Boryl Bonding

CHAPTER 4 COVALENT (x-TYPE) LIGANDS BOUND THROUGH METAL-HETEROATOM BONDS 

---

The stoichiometric insertion of terminal alkenes into the Cu-B bond of the (NHC)Cu-B(cat) complex, and the isolation and full characterisation of the p-boryl-alkyl-copper (I) complex has been reported. The alkyl complex decomposes at higher temperatures by P-H elimination to vinylboronate ester [67]. These data provide experimental evidence for a mechanism involving insertion of alkenes into Cu-boryl bonds, and establish a versatile and inexpensive catalytic system of wide scope for the diboration of alkenes and alkynes based on copper. 

Insertion into metal boryl bonds is represented by two examples described for a late and an early transition metal complexes. Platinum diboryl complexes react with alkynes to give the diborylated alkene (Scheme 6.61, a) [191]. A titanium(II) metallocene with a coordinated ethylene reacts with borane to give, via insertion of the alkene into a M-B bond and subsequent j6-H ehmination, a complex with a coordinated vinylborane (Scheme 6.61, b) [192]. Both processes can be made catalytic. 

Rablen PR, Hartwig JF, Nolan SP. First transition metal-boryl bond energy and quantitation of large differences in sequential bond dissociation energies of boranes. J Am Chem Soc. 1994 116 4121-4122. 

Boron haUdes have also been shown to insert into B—B bonds to give initial products with the new boryl moiety in a bridge position (80). 

Synthesis, reactivity, and structure of transition metal boryl compounds, derivatives of B,N- and B,0-heterocycles with B—M bond 98CRV2685. 

The formation of boron-group IB bonds succeeds in two ways by transfer of a boryl group from metal-boron compounds to other metals, and by reaction of anionic boranes or carboranes with transition-metal halides. 

The proposed mechanism for Fe-catalyzed 1,4-hydroboration is shown in Scheme 28. The FeCl2 is initially reduced by magnesium and then the 1,3-diene coordinates to the iron center (I II). The oxidative addition of the B-D bond of pinacolborane-tfi to II yields the iron hydride complex III. This species III undergoes a migratory insertion of the coordinated 1,3-diene into either the Fe-B bond to produce 7i-allyl hydride complex IV or the Fe-D bond to produce 7i-allyl boryl complex V. The ti-c rearrangement takes place (IV VI, V VII). Subsequently, reductive elimination to give the C-D bond from VI or to give the C-B bond from VII yields the deuterated hydroboration product and reinstalls an intermediate II to complete the catalytic cycle. However, up to date it has not been possible to confirm which pathway is correct. 

The complexes [Cu(NHC)(MeCN)][BF ], NHC = IPr, SIPr, IMes, catalyse the diboration of styrene with (Bcat) in high conversions (5 mol%, THF, rt or reflux). The (BcaO /styrene ratio has also an important effect on chemoselectivity (mono-versus di-substituted borylated species). Use of equimolecular ratios or excess of BCcat) results in the diborylated product, while higher alkene B(cat)j ratios lead selectively to mono-borylated species. Alkynes (phenylacetylene, diphenylacety-lene) are converted selectively (90-95%) to the c/x-di-borylated products under the same conditions. The mechanism of the reaction possibly involves a-bond metathetical reactions, but no oxidative addition at the copper. This mechanistic model was supported by DFT calculations [68]. 

The enantioselective P-borylation of a,P-unsaturated esters with (Bpin) was studied in the presence of various [CuCl(NHC)] or [Cu(MeCN)(NHC)] (NHC = chiral imidazol-2-ylidene or imidazolidin-2-ylidene) complexes. The reaction proceeds by heterolytic cleavage of