Window browser

Click Next, and a file browser window will open that allows for the drill-down and selection of the Microsoft Excel file of interest. Once the file is selected, a Select Table window will open. This window allows you to pick which worksheet in the Excel file you want to turn into a SAS data set. Click the Options button to see the new options available with SAS 9.1 and PROC IMPORT. 

After you pick your data set, click Next, and a file browser window pops up that allows you to select the Microsoft Excel version you want. Here we select an Excel 2002 file. 

This link is to a text file that contains this model. When you select this link with the Microsoft Internet Explorer, the text file is displayed in the browser window ... 

I would like a model in the MAX 402 family of op-amps. Select link MAX402.FAM. The text for models in this family will be displayed in the browser window ... 

Now components, physical properties, and feedstream conditions must be specified. Select Data and Setup on the toolbar at the top of the window. The window shown in Figure 2.34 opens. Almost all aspects of the simulation can be accessed from this Data Browser window. The units to use in the simulation are specified in the Units of... 

Next the two feedstreams must be specified. Clicking the + box in front of Streams in the Data Browser window produces a list of all streams. Opening the FB stream and clicking Input opens the window shown in Figure 2.41, on which all the properties of this feedstream are specified. This procedure is repeated for stream FE as shown in Figure 2.42. 

The most important part (and the most difficult and error prone) is setting up the reactions. Click Reactions on the left column of the Data Browser window and click Reactions... 

Click the Finish button to return to the Login page, or close the browser window. 

C. Open a browser window and type IPCONFIG in the address line. 

When first uploading a new compound, it is necessary to refresh the browser window before the compound report becomes visible in Data Manager. 

The display consists of three main sections a Control Panel on the left hand side, the central browser window(s), and a horizontal toolbar at the top. Here, we describe what these three sections consist of and how to use them. 

Click on an area of the Mouse Chain track to view detailed information about the chained alignments. Note that most of the alignment information, with the exception of the Approximate score within browser window value, refers to the entire chain or gap, not just the portion displayed in the window. To view the entire chain or gap in the Mouse browser, click the Mouse position link to examine only the portion of the alignment displayed in the Human browser image, click the Open Mouse browser link. The View details of parts of chain within browser window ... 

Double-click on the FEMLAB 3.1 ECRE icon on your desktop. In the Model Navigator, select model denoted "4-Non-Isothermal Reactor 11" and press Documentation". This will open your web browser and display the documentation of this sped lie model. You can also review the detailed documentation for the whole scries of models listed on the left-hand side in the web browser window. Use chapter 2 in the online documentation to answ cr the questions below using the model 4-Non-Isothermai Reactor 11". Select the Model Navigator and press "OK" to open the model,... 

URL (Uniform Resource Locator). The system used for specifying addresses on the Internet. Each individual file or page has its own URL, which is located on the address bar at the top of your Internet browser window. Be sure to type the information in a URL carefully so your browser knows where to go. 

On the top menu bar select batch and setup information. This will open a browser window (may take a few seconds) with the total amount of nucleotides (which should be doubled for the capillary dispensing tips), enzyme and reagents needed for the entire batch. 

While the Mapview display is loading, a new page is shown in the browser window. If your system is not configured to handle Java properly, a helpful message will he displayed in the browser window. (Important Do not close the browser window behind Mapview. Because of an idiosyncrasy of Java s security specification, the applet caimot interact properly with GDB unless the browser window remains open.) To safely exit the Mapview display, select Exit from Mapview s File menu. 

Mapview has many useful options, which are well described in the oifline help. Some maps have more than one tier, each displaying different types of markers, such as markers positioned with varying confidence thresholds on a linkage or radiation hybrid map. It is possible to zoom in and out, highlight markers across maps, color code different tiers, display markers using different aliases, change the relative position of the displayed maps, and search for specific markers. To retrieve additional information on a marker from any of the maps, double-click on its name to perform a Simple Search (as described above). A separate browser window will then display the GDB entry for the selected marker. 

After clicking once again on the OK button the standard OPUS user interface will be displayed as depicted in Fig 2.8. It consists of three windows, the browser window, the spectrum window, and the overview. If you place the cursor on the border between these windows, you will notice the cursor changes to Hl or. This allows you to re-size the windows. 

Another way of loading a file is by dragging it from the Windows Explorer into the display window or the Browser window. Using this version of loading the background of the display icon in the Browser window becomes green. 

The design and functionality of the Browser resemble those of Windows Explorer. If you load an OPUS file, the file name, the data blocks, and the file status information become visible in the Browser window (see Fig. 3.6a). 

In the Browser window, a blue file icon of the file precedes the file name. The blue color indicates that the file has not yet been processed. Next to this box are the file name and a number, indicating the copy of the loaded file. Notice that you can load a file several times into the Browser. 

Via left-click on View you have access to a pull-down menu that is used to configure the toolbars, or to toggle the status bar or the browser window on and off (see Fig. 8.1). 

The icons are here depicted as Large Buttons in New Look. It is up to you to choose small buttons in new or old look by inactivating the appropriate boxes. The new look version shows no separation between icons in a toolbar. Furthermore, note that it is useful to mark Show Tooltips, which means, if you let the cursor rest for a while on an icon, an info text will be displayed, which describes the function of the icon. You can move bars by Drag and Drop to any point of the OPUS User Interface. Find out by yourself how the toolbars change by moving to the Spectrum Window or to the Browser Window. 

By default the OPUS user interface displays the Browser window on the left side. If you deselect the Browser command, only the spectrum window and the preview will be shown. Besides these options you can also reposition the browser... 

Additionally, in combination with the Browser pop-up window (Fig. 9.4), open it by right-clicking on the Browser window, it is possible to customize the OPUS interface. There are three commands, namely ... 

Allow Docking tags the Browser window to the spectrum window otherwise the Browser will be displayed in its own window. 

Calling up Curve Fit from the Evaluate menu, a dialog box (Fig. 11.2) appears to select the spectrum and the spectral range. On the first page, the spectrum to be fitted is selected by dragging it from the browser window into the File to Fit box. Note that the spectrum needs to be of absorbance type and baseline... 

The text of the first paragraph has been reformatted to fit into the size of the browser window. The text between the and the tags has been underlined (seen in color it appears blue). This is this particular browser s default way of indicating that this text is a hyperlink. If the browser user clicks on the hyperlink, the browser will issue an HTTP request to the server indicated in the URL referenced in the HREF attribute of the anchor tag. This will request the document indicated by the URL and the browser will eventually display it. 

The parameters for all the equipment must be specified. Clicking on Blocks on the left side of the Data Browser window produces a list of all the blocks that must be handled. Any block with a red color is not completely specified. The column is the most complex and has the most parameters to fix. Hence, we wiU start with the colmnn Cl. 

Now, we want to look at the compositions of the product streams leaving the column to see if they satisfy their desired purities. We assume that the specification of the heavy impurity in the distillate (isobutane = rC4) is 2mol% and that of the light impurity in the bottoms (propane = C3) is 1 mol%. To look at the properties of these streams, we open the Cl block in the Data Browser window and click the item Stream Results, which is at the very bottom of the list. 

To set up the Design SpecA ary function, click on Design Spec under the Cl block in the Data Browser window. The window shown in Figure 3.37a opens up. Clicking the New button opens the window shown in Figure 3.37b. Click OK and another window... 

---