Cadmium metallurgy

H. O. Hoffman, Metallurgy of Zinc and Cadmium McGraw-HiU Book Co., New York, 1922. 

But first the synthesis had to come John was interested in reduced metal halides, particularly for the post-transition metals cadmium, galHum, and bismuth (his Ph.D. dissertation was on anhydrous aluminum halides and mixed halide intermediates, a good start for what was to come ). However, he was not yet actively interested in rare-earth metals and their remarkable solubility in their halides. But these elements lured him one floor below where Adrian Daane headed the metallurgy section of Spedding s empire. He knew how to produce rare-earth metals with high purity and in sufficient quantity and also how to handle tantalum containers. What if one gave it a tr/ and reduced some rare-earth metal halides (John insists that this term is used correctly) from their respective metals at high temperatures under appropriate conditions. 

To protect humans and other mammals, proposed air-quality criteria range from 0.01 to less than 1.0 mg/m3 for metallic nickel and slightly soluble nickel compounds, 0.015-0.5 mg/m3 for water soluble nickel compounds, and 0.005 to 0.7 mg/m3 for nickel carbonyl (Table 6.10). Inhalation of nickel subsulfide concentrations (0.11 to 1.8 mg Ni/m3) near the current threshold limit value of 1 mg Ni/m3 can produce detrimental changes in the respiratory tract of rats after only a few days of exposure (Benson et al. 1995). Additional animal studies are recommended to identify minimally effective inhalation exposure levels for the various nickel compounds (USPHS 1993). Continued monitoring of nickel refining, nickel-cadmium battery manufacture, and nickel powder metallurgy installations is recommended because ambient air levels of bioavailable nickel at these... 

Only minute amounts of cadmium are found in natural waters in the United States. Hazardous waste discharges from the electroplating, photography, insecticide, and metallurgy industries can increase cadmium levels. Another common source of cadmium in drinking water is from... 

Budgen, Cadmium Its Metallurgy, Properties and Uses, Chas. Griffin and... 

Metallurgy. The extraction and separation of metals and plating baths have involved quinoline and certain derivatives see also Electroplating. The extraction of metal ions depends on the chelating ability of 8-hydroxyquinoline. Dilute solutions of heavy metals such as mercury, cadmium, copper, lead, and zinc can be purified using quinoline-8-carboxylic acid adsorbed on various substrates. 

Cadmium releases from landfills have been evaluated by the Draft Risk Assessment Report on Cadmium (DRAR 2000). They can be evaluated at less than 0.3 tonnes/y, this representing less than 0.8% of total emissions of cadmium in water in the EU countries. The major contributors to total cadmium emissions into surface waters are zinc and lead producers, fuel combustion for electricity generation, fuel combustion for road transportation, phosphate industries and non-ferrous metallurgy (DRAR 2000). 

---