Chelation transfer

The benzoic acid derivative 457 is formed by the carbonylation of iodoben-zene in aqueous DMF (1 1) without using a phosphine ligand at room temperature and 1 atm[311]. As optimum conditions for the technical synthesis of the anthranilic acid derivative 458, it has been found that A-acetyl protection, which has a chelating effect, is important[312]. Phase-transfer catalysis is combined with the Pd-catalyzed carbonylation of halides[3l3]. Carbonylation of 1,1-dibromoalkenes in the presence of a phase-transfer catalyst gives the gem-inal dicarboxylic acid 459. Use of a polar solvent is important[314]. Interestingly, addition of trimethylsilyl chloride (2 equiv.) increased yield of the lactone 460 remarkabiy[3l5]. Formate esters as a CO source and NaOR are used for the carbonylation of aryl iodides under a nitrogen atmosphere without using CO[316]. Chlorobenzene coordinated by Cr(CO)j is carbonylated with ethyl formate[3l7]. 

A typical recipe for batch emulsion polymerization is shown in Table 13. A reaction time of 7—8 h at 30°C is requited for 95—98% conversion. A latex is produced with an average particle diameter of 100—150 nm. Other modifying ingredients may be present, eg, other colloidal protective agents such as gelatin or carboxymethylcellulose, initiator activators such as redox types, chelates, plasticizers, stabilizers, and chain-transfer agents. 

Many reactions catalyzed by the addition of simple metal ions involve chelation of the metal. The familiar autocatalysis of the oxidation of oxalate by permanganate results from the chelation of the oxalate and Mn (III) from the permanganate. Oxidation of ascorbic acid [50-81-7] C HgO, is catalyzed by copper (12). The stabilization of preparations containing ascorbic acid by the addition of a chelant appears to be negative catalysis of the oxidation but results from the sequestration of the copper. Many such inhibitions are the result of sequestration. Catalysis by chelation of metal ions with a reactant is usually accomphshed by polarization of the molecule, faciUtation of electron transfer by the metal, or orientation of reactants. 

Chelation itself is sometimes useful in directing the course of synthesis. This is called the template effect (37). The presence of a suitable metal ion facihtates the preparation of the crown ethers, porphyrins, and similar heteroatom macrocycHc compounds. Coordination of the heteroatoms about the metal orients the end groups of the reactants for ring closure. The product is the chelate from which the metal may be removed by a suitable method. In other catalytic effects, reactive centers may be brought into close proximity, charge or bond strain effects may be created, or electron transfers may be made possible. 

The crown ethers and cryptates are able to complex the alkaU metals very strongly (38). AppHcations of these agents depend on the appreciable solubihty of the chelates in a wide range of solvents and the increase in activity of the co-anion in nonaqueous systems. For example, potassium hydroxide or permanganate can be solubiHzed in benzene [71 -43-2] hy dicyclohexano-[18]-crown-6 [16069-36-6]. In nonpolar solvents the anions are neither extensively solvated nor strongly paired with the complexed cation, and they behave as naked or bare anions with enhanced activity. Small amounts of the macrocycHc compounds can serve as phase-transfer agents, and they may be more effective than tetrabutylammonium ion for the purpose. The cost of these macrocycHc agents limits industrial use. 

If a neutral chelate formed from a ligand such as acetylacetone is sufficiently soluble in water not to precipitate, it may stiH be extracted into an immiscible solvent and thus separated from the other constituents of the water phase. Metal recovery processes (see Mineral recovery and processing), such as from dilute leach dump Hquors, and analytical procedures are based on this phase-transfer process, as with precipitation. Solvent extraction theory and many separation systems have been reviewed (42). 

See Antibiotics, polyethers Catalysis, phase-transfer Chelating agents. 

In addition to the above mechanism, the metal chelates can influence the process of quenching through electron-transfer ... 

A number of metal chelates containing transition metals in their higher oxidation states are known to decompose by one electron transfer process to generate free radical species, which may initiate graft copolymerization reactions. Different transition metals, such as Zn, Fe, V, Co, Cr, Al, etc., have been used in the preparation of metal acetyl acetonates and other diketonates. Several studies demonstrated earlier that metal acetyl acetonates can be used as initiators for vinyl polymeriza-... 

Metal chelates afford a better initiating system as compared to other redox systems since the reactions can be carried out at low temperatures, thus avoiding wastage reactions due to chain transfer. Homopolymer formation is also minimum in these systems. It was observed by Misra et al. [66,67] that the maximum percentage of grafting occurs at a temperature much below the decomposition temperature of the various metal chelates indicating that the chelate instead of undergoing spontaneous decomposition receives some assistance either from the solvent or monomer or from both for the facile decomposition at lower temperature. The solvent or monomer assisted decomposition can be described as ... 

By using this technique acrylamide, acrylonitrile, and methyl acrylate were grafted onto cellulose [20]. In this case, oxidative depolymerization of cellulose also occurs and could yield short-lived intermediates [21]. They [21] reported an electron spin resonance spectroscopy study of the affects of different parameters on the rates of formation and decay of free radicals in microcrystalline cellulose and in purified fibrous cotton cellulose. From the results they obtained, they suggested that ceric ions form a chelate with the cellulose molecule, possibly, through the C2 and C3 hydroxyls of the anhy-droglucose unit. Transfer of electrons from the cellulose molecule to Ce(IV) would follow, leading to its reduction... 

Transfer the solution to a 250 mL separatory funnel, rinsing out the beaker with a little water. Add 5 mL of the 2 per cent NaDDC reagent and allow to stand for one minute, and then add a lOmL portion of 4-methylpentan-2-one (methyl isobutyl ketone), shake for one minute and then separate and collect the organic layer. Return the aqueous phase to the funnel, extract with a further lOmL portion of methyl isobutyl ketone, separate and combine the organic layer with that already collected. Finally, rinse the funnel with a little fresh ketone and add this rinse liquid to the organic extract. In these operations the lead is converted into a chelate which is extracted into the organic solvent. 

However, the free hydroxyaldehyde and tetra-2-propenylzirconium lead predominantly, in an intramolecular allyl transfer, to the product of formal chelation control87. 

Ceric ions react rapidly with 1,2-diols. There is evidence for chelation of cerium and these complexes are likely intermediates in radical generation10 106 The overall chemistry may be understood in terms of an intermediate alkoxy radical which undergoes p-scission to give a carbonyl compound and a hydroxyalkyl radical (Scheme 3.59). However, it is also possible that there is concerted electron transfer and bond-cleavage. There is little direct data on the chemical nature of the radical in termediates. 

---