Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Carbon DLC Coatings

DEC coating was first prepared by Aisenberg and Chabot using ion beam deposition in 1971 [2]. At present, PVD, such as ion beam deposition, sputtering deposition, cathodic vacuum arc deposition, pulsed laser deposition, and CVD, like plasma enhanced chemical vapor deposition are the most popular methods to be selected to fabricate DEC coatings. [Pg.147]

In ion beam deposition, hydrocarbon gas such as methane or ethyene is ionized into plasma by an ion source such as the Kaufman source [3]. The hydrocarbon ions are then extracted from the ion source and accelerated to form an ion beam. The ions and the unionized molecules condense on the substrate surface to form DEC coating. However, in this method, ionized ratio of precursor gases could hardly exceed 10 %. In order to obtain a better quality of DEC coatings. [Pg.147]

Copyright by ASTM Int l (all rights reserved) Sat Jun 13 22 24 32 EDT 2009 Downloaded/printed by [Pg.147]

Vacuum arc can also be initiated by pulsed laser, as shown in Fig. 4 [15,16]. The target material is first vaporized into plasma by pulsed laser, and vacuum arc is subsequently initiated and more plasma is generated under the function of the electric field between the anode and the cathode (target). Since the arc is controllable, the surface quality might be evi- [Pg.148]


Kimock, F. M. and Knapp, B. J., Commercial Applications of Ion Beam Deposited Diamond-like Carbon (DLC) Coatings," Surf. Coat. Technol, Vol. 56,1993,pp. 273-279. [Pg.163]

Sheeja, D. Tay, B.K. Krishnan, S.M. Nung, L.N. Tribological characterization of diamond-like carbon (DLC) coatings sliding against DLC coatings. Diamond Relat. Mater. 2003,12, 1389-1395. [Pg.694]

Diamond-like carbon (DLC) (coating thickness in micrometres)... [Pg.283]

Kimock FM, Knapp BJ. Commercial applications of ion-beam deposited diamond-like carbon (DLC) coatings. Surf Coat Technol 1993 56 273-9. [Pg.115]

Ni, W., Cheng, Y. T., Weiner, A. M. and Perry, T. A. Tribological Behavior of Diamond-Like-Carbon (DLC) Coatings Against Aluminum Alloys at Elevated Temperatures, Sat/aee and Coatings Technology, Vol. 201,2006, pp. 3229-34. [Pg.374]


See other pages where Carbon DLC Coatings is mentioned: [Pg.399]    [Pg.2]    [Pg.147]    [Pg.200]    [Pg.399]    [Pg.382]    [Pg.11]    [Pg.227]    [Pg.306]    [Pg.234]    [Pg.20]    [Pg.8]    [Pg.65]    [Pg.93]    [Pg.100]    [Pg.578]   


SEARCH



Carbon coated

DLC coatings

© 2024 chempedia.info