.111]    [Pg.201]    [Pg.626]    [Pg.5]    [Pg.88]    [Pg.85]    [Pg.444]    [Pg.438]    [Pg.443]    [Pg.512]    [Pg.122]    [Pg.124]   
See also in sourсe #XX -- [ Pg.44 , Pg.54 , Pg.148 , Pg.150 ]




SEARCH



CATALYSTS INCREASE THE RATE OF CHEMICAL REACTIONS

Catalysts chemical

Chemical Reaction and Diffusion inside a Catalyst Particle

Chemical reaction during catalyst

Chemical reaction during catalyst preparation

Chemical reaction in porous catalyst pellets

Chemical reaction kinetics catalyst effects

Heterogeneous chemical reactions catalyst effects

Mass transfer and chemical reaction in a catalyst pellet

Oscillating chemical reaction metal catalyst

Oscillatory chemical reaction catalysts

Porous catalyst, chemical reaction

Porous catalyst, chemical reaction isothermal

© 2024 chempedia.info