Cathode materials layered

Another application of the electrolysis of tantalum and niobium in fluoride melts is in the preparation of intermetalic compounds as a result of the interaction between the electrochemically precipitating metal and the cathode material. Based on an investigation of the electrochemical reduction of K2TaF7 or K2NbF7 in a LiF - NaF melt on nickel cathodes, Taxil and Qiao [565] determined the appropriate conditions for the formation of TaNi3 or NbNi3 in the form of stable phases in the bulk of the obtained layer. 

This presentation reports some studies on the materials and catalysis for solid oxide fuel cell (SOFC) in the author s laboratory and tries to offer some thoughts on related problems. The basic materials of SOFC are cathode, electrolyte, and anode materials, which are composed to form the membrane-electrode assembly, which then forms the unit cell for test. The cathode material is most important in the sense that most polarization is within the cathode layer. The electrolyte membrane should be as thin as possible and also posses as high an oxygen-ion conductivity as possible. The anode material should be able to deal with the carbon deposition problem especially when methane is used as the fuel. 

Julien, C., Letranchant, C., Rangan, S., Lemal, M., Ziolkiewicz, S., Castro-Garcia, S., El-Farh, L., Benkaddour, M., Layered LiNi0j5Co0j5O2 cathode materials grown by soft-chemistry via various solution methods, Mater. Sci. Eng. B76, 145-165 (2000). 

An example of a layer structure mixed conductor is provided by the cathode material L CoC used in lithium batteries. In this solid the ionic conductivity component is due to the migration of Li+ ions between sheets of electronically conducting C0O2. The production of a successful mixed conductor by doping can be illustrated by the oxide Cei-jPxx02- Reduction of this solid produces oxygen vacancies and Pr3+ ions. The electronic conductivity mechanism in these oxides is believed to be by way of electron hopping between Pr4+ and Pr3+, and the ionic conductivity is essentially vacancy diffusion of O2- ions. 

Due to the relatively high mobility of holes compared with the mobility of electrons in organic materials, holes are often the major charge carriers in OLED devices. To better balance holes and electrons, one approach is to use low WF metals, such as Ca or Ba, protected by a stable metal, such as Al or Ag, overcoated to increase the electron injection efficiency. The problem with such an approach is that the long-term stability of the device is poor due to its tendency to create detrimental quenching sites at areas near the EML-cathode interface. Another approach is to lower the electron injection barrier by introducing a cathode interfacial material (CIM) layer between the cathode material and the organic layer. The optimized thickness of the CIM layer is usually about 0.3-1.0 nm. The function of the CIM is to lower... 

---