Carbon mechanical properties

Inorganic membranes (29,36) are generaUy more stable than their polymeric counterparts. Mechanical property data have not been definitive for good comparisons. IndustriaUy, tube bundle and honeycomb constmctions predominate with surface areas 20 to 200 m. Cross-flow is generaUy the preferred mode of operation. Packing densities are greater than 1000 /m. Porous ceramics, sintered metal, and metal oxides on porous carbon support... 

The number of branches in HDPE resins is low, at most 5 to 10 branches per 1000 carbon atoms in the chain. Even ethylene homopolymers produced with some transition-metal based catalysts are slightly branched they contain 0.5—3 branches per 1000 carbon atoms. Most of these branches are short, methyl, ethyl, and -butyl (6—8), and their presence is often related to traces of a-olefins in ethylene. The branching degree is one of the important stmctural features of HDPE. Along with molecular weight, it influences most physical and mechanical properties of HDPE resins. 

Nonoxide fibers, such as carbides, nitrides, and carbons, are produced by high temperature chemical processes that often result in fiber lengths shorter than those of oxide fibers. Mechanical properties such as high elastic modulus and tensile strength of these materials make them excellent as reinforcements for plastics, glass, metals, and ceramics. Because these products oxidize at high temperatures, they are primarily suited for use in vacuum or inert atmospheres, but may also be used for relatively short exposures in oxidizing atmospheres above 1000°C. 

Rubber. The mbber industry consumes finely ground metallic selenium and Selenac (selenium diethyl dithiocarbamate, R. T. Vanderbilt). Both are used with natural mbber and styrene—butadiene mbber (SBR) to increase the rate of vulcanization and improve the aging and mechanical properties of sulfudess and low sulfur stocks. Selenac is also used as an accelerator in butyl mbber and as an activator for other types of accelerators, eg, thiazoles (see Rubber chemicals). Selenium compounds are useflil as antioxidants (qv), uv stabilizers, (qv), bonding agents, carbon black activators, and polymerization additives. Selenac improves the adhesion of polyester fibers to mbber. 

The uses of steel are too diverse to be Hsted completely or to serve as a basis of classification. Inasmuch as grades of steel are produced by more than one process, classification by method of manufacture is not advantageous. The most useful classification is by chemical composition into the large groups of carbon steels, alloy steels, and stainless steels. Within these groups are many subdivisions based on chemical composition, physical or mechanical properties, or uses. 

The physical and mechanical properties of steel depend on its microstmcture, that is, the nature, distribution, and amounts of its metaHographic constituents as distinct from its chemical composition. The amount and distribution of iron and iron carbide determine most of the properties, although most plain carbon steels also contain manganese, siUcon, phosphoms, sulfur, oxygen, and traces of nitrogen, hydrogen, and other chemical elements such as aluminum and copper. These elements may modify, to a certain extent, the main effects of iron and iron carbide, but the influence of iron carbide always predominates. This is tme even of medium alloy steels, which may contain considerable amounts of nickel, chromium, and molybdenum. 

Eig. 25. Variations ia average mechanical properties of as-roUed 2.5-cm bars of plain carbon steels, as a function of carbon content (1). 

Mechanical Properties and Stability at Elevated Temperature. One increasingly important characteristic of carbon fibers is their excellent performance at elevated temperatures. Strength tested in an inert environment remains constant or slightly increases to temperatures exceeding 2500°C. Amoco s high modulus pitch carbon fiber P-50 maintains approximately 80% of room temperature modulus at temperatures up to 1500°C, then decreases more rapidly to 30% at 2800°C (64). The rapid decrease in modulus is a result of increased atomic mobiHty, increa sing fiber plasticity. 

Most recent studies (69) on elevated temperature performance of carbon fiber-based composites show that the oxidation resistance and elevated temperature mechanical properties of carbon fiber reinforced composites are complex and not always direcdy related to the oxidation resistance of the fiber. To some extent, the matrix acts as a protective barrier limiting the diffusion of oxygen to the encased fibers. It is therefore critical to maintain interfacial bonding between the fiber and the matrix, and limit any microcracking that may serve as a diffusion path for oxygen intmsion. Since interfacial performance typically deteriorates with higher modulus carbon fibers it is important to balance fiber oxidative stabiHty with interfacial performance. 

Mechanical properties depend on the alloying elements. Addition of carbon to the cobalt base metal is the most effective. The carbon forms various carbide phases with the cobalt and the other alloying elements (see Carbides). The presence of carbide particles is controlled in part by such alloying elements such as chromium, nickel, titanium, manganese, tungsten, and molybdenum that are added during melting. The distribution of the carbide particles is controlled by heat treatment of the solidified alloy. 

---