C application

The plate dryer is limited in its scope of apphcations only in the consistency of the feed material (the products must be friable, free flowing, and not undergo phase changes) and diying temperatures up to 320°C. Applications include speci ty chemicals, pharmaceuticals, foods, polymers, pigments, etc. Initial moisture or volatile level can be as high as 65 percent and the unit is often used as a final dryer to take materials to a bone-dry state, if necessary. The plate dryer can also be used for heat treatment, removal of waters of hydration (bound moisture), solvent removal, and as a product cooler. 

Reference electrode Me/Me" system Electrolyte Potential at 25°C (V) Temperature dependence (mV/°C) Application... 

Material Deposited Common Precursors Deposition Temp. °C Applications Status... 

Eden, R. C., Application of Synthetic Diamond Substrate for Thermal Management of High Performance Electronic Multi-Chip Modules, in Applications of Diamond Films and Related Materials, (Y. Tzeng, etal., eds.), Elsevier Science Publishers, pp. 259-266(1991)... 

Jen J, Laughlin M, Chung C, Heft S, Affrime MB, Gupta SK, Glue P, Hajian G (2002) Ribavirin dosing in chronic hepatitis C application of population pharmacokinetic-pharmacodynamic models, Clin Pharmacol Ther 72 349-361... 

Green, C.C., Application of Theorem proving to problem solving. Proc. Int. Joint Conf. Art. Intell. 1st, Washington, DC, 1969, pp. 219-239 (1969). 

DE Belleeon, C., Application of microdevices for the fast investigation of catalysis, in Proceedings of the Micro Chemical Plant - International Workshop, pp. L3 (9-17) (4 Eebruary 2003), Kyoto, Japan. 

It is worth noting that within a range of 20 %, five different methods of analyzing the crystallite size, viz., (a) microscopic inspection, (b) application of Eq. (3.1.7) for restricted diffusion in the limit of large observation times, (c) application of Eq. (3.1.15) to the results of the PFG NMR tracer desorption technique, and, finally, consideration of the limit of short observation times for (d) reflecting boundaries [Eq. (3.1.16)] and (e) absorbing boundaries [Eq. (3.1.17)], have led to results for the size of the crystallites under study that coincide. 

Whiteley, J, R., Davis, J. F., Ahmet, M., and Ahalt, S. C.. Application of adaptive Resonance theory for qualitative interpretation of sensor data, Man, Machine and Cybernetics 26(7), July (1996). 

C. Application to the Final Stage of S02 Converter with Composition Forcing... 

A flow cell-procedure was then applied. The experiment consisted of (a) adsorption of methanol (in a solution containing deuterated methanol and light hydrogen base electrolyte), (b) solution exchange with base electrolyte and (c) application of two potential steps, one of short duration to oxidize the adsorbed residue and then a second one in the negative direction to reduce the ions H+ and/or D+ formed. During this time the mass intensity signals for HD, (m/e = 3) and for COz (m/e = 44) were... 

In an altered process to prepare 2,4-dichlorophenoxybutyric acid, the lactone was added to the other components, and soon after, the reaction temperature reached 165°C, higher than the usual 160°C. Application of cooling failed to check the... 

---