Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Capacity assessment

Zhou et al. [55], The most effective method to assess the capacity is the flow simulation which includes volumetric formulas and more reservoir parameters rather than other methods [56], Mass balance and constitutive relations are accounted in mathematical models to capacity assessment and dimensional analysis consists of fractional flow formulation with dimensionless assessment and analytical approaches [33], From the formulations demonstrated by Okwen and Stewart for analytical investigation, it can be deduced that the C02 buoyancy and injection rate have affected the storage capacity [57], Zheng et al. have indicated the equations employed in Japanese and Chinese methodology and have noted that some parameters in Japanese relation can be compared to the CSLF and DOE techniques [58]. [Pg.161]

Brennan S.T. and BurrussR.C. Specific sequstrahon volumes a useful tool for C02 storage capacity assessment.2003 Open-File Report, U.S. Geological Survey, Second Annual Conference on Carbon Sequestration, Alexandria, Virginia, U.S. 03-452. [Pg.168]

Storage capacity assessments of Canadian sedimentary basins, coal seams and oil and gas reservoirs. [Pg.64]

LESTARI (2006). Institute for Environment and Development (LESTARI) 2006. Regional GHS Capacity Assessment in ASEAN. Final report. [Pg.117]

As a prognostic test, ET is very popular after myocardial infarction and can be conducted within 3 days of an acute event. It can be used to determine functional capacity, assess the degree of rehabilitation, and identify patients at risk for further cardiovascular events. Immediately after myocardial infarction, a modified protocol is used the test is terminated when a heart rate of 70% to 75% of age- and gender-predicted maximum is reached (e.g., 140 beats per minute for those under age 40 and 130 for those older than age 40) or a MET level of 5 for patients older than 40 or 7 for those younger than 40. Tests usually are done prior to discharge or within 6 weeks of infarction. [Pg.159]

Bouisset, S., Do, M.C., and Zattara, M. Posturo-kinetic capacity assessed in paraplegics and Parkinsonians. In WooUacott, M. and Horak, E (Eds.), Posture and Gait Control Mechanisms. University Oregon Books, Portland, OR, pp. 19-22,1992. [Pg.246]

Monfreda, C., Wackemagel, M., DeumUng, D., 2004. Establishing national natural capital accounts based on detailed ecological footprint and biological capacity assessments. Land Use Policy 21, 231-246. http //dx.doi.Org/10.1016/j.landusepol.2003.10.009. [Pg.82]

The use of water as a solvent introduces some complexity to the drying capacity assessment, since water is always present in the air at varying amounts. The amount of water present is indicated by dew point. The air capacity versus temperature plot for water from Figure 7.14 is shown in Figures 7.17 and 7.18 along with curves indicating water content at various dew points. The saturation curve is the point at which air capacity for water is filled. For example, the air can hold -0.965 g water vapor/fF at... [Pg.136]

Title I of the Americans with DisabUity Act (ADA, 1990) prohibits discrimination with regard to any aspect of the employment process. Thus, the development of preplacement tests has been impeded by the possibility of discrimination against individuals based on gender, age, or medical condition. The ADA requires physical tests to simulate the essential functions of the task. In addition, one must be aware of reasonable accommodations, such as lifting aids, that may make an otherwise infeasible task possible for a disabled applicant to perform. Healthcare providers who perform physical examinations and provide recommendations for job apphcants must consider the rights of disabled applicants. It is extremely crucial to quantify the specific physical requirements of the job to be performed and to examine an applicant s capabilities to perform those specific tasks, taking into account any reasonable accommodations that may be provided. Hence, task analysis and functional capacity assessment are truly intertwined. [Pg.602]

Are employees j ysical capacities assessed before they are assigned to jobs requiring heavy work ... [Pg.185]

Before changing any medication (including PRN), check the patient s MHA status and whether their treatment is under T2 or T3. Document a capacity assessment and try to gain consent before starting new medicatioa If you re ever unsure, check with a senior doctor before prescribing. [Pg.189]

Capacity isn t an all-or-nothing phenomenon but is decision and time specific. Detention under the MHA doesn t mean someone lacks capacity. Capacity assessments should be repeated at frequent intervals, and whenever offering a new treatment. See Ch.76 for details. [Pg.190]

You may also be asked to assist with capacity assessment (Ch. 76) or even to section Mrs Black if she s trying to leave. There s often a question of whether DoLS or the MHA should be used. [Pg.563]

Joint capacity assessment with the treating ED doctor... [Pg.717]

Ben needs to communicate his decision. Refusal to engage with a capacity assessment is evidence of inability to communicate, so capacity can be deemed absent. [Pg.719]

A fully automated FI method for antioxidant capacity assessment based on a low-cost laboratory-made analyzer was also reported [79]. Precision was better than 5% relative standard deviation (R.S.D.), and the linear range was 4-100 pM. The method was applied to pure compound, wine, and honey samples. [Pg.609]

The amperometric detection has been widely implemented in diverse FIA systems to measure the total reducing capacity, which is correlated with the antioxidant activity (Magalhaes et al., 2009). These flow systems do not require the use of reactive species, radicals or nonradicals, which is an important issue, as the antioxidant capacity assessed is strongly dependent on the oxidant species applied. Table 33.1 describes the features... [Pg.649]

Flynn, G.M., Benkouar, A., Christien, R. 2005. Adaptation of Workload Model by Optimisation Algorithms and Sector Capacity Assessment. EEC Note No. 07/05. [Pg.987]

Prieto-Simon, B., Cortina, M., Campas, M., Calas-Blanchard, C., 2008. Electrochemical biosensors as a tool for antioxidant capacity assessment. Sens. Actuators B Chem. 129, 459—466. [Pg.202]

Adam C, Jager C (2012b) Simplified collapse capacity assessment of earthquake excited regular frame structures vulnerable to P-delta. Eng Struct 44 159—173... [Pg.2750]

Shafei B, Zareian F, Lignos DG (2011) A simplified method for collapse capacity assessment of moment-resisting frame and shear wail structural systems. Eng Struct 33 1107-1116... [Pg.2752]

In a more general way, thermogravimetry, with simple and short experiments allow preliminary screenings of catalysts where multiple variables are being considered. In just one experiment, the capacity of an adsorbent can be evaluated over an entire temperature range. It is also possible to collect qualitative information about the initial adsorption rates. Thermogravimetry, which has been appUed to the preparation and characterization of adsorbents, has also proved to be a useful technique for preliminary adsorption capacity assessment. This is especially the case for the CO2 capture performance of the sorbents and their thermal stability. For example, the evaluation of aminated soUd sorbents for the CO2 capture performance was evaluated [47],... [Pg.88]


See other pages where Capacity assessment is mentioned: [Pg.49]    [Pg.428]    [Pg.333]    [Pg.2561]    [Pg.1368]    [Pg.138]    [Pg.1104]    [Pg.521]    [Pg.2430]    [Pg.132]    [Pg.134]    [Pg.523]    [Pg.2746]    [Pg.1433]    [Pg.234]   


SEARCH



© 2024 chempedia.info