Chains, carbon atoms hydrocarbon

Collectors ndFrothers. Collectors play a critical role ia flotation (41). These are heteropolar organic molecules characterized by a polar functional group that has a high affinity for the desired mineral, and a hydrocarbon group, usually a simple 2—18 carbon atom hydrocarbon chain, that imparts hydrophobicity to the minerals surface after the molecule has adsorbed. Most collectors are weak acids or bases or their salts, and are either ionic or neutral. The mode of iateraction between the functional group and the mineral surface may iavolve a chemical reaction, for example, chemisorption, or a physical iateraction such as electrostatic attraction. 

As previously described, friction modifiers are usually long slender molecules with a straight hydrocarbon chain of at least ten carbon atoms. Hydrocarbons derived from natural products are ideal for such applications. The polar head group is the dominant factor in the effectiveness of the molecule as a friction modifier, such polar groups consist of ... 

Phospholipids can have different hydrocarbon tails (Table 10.3). Due to the way lipids are metabolized, they usually contain an even number of carbon atoms. Hydrocarbon tails differ in length and in the number of double bonds they contain. Lipids with hydrocarbon chains containing one or more double bonds are called unsaturated. They strongly influence the fluidity of a bilayer. Longer hydrocarbon chains have a higher melting point and reduce the mobility of a membrane. Double... 

One or more hydrogen atoms can be substituted by a carbon atom or chain of hydrocarbons, in which case they are called isoparaffins or isoalkanes. 

While the long chain hydrocarbons (above 18 carbon atoms) may exist in solution at reservoir temperature and pressure, they can solidify at the lower temperatures and pressures experienced in surface facilities, or even in the tubing. The fraction of the longer chain hydrocarbons in the crude oil are therefore of particular interest to process engineers, who will typically require a detailed laboratory analysis of the crude oil oomposition, extending to the measurement of the fraction of molecules as long as C3Q. 

This observation that the length of the hydrocarbon chain could be varied from 16 to 26 carbon atoms without affecting the limiting area could only mean that at this point the molecules were oriented vertically. From the molecular weight and density of palmitic acid, one computes a molecular volume of 495 A a molecule occupying only 21 A on the surface could then be about 4.5 A on the side but must be about 23 A long. In this way one begins to obtain information about the shape and orientation as well as the size of molecules. 

A selection of important anionic surfactants is displayed in table C2.3.1. Carboxylic acid salts or tire soaps are tire best known anionic surfactants. These materials were originally derived from animal fats by saponification. The ionized carboxyl group provides tire anionic charge. Examples witlr hydrocarbon chains of fewer tlran ten carbon atoms are too soluble and tliose witlr chains longer tlran 20 carbon atoms are too insoluble to be useful in aqueous applications. They may be prepared witlr cations otlrer tlran sodium. 

We shonld also utilize liquid hydrocarbons, which frequently accompany natural gas. These so-called natural gas liquids currently have little use besides their caloric heat value. They consist mainly of saturated straight hydrocarbons chains containing 3-6 carbon atoms, as well as some aromatics. As we found (Chapter 8), it is possible by superacidic catalytic treatment to upgrade these liquids to high-octane, commercially usable gasoline. Their use will not per se solve our long-... 

The hydrogenolyaia of cyclopropane rings (C—C bond cleavage) has been described on p, 105. In syntheses of complex molecules reductive cleavage of alcohols, epoxides, and enol ethers of 5-keto esters are the most important examples, and some selectivity rules will be given. Primary alcohols are converted into tosylates much faster than secondary alcohols. The tosylate group is substituted by hydrogen upon treatment with LiAlH (W. Zorbach, 1961). Epoxides are also easily opened by LiAlH. The hydride ion attacks the less hindered carbon atom of the epoxide (H.B. Henhest, 1956). The reduction of sterically hindered enol ethers of 9-keto esters with lithium in ammonia leads to the a,/S-unsaturated ester and subsequently to the saturated ester in reasonable yields (R.M. Coates, 1970). Tributyltin hydride reduces halides to hydrocarbons stereoselectively in a free-radical chain reaction (L.W. Menapace, 1964) and reacts only slowly with C 0 and C—C double bonds (W.T. Brady, 1970 H.G. Kuivila, 1968). 

Unsaturated branched acyclic hydrocarbons are named as derivatives of the chain that contains the maximum number of double and/or triple bonds. When a choice exists, priority goes in sequence to (1) the chain with the greatest number of carbon atoms and (2) the chain containing the maximum number of double bonds. 

