Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cell voltage lithium iodine

In contrast to the zinc-air battery, the lithium-iodine solid Lil electrolyte battery will last for almost 15 years. A 120-mAh battery with an initial voltage of 2.8 V drops to 2.6 V when discharged continuously at about 1 pA. The cell is written as... [Pg.160]

Hazardous incidents have been experienced with some lithium systems, particularly those using sulphur dioxide and thionyl chloride cathodes. These incidents generally occur at later stages in battery life under reverse current conditions, during voltage reversal and while operating at high temperatures. Safety incidents have not been experienced with lithium-iodine cells, which is why they power 90% of the cardiac pacemakers presently in use. [Pg.413]

Figure 56.21 Projected performance of Catalyst Research Corporation Lithiode TM lithium-iodine cells based on 5 years test data, (a) Voltage under 190kn load, (b) voltage under load (Courtesyof Catalyst Research Corporation)... Figure 56.21 Projected performance of Catalyst Research Corporation Lithiode TM lithium-iodine cells based on 5 years test data, (a) Voltage under 190kn load, (b) voltage under load (Courtesyof Catalyst Research Corporation)...
Figure 56.24 Voltage-capacityrelationshipfor Catalyst Research lithium iodine 2.8V cells (a)ty s 909 (single anode, and (b)920 (doubleanode) (Courtesy of Catalyst Research Corporation)... Figure 56.24 Voltage-capacityrelationshipfor Catalyst Research lithium iodine 2.8V cells (a)ty s 909 (single anode, and (b)920 (doubleanode) (Courtesy of Catalyst Research Corporation)...
Catalyst Research Corporation supply the Lithiode range of disc-shaped lithium—iodine power sources with PC bound mounting for CMOS-RAM as standby power sources and for reference voltage sources and other low-current applications where the cell is the main power source. [Pg.680]

Early publications describe rechargeable batteries made from iodine doped PT combined with zinc or lithium electrodes for the construction of primary and secondary electrochemical cells PT samples has been named to be prepared chemically or -leading to better performances - electrochemically [76-78]. Further studies have confirmed high voltage and good energy density of PT in electrochemical cells, but on the other hand the self-discharging properties as a serious problem for the technical application of this material was also named [79-83]. Battery assemblies with PT as... [Pg.497]


See other pages where Cell voltage lithium iodine is mentioned: [Pg.283]    [Pg.1789]    [Pg.1788]    [Pg.79]    [Pg.83]    [Pg.99]    [Pg.657]    [Pg.304]    [Pg.411]    [Pg.37]    [Pg.49]    [Pg.446]    [Pg.390]    [Pg.282]    [Pg.2]   


SEARCH



Cell voltage

Cells iodination

Lithium cells

Lithium-iodine

Lithium-iodine cells

© 2024 chempedia.info