Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Carboxaldehyde

A full account of the syntheses of the four isomeric 20,22-epoxycholesterols is accompanied by two similar reports. Pregnenolone has been converted by two independent routes into 25-oxo-27-norcholesteryl acetate. Both routes employed the highly stereoselective platinium-catalysed hydrogenation of the 20,22-double bond which in one case was shown to have the E-configuration. Three additional syntheses of 25-hydroxycholesterol have been reported. The 6/3-methoxy-3a,5a-cyclo-20-carboxaldehyde (261), derived from stig-masterol, was converted into the diene (262) " or the dichloro-olefin (263) and thence into 25-hydroxycholesterol as indicated in Scheme 10. Alternatively the side-chain of the bromo-derivative (264) was extended as indicated in Scheme 2 2 186... [Pg.266]

Our first synthesis of brassinolide started from stigmasterol which was converted to (20S)-6p-methoxy-3a,5-cyclo-5a-pregnane-20-carboxaldehyde (2). This pathway involved formation of the mesylate with methanesulfonyl chloride in pyridine and tetrahydrofuran, treatment of the mesylate with potassium acetate in methanol, and ozonolysis of die i-sterol with reductive work-up. [Pg.41]

An example of an intermolecular aldol type condensation, which works only under acidic catalysis is the Knoevenagel condensation of a sterically hindered aldehyde group in a formyl-porphyrin with a malonic ester (J.-H. Fuhrhop, 1976). Self-condensations of the components do not occur, because the ester groups of malonic esters are not electrophilic enough, and because the porphyrin-carboxaldehyde cannot form enolates. [Pg.56]

Cyclopentene-l-carboxaldehydes are obtained from cyclohexene precursors by the sequence cyclohexene - cyclohexane-1,2-diol -> open-chain dialdehyde - cyclopentane aldol. The main advantage of this ring contraction procedure is, that the regio-and stereoselectivity of the Diels-Alder synthesis of cyclohexene derivatives can be transferred to cyclopentane synthesis (G. Stork, 1953 G. BUchi, 1968). [Pg.81]

Tryptophans can also be prepared by reduction of a,(3-dehydrotryptophans. These can be obtained by a classical azlactone type synthesis from derivatives of indole-3-carboxaldehyde. These reactions usually rquire an iV-EW substituent and the yields are modest[15]. [Pg.131]

Better results have been obtained using the 3-(2-pyrrolidinylidene)indolenine intermediate 13.3A which can be prepared from indole-3-carboxaldehyde and pyrrolidine[16]. [Pg.131]

The conversion of esters to hydrazides and of hydrazides to the sulfonyl derivatives occurs in good yield in the McFadyen-Stevens synthesis, but the decomposition of sulfonyl derivatives gives low yields of the desired products, for example, thiazole hydrazide (28) with 10% excess of PhSOjCl in pyridine gave a 75% yield of l-phenylsulfonyl-2-(4-methyl-5-thiazo ecarbonyl)hydrazine (29) (66). The Newman-Caflish modification of the McFadyen-Stevens synthesis gave 37% 4-methyl-5-thiazole-carboxaldehyde (30) (Scheme 27). [Pg.533]

The reduction of thiazole carboxaldehydes with isopropanol and aluminium isopropoxide gives the corresponding alcohols (37, 107, 108). [Pg.535]

Bisa.codyl, 4,4 -(2-PyridyLmethylene)bisphenol diacetate [603-50-9] (Dulcolax) (9) is a white to off-white crystalline powder ia which particles of 50 p.m dia predominate. It is very soluble ia water, freely soluble ia chloroform and alcohol, soluble ia methanol and ben2ene, and slightly soluble ia diethyl ether. Bisacodyl may be prepared from 2-pyridine-carboxaldehyde by condensation with phenol and the aid of a dehydrant such as sulfuric acid. The resulting 4,4 -(pyridyLmethylene)diphenol is esterified by treatment with acetic anhydride and anhydrous sodium acetate. Crystallisation is from ethanol. [Pg.201]

An alternative route to 5-nitro-2-furancarboxaldehyde requires nitration of 2-furancarboxaldehyde oxime [1121 -47-7] with mixed acid to give the nitrated oxime [555-15-7] and concomitant hydrolysis (22). Furthermore, 2-furan-carboxaldehyde derivatives with the R-substituent in place have been nitrated to the desired product (23). [Pg.460]