Monocyclic Aliphatic Hydrocarbons. Monocyclic aliphatic hydrocarbons (with no side chains) are named by prefixing cyclo- to the name of the corresponding open-chain hydrocarbon having the same number of carbon atoms as the ring. Radicals are formed as with the alkanes, alkenes, and alkynes. Examples ... 

Aldehydes. When the group —C(=0)H, usually written —CHO, is attached to carbon at one (or both) end(s) of a linear acyclic chain the name is formed by adding the suffix -al (or -dial) to the name of the hydrocarbon containing the same number of carbon atoms. Examples are butanal for CHjCHjCHjCHO and propanedial for, OHCCH CHO. 

Before we examine the polymerization process itself, it is essential to understand the behavior of the emulsifier molecules. This class of substances is characterized by molecules which possess a polar or ionic group or head and a hydrocarbon chain or tail. The latter is often in the 10-20 carbon atom size range. Dodecyl sulfate ions, from sodium dodecyl sulfate, are typical ionic emulsifiers. These molecules have the following properties which are pertinent to the present discussion ... 

IPP react with each other, releasiag pyrophosphate to form another allyl pyrophosphate containing 10 carbon atoms. The chain can successively build up by five-carbon units to yield polyisoprenes by head-to-tad condensations alternatively, tad-to-tad condensations of two units can yield squalene, a precursor of sterols. Similar condensation of two C2Q units yields phytoene, a precursor of carotenoids. This information is expected to help ia the development of genetic methods to control the hydrocarbon stmctures and yields. 

The alkanes have low reactivities as compared to other hydrocarbons. Much alkane chemistry involves free-radical chain reactions that occur under vigorous conditions, eg, combustion and pyrolysis. Isobutane exhibits a different chemical behavior than / -butane, owing in part to the presence of a tertiary carbon atom and to the stability of the associated free radical. 

Solids present in oil and synthetic muds must be kept wet with the nonaqueous phase to prevent coagulation and settling and mud instabiUty. Oil-wetting agents are normally incorporated in the basic mud package. These materials are typically amines or quaternary ammonium salts having hydrocarbon chains of 10 or more carbon atoms. They also render clays or lignites oil-wet for use in viscosity and filtration control (128). 

Phosphorus—Carbon Bond. The P—C bond is 0.184—0.194-nm long and has an energy of ca 272 kj/mol (65 kcal/mol). It is one of the more stable bonds formed by phosphoms, resistant to both hydrolysis and oxidation (7,8). Unlike the phosphoms—halogen or phosphoms—oxygen bonds, the P—C linkage is inert to exchange. A phosphoms atom connected to carbon behaves similarly to another carbon atom in a hydrocarbon chain. 

The solubihty of alkylphenols in water falls off precipitously as the number of carbons attached to the ring increases. They are generally soluble in common organic solvents acetone, alcohols, hydrocarbons, toluene. Solubihty in alcohols or heptane follows the generalization that "like dissolves like." The more polar the alkylphenol, the greater its solubihty in alcohols, but not in ahphatic hydrocarbons likewise with cresols and xylenols. The solubihty of an alkylphenol in a hydrocarbon solvent increases as the number of carbon atoms in the alkyl chain increases. High purity para substituted phenols, through Cg, can be obtained by crystallization from heptane. 

In recent years, especially in the USSR and Europe, synthetic fatty acids, prepared via hydrocarbon oxidation, have been used to prepare fatty amines (2,9). In 1978 Eastern Europeans produced an estimated 0.55 biUion kg of synthetic fatty acids with odd and even numbers of carbon atoms, whereas in the United States, production of natural fatty acids with even carbon atom chain-length acids was 435 million kg. To date, there has been no significant production of synthetic fatty acids in the United States. 

For bicyclic structures the von Baeyer name consists of the prefix bicyclo-, followed in square brackets by the numbers of carbon atoms separating the bridgeheads on the three possible routes from one bridgehead to the other, followed in turn by the name of the alkane (or other homogeneous hydride, or repeating unit hydride) containing the same number of atoms in the chain as the whole bicyclic skeleton (examples 55-57). Replacement nomenclature can be applied to hydrocarbon names (example 58). 

The system for naming the straight-chain hydrocarbons is based on an agreed-upon method of retaining the first three or four common names, then using Greek prefixes that indicate the number of carbon atoms in the chain. For isomers, the same system is used, always using the name of the compound that is attached to the chain and the name of the chain. 

---