Butenes, acidity

Preparation 435.—Citraconic Anhydride [Anhydride of cis 3-carboxy-2-buten acid]. 

For propylene dimerization, four products can be written (Table II) if only vinylic C—H bonds are considered. In Paths 1 and 2 the C—H bond of the terminal carbon atom is added giving rise to two products. If the addition proceeds in the manner of metal hydrides, the product is 2-hexene (Path 1) for acidic-type addition (Markovnikov rule), the product is 4-methyl-2-pentene (Path 2). In Paths 3 and 4, the C—H bond of the middle carbon atom is added," giving rise to 2-methyl-l-pentene (hydridic-type addition) and to 2,3-dimethyl-l-butene (acidic-... 

Secondary butyl ethanoale, CH3CHaCH(Me)0-0CCH3, b.p. 112-113°C. Manufactured by heating 2-butene with etha-noic and sulphuric acids in water. 

Cydopentane reagents used in synthesis are usually derived from cyclopentanone (R.A. Ellison, 1973). Classically they are made by base-catalyzed intramolecular aldol or ester condensations (see also p. 55). An important example is 2-methylcydopentane-l,3-dione. It is synthesized by intramolecular acylation of diethyl propionylsucdnate dianion followed by saponification and decarboxylation. This cyclization only worked with potassium t-butoxide in boiling xylene (R. Bucourt, 1965). Faster routes to this diketone start with succinic acid or its anhydride. A Friedel-Crafts acylation with 2-acetoxy-2-butene in nitrobenzene or with pro-pionyl chloride in nitromethane leads to acylated adducts, which are deacylated in aqueous acids (V.J. Grenda, 1967 L.E. Schick, 1969). A new promising route to substituted cyclopent-2-enones makes use of intermediate 5-nitro-l,3-diones (D. Seebach, 1977). 

Since the exocyclic sulfur is more reactive in the ambident anion than in A-4-thiazoIine-2-thione. greater nucleophilic reactivity is to be expected. Thus a large variety of thioethers were prepared in good yields starting from alkylhalides (e.g.. Scheme 38 (54, 91, 111, 166-179). lactones (54, 160), aryl halides (54, 152. 180, 181), acyl chlorides (54. 149, 182-184). halothiazoles (54, 185-190), a-haloesters (149. 152. 177. 191-194), cyanuric chloride (151). fV.N-dimethylthiocarbamoyl chloride (151, 152. 195. 196), /3-chloroethyl ester of acrylic acid (197), (3-dimethylaminoethyl chloride (152). l,4-dichloro-2-butyne (152), 1,4-dichloro-2-butene (152), and 2-chloro-propionitrile (152). A general... 

As a method for the preparation of alkenes a weakness in the acid catalyzed dehydration of alcohols IS that the initially formed alkene (or mixture of alkenes) sometimes isomenzes under the conditions of its formation Write a stepwise mechanism showing how 2 methyl 1 butene might isomenze to 2 methyl 2 butene in the presence of sulfuric acid... 

Epoxidation of alkenes is a stereospecific syn addition Which stereoisomer of 2 butene reacts with peroxyacetic acid to give meso 2 3 epoxybu tane Which one gives a racemic mixture of (2/ 3/ ) and (25 35) 2 3 epoxybutane ... 

When (R) 3 buten 2 ol is treated with a peroxy acid two stereoisomenc epoxides are formed in a 60 40 ratio The minor stereoisomer has the structure shown... 

When styrene is refluxed with aqueous sulfuric acid two styrene dimers are formed as the major products One of these styrene dimers is 1 3 diphenyl 1 butene the other is 1 methyl 3 phenyhndan Suggest a reasonable mechanism for the formation of each of these compounds... 

Prospective Processes. There has been much effort invested in examining routes to acetic acid by olefin oxidation or from ethylene, butenes, or j -butyl acetate. No product from these sources is known to have reached the world market the cost of the raw materials is generally prohibitive. 

Addition of halogens proceeds stepwise, sometimes accompanied by oxidation. Iodine forms 2,3-diiodo-2-butene-l,4-diol (53). Depending on conditions, bromine gives 2,3-dibromo-2-butene-l,4-diol, 2,2,3,3-tetrabromobutane-l,4-diol, mucobromic acid, or... 

Uncatalyzed addition of hydrochloric acid is accompanied by replacement of one hydroxyl group, giving high yields of 2,4-dichloro-2-buten-l-ol (58) with mercuric or cupric salt catalysts, addition occurs without substitution (59,60). 

Heating with cuprous chloride in aqueous hydrochloric acid isomerizes 2-butene-l,4-diol to 3-butene-l,2-diol (98)] Various hydrogen-transfer catalysts isomerize it to 4-hydroxybutyraldehyde [25714-71-0] (99), acetals of which are found as impurities in commercial butanediol and... 

Treatment with acidic catalysts dehydrates i j -butenediol to 2,5-dihydrofuran [1708-29-8], C H O (100). Cupric (101) or mercuric (102) salts give 2,5-divinyl-l,4-dioxane [21485-51-8], presumably via 3-butene-l,2-diol. 

With Lewis acids as catalysts, compounds containing more than one alkoxy group on a carbon atom add across vinyl ether double bonds. Acetals give 3-alkoxyacetals since the products are also acetals, they can react further with excess vinyl ether to give oligomers (228—230). Orthoformic esters give diacetals of malonaldehyde (231). With Lewis acids and mercuric salts as catalysts, vinyl ethers add in similar fashion to give acetals of 3-butenal (232,233). 

Polygas Olefins. Refinery propylene and butenes are polymerized with a phosphoric acid catalyst at 200°C and 3040—6080 kPa (30—60 atm) to give a mixture of branched olefins up to used primarily in producing plasticizer alcohols (isooctyl, isononyl, and isodecyl alcohol). Since the olefins are branched (75% have two or more CH groups) the alcohols are also branched. Exxon, BASE, Ruhrchemie (now Hoechst), ICl, Nissan, Getty Oil, U.S. Steel Chemicals (now Aristech), and others have all used this olefin source. 

Methyl /-Butyl Ether. MTBE is produced by reaction of isobutene and methanol on acid ion-exchange resins. The supply of isobutene, obtained from hydrocarbon cracking units or by dehydration of tert-huty alcohol, is limited relative to that of methanol. The cost to produce MTBE from by-product isobutene has been estimated to be between 0.13 to 0.16/L ( 0.50—0.60/gal) (90). Direct production of isobutene by dehydrogenation of isobutane or isomerization of mixed butenes are expensive processes that have seen less commercial use in the United States. 

Due to the fact that BF is a weaker Lewis acid than AlCl, stmcturaHy distinct resins are obtained upon the respective polymerization of a piperylenes-2-methyl-2-butene system with the two different Lewis acids. Much lower levels of branched olefin are required to achieve a softening point of <40° C with the BF catalyzed system (33,36). In fact, due to its weaker acidity, BF is not useful for producing high softening point resins based on C-5 hydrocarbon feeds. 

Isoprene reacts with a-chloroalkyl ethers in the presence of ZnCl in diethyl ether from 0—10°C. For example,a-chloromethyl methyl ether at 10°C gives a 6 1 ratio of the 1,4-adduct, (F)4-chloro-l-methoxy-2-methyl-2-butene, to the 1,2-adduct, 2-chloro-l-methoxy-2-methyl-3-butene. Other a-chloroalkyl ethers react in a similar manner to give predominately the 1,4-addition product. A wide variety of aHyUc chlorides and bromides and a-chloroethers and esters add primarily 1,4- to isoprene in the presence of acid catalysts (8). 

---