Catalyst copper-chromium

Hydrogenation Copper chromite (Lazier catalyst). Copper chromium oxide (Adkins catalyst). Lindlar catalyst (see also Lithium ethoxyacetylide, Malealdehyde, Nickel boride). Nickel catalysts. Palladium catalysts. Palladium hydroxide on carbon. Perchloric acid (promoter). Platinum catalysts. Raney catalysts, Rhenium catalysts. Rhodium catalysts. Stannous chloride. Tributylborane. Trifluoroicetic acid, Tris (triphenylphosphine)chlororhodium. 

COPPER CHROMITE CATALYST (Copper-Chromium Oxide)... 

Of the derivatives of p-phenylenediamine, the most effective are the N, N -di-alkyl derivatives, in which the alltyl possesses a branched hydrocarbon chain on the carbon closest to the nitrogen atom [235]. They are usually produced by reductive allq lation of p-nitroaniline, p-phenyl-enediamine, p-nitrodiphenylamine, p-nitrosodiphenylamine, or p-amino-diphenylamine with aldehydes and ketones [236-252] with hydrogen at a temperature of 100-250°C and a pressure from 5 to 200 atm in the presence of catalysts. Copper-chromium catalysts (mixtures of oxides of the metals chromium, copper, barium, etc.) [241, 242, 245-247, 249, 250], iodine in the presence of HCl, HBr, or HI [253, 254], Pt/C [245, 252], and Raney nickel [244] are most often used as the catalysts. 

By passing the alcohol vapour over a copper - chromium oxide catalyst deposit on pumice and heated to 330°, for example ... 

This preparation illustrates the use of the copper-chromium oxide catalyst in the r uotion of esters of dibasic acids to glycols ... 

Plot of pMp° - p) against p/p° (r is expressed in cm (stp)). (1) Unpromoted Fe catalyst (2) AljOj-promoted Fe catalyst (3) AI2O3-KjO-promoted Fe catalyst (4) fused copper catalyst (5) chromium oxide gel (6) silica gel. (Courtesy Brunauer, Emmett and Teller.)... 

The equilibrium is more favorable to acetone at higher temperatures. At 325°C 97% conversion is theoretically possible. The kinetics of the reaction has been studied (23). A large number of catalysts have been investigated, including copper, silver, platinum, and palladium metals, as well as sulfides of transition metals of groups 4, 5, and 6 of the periodic table. These catalysts are made with inert supports and are used at 400—600°C (24). Lower temperature reactions (315—482°C) have been successhiUy conducted using 2inc oxide-zirconium oxide combinations (25), and combinations of copper-chromium oxide and of copper and silicon dioxide (26). 

Aromatic rings in lignin may be converted to cyclohexanol derivatives by catalytic hydrogenation at high temperatures (250°C) and pressures (20—35 MPa (200—350 atm)) using copper—chromium oxide as the catalyst (11). Similar reduction of aromatic to saturated rings has been achieved using sodium in hquid ammonia as reductants (12). 

Other catalysts that can be used are boron trifluoride (5), copper—chromium oxides (6), phosphoric acid (7), and siUca-alurnina (8). Under similar conditions, ethanol yields /V-ethylaniline [103-69-5] and /V,/V-diethylaniline [91-66-7] (9,10). 

The heavy metals, copper, chromium, mercury, nickel, and 2inc, which are used as catalysts and complexing agents for the synthesis of dyes and dye intermediates, are considered priority poUutants (313). 

Two classes of metals have been examined for potential use as catalytic materials for automobile exhaust control. These consist of some of the transitional base metal series, for instance, cobalt, copper, chromium, nickel, manganese, and vanadium and the precious metal series consisting of platinum [7440-06-4], Pt palladium [7440-05-3], Pd rhodium [7440-16-6], Rh iridium, [7439-88-5], Ir and mthenium [7440-18-8], Ru. Specific catalyst activities are shown in Table 3. 

Metals in the platinum family are recognized for their ability to promote combustion at lowtemperatures. Other catalysts include various oxides of copper, chromium, vanadium, nickel, and cobalt. These catalysts are subject to poisoning, particularly from halogens, halogen and sulfur compounds, zinc, arsenic, lead, mercury, and particulates. It is therefore important that catalyst surfaces be clean and active to ensure optimum performance. 

The relatively high cost and lack of domestic supply of noble metals has spurred considerable efforts toward the development of nonnoble metal catalysts for automobile exhaust control. A very large number of base metal oxides and mixtures of oxides have been considered, especially the transition metals, such as copper, chromium, nickel, manganese, cobalt vanadium, and iron. Particularly prominent are the copper chromites, which are mixtures of the oxides of copper and chromium, with various promoters added. These materials are active in the oxidation of CO and hydrocarbons, as well as in the reduction of NO in the presence of CO (55-59). Rare earth oxides, such as lanthanum cobaltate and lanthanum lead manganite with Perovskite structure, have been investigated for CO oxidation, but have not been tested and shown to be sufficiently active under realistic and demanding conditions (60-63). Hopcalities are out-... 

Other potential poisons include zinc, manganese, chlorine, and bromine. A number of metals may be deposited on the catalysts from engine erosion and wear, including copper, chromium, nickel, and iron. The mechanism of poisoning has been reviewed by Maxted (134) and by Butt (135). 

Chromium compounds as catalysts, 188 Chromium oxide in catalytic converter, 62 Chromium oxide catalysts, 175-184 formation of active component, 176,177 of Cr-C bonds, 177, 178 propagation centers formation of, 175-178 number of, 197, 198 change in, 183, 184 reduction of active component, 177 Clear Air Act of 1970, 59, 62 Cobalt oxide in catalytic converter, 62 Cocatalysts, 138-141, 152-154 Competitive reactions, 37-43 Copper chromite, oxidation of CO over, 86-88... 

Some more recent processes have been developed which involve direct hydrogenation of the oil to the fatty acid and 1,2-propane diol. These high-temperature (>230 °C) and high-pressure processes generally use a copper chromium oxide catalyst. 

Other metal oxide catalysts studied for the SCR-NH3 reaction include iron, copper, chromium and manganese oxides supported on various oxides, introduced into zeolite cavities or added to pillared-type clays. Copper catalysts and copper-nickel catalysts, in particular, show some advantages when NO—N02 mixtures are present in the feed and S02 is absent [31b], such as in the case of nitric acid plant tail emissions. The mechanism of NO reduction over copper- and manganese-based catalysts is different from that over vanadia—titania based catalysts. Scheme 1.1 reports the proposed mechanism of SCR-NH3 over Cu-alumina catalysts [31b],... 

Heavy metals are widely used as catalysts in the manufacture of anthraquinonoid dyes. Mercury is used when sulphonating anthraquinones and copper when reacting arylamines with bromoanthraquinones. Much effort has been devoted to minimising the trace metal content of such colorants and in effluents from dyemaking plants. Metal salts are used as reactants in dye synthesis, particularly in the ranges of premetallised acid, direct or reactive dyes, which usually contain copper, chromium, nickel or cobalt. These structures are described in detail in Chapter 5, where the implications in terms of environmental problems are also discussed. Certain basic dyes and stabilised azoic diazo components (Fast Salts) are marketed in the form of tetrachlorozincate complex salts. The environmental impact of the heavy metal salts used in dye application processes is dealt with in Volume 2. 

---