Nitrovin. 2- 3-(5-Nitro-2-furanyl)-l-[2-(5-nitro-2-furanyl)ethenyl]-2-propenyhdene hydrazinecarboximidamide hydrochloride has been marketed for both human and veterinary use as an antibacterial agent. The product, which has also seen use as a veterinary food additive (32), is prepared from 5-nitro-2-furan-carboxaldehyde and acetone followed by treatment of the resulting dione with aininoguariidine (33). [Pg.461]

Pstyrylquinoline [13362-63-5]. This chemistry is also useful with the pyridine carboxaldehydes to form adequate yields of the corresponding... [Pg.395]

Especially sensitive quinones can be generated in situ, the diene adduct, eg (88), can be obtained in excellent yield (87). For R = methoxycarbonyl, carboxaldehyde, and acetyl, the yields are 95, 97, and 100%, respectively. [Pg.414]

Acylthiophenes. Manufacturing methods introducing the carboxaldehyde group into the 2- or 5-positions of thiophene and alkylthiophenes utilise the Vilsmeier-Haack reaction. To synthesize 2-thiophenecarboxaldehyde (Table 5), a controlled addition of phosphoms oxychloride to thiophene in /V, /V- dim ethyl form am i de is carried out, causing the temperature to rise. Completion of the reaction is followed by an aqueous quench, neutralization, and solvent extraction to isolate the product. [Pg.21]

Other methods for the preparation of cyclohexanecarboxaldehyde include the catalytic hydrogenation of 3-cyclohexene-1-carboxaldehyde, available from the Diels-Alder reaction of butadiene and acrolein, the reduction of cyclohexanecarbonyl chloride by lithium tri-tcrt-butoxy-aluminum hydride,the reduction of iV,A -dimethylcyclohexane-carboxamide with lithium diethoxyaluminum hydride, and the oxidation of the methane-sulfonate of cyclohexylmethanol with dimethyl sulfoxide. The hydrolysis, with simultaneous decarboxylation and rearrangement, of glycidic esters derived from cyclohexanone gives cyclohexanecarboxaldehyde. [Pg.15]

Concern for the conservation of energy and materials maintains high interest in catalytic and electrochemistry. Oxygen in the presence of metal catalysts is used in CUPROUS ION-CATALYZED OXIDATIVE CLEAVAGE OF AROMATIC o-DIAMINES BY OXYGEN (E,Z)-2,4-HEXADIENEDINITRILE and OXIDATION WITH BIS(SALI-CYLIDENE)ETHYLENEDIIMINOCOBALT(II) (SALCOMINE) 2,6-DI-important industrial method, is accomplished in a convenient lab-scale process in ALDEHYDES FROM OLEFINS CYCLOHEXANE-CARBOXALDEHYDE. An effective and useful electrochemical synthesis is illustrated in the procedure 3,3,6,6-TETRAMETHOXY-1,4-CYCLOHEX ADIENE. ... [Pg.129]

Hydrogenation of 19-hydroxy-3a- and 3j5-substituted-A -steroids over platinum or rhodium yields increased amounts of 5j9-products as compared to the corresponding 19-desoxy series (hydroxyl group effect). In contrast, the A -19-carboxaldehyde (27) gives only the 5a-product when hydrogenated over either palladium or platinum. ... [Pg.120]

An example of the use of NMR spectroscopy to ascertain with reasonable certainty the stereochemistry of a series of enamines has been provided by Paquette (25). Based on a study of the NMR spectra of the endo- and exo-5-norbornene-2-carboxaldehydes (168), the enamine mixtures were estimated to contain 80 to 90 % of the transoid form (170). [Pg.92]

Enamine acylations have been extended to include the Vilsmeier reaction (409) and thus provide a method for the generation of formyl ketones without the use of strong base. By this method an unsaturated potential trialdehyde could be formed as an intermediate in a pyridine-3-carboxaldehyde synthesis (410). [Pg.391]

Reaction between [W(RC=C)Cl(CO)2(py)2] (R = Ph, Me) with the anionic chelating Schiff base pyrrole-2-carboxaldehyde methylimine yields the cationic complexes [NEt4][W(RCCO)(NN)2(CO)] (where NN is the dianion of the pyrrole ligand). These complexes react with methyltriflate, forming the neutral acetylenic complexes [W(NN)2(CO)(RC=COMe)] (87OM1503). One of the pyrrolic Schiff bases is coordinated via the pyrrole and imino nitrogen atoms, and another one only via the imino nitrogen atom. [Pg.118]

Indole-2,3-quinodimethanes have also been exploited as the key intermediates in indolo[2,3-a]caibazole synthesis, allowing the preparation of several interesting systems. Thus, when the starting materials 74a-b (obtained from the condensation of protected indole-2-carboxaldehydes with 2-aminostyrene) underwent treatment with methyl chloroformate in hot chlorobenzene, the carbamates 75a-b were obtained, and could subsequently be dehydrogenated into the aromatic compounds 76a-b (Scheme 11). However, all functionalization attempts of the methyl... [Pg.15]


See other pages where Carboxaldehyde is mentioned: [Pg.326]    [Pg.39]    [Pg.115]    [Pg.115]    [Pg.128]    [Pg.140]    [Pg.141]    [Pg.155]    [Pg.156]    [Pg.409]    [Pg.574]    [Pg.13]    [Pg.346]    [Pg.289]    [Pg.85]    [Pg.85]    [Pg.87]    [Pg.128]    [Pg.149]    [Pg.385]    [Pg.409]    [Pg.56]    [Pg.20]   
See also in sourсe #XX -- [ Pg.19 , Pg.471 ]

See also in sourсe #XX -- [ Pg.19 , Pg.471 ]




SEARCH



1 -Cyclopentene-1 -carboxaldehydes

1-Cyclohexene-1-carboxaldehyde, 3-hydroxy

1-Pyrene carboxaldehyde

1-Pyrene carboxaldehyde micelles

1-Pyrene carboxaldehyde probe

1-Pyrene carboxaldehyde systems

1.4- Dihydropyridine-3-carboxaldehydes

2- Hydroxy-3-pyridine carboxaldehydes

2.4- Dichloroquinoline-3-carboxaldehyde formation

2.4- Dimethyl-3-cyclohexene carboxaldehyd

277- Benzopyran-3-carboxaldehydes

2H-Pyran-5-carboxaldehydes

3- Methylquinoxaline-2-carboxaldehyde

3- PHENYL-2//-AZIRINE-2-CARBOXALDEHYDE

3-Methylquinoxaline-2-carboxaldehyde 1,4-dioxide

4- -3-cyclohexene carboxaldehyde

4- Iodoindole-3-carboxaldehyde

4-Aminopyrimidine-5-carboxaldehyde

5- nitrothiophene-2-carboxaldehyd

5-Norbornene-2-carboxaldehyde

6- dione-5-carboxaldehyde

6-methoxyindole-3-carboxaldehyde

Benzodioxole-5-carboxaldehyde

Carbonyl carboxaldehyde

Carboxaldehyde derivatives

Carboxaldehydes

Catalytic system carboxaldehyde

Chromane-2-carboxaldehyde

Chromone-3-carboxaldehyde

Chromone-3-carboxaldehydes

Cycloalkane carboxaldehydes

Cyclohexane carboxaldehyde

Cyclohexane carboxaldehydes

Cyclohexene carboxaldehydes, synthesis

Cyclopropane carboxaldehyde

Dimethyl-1,3-dioxolane-4-carboxaldehyde

Ferrocene carboxaldehyde

Ferrocene carboxaldehyde derivatives

Ferrocenes ferrocene carboxaldehyde

Fluorescence probe 1-pyrene carboxaldehyde

Furan-2-carboxaldehyde

Furane-carboxaldehyde

Heterocyclic carboxaldehyde

Heterocyclic carboxaldehyde thiosemicarbazones

IMIDAZOLE-2-CARBOXALDEHYDE

Indol-3-carboxaldehyde

Indole-2-carboxaldehydes

Indole-3-carboxaldehyde

Indole-3-carboxaldehyde, conversion

Indole-3-carboxaldehydes, reactions

Lndole-3-carboxaldehyde

Naphthalene-2-carboxaldehyde

Oxazole-4-carboxaldehyde

Pyrazole-4-carboxaldehydes

Pyridine-2-carboxaldehyde oxime

Pyridine-3-carboxaldehyde condensation

Pyridine-4-carboxaldehyde

Pyrrol-2-carboxaldehyde

Pyrrole - 3 - carboxaldehyde, 4 - acetyl l-p-anisyl-5-methyl semicarbazone

Pyrrole-2-carboxaldehyde derivatives

Pyrrole-2-carboxaldehyde methylimine

Pyrrole-2-carboxaldehydes

Pyrrole-2-carboxaldehydes Oxidation

Quinazoline-2-carboxaldehyde

Quinoline-8-carboxaldehyde

Quinoxaline-2-carboxaldehyde

Quinoxaline-2-carboxaldehyde preparations

Quinoxaline-2-carboxaldehyde reactions

Quinoxaline-2-carboxaldehydes

Quinoxaline-2-carboxaldehydes preparations

Thiophene-2-carboxaldehyde

© 2024 chempedia.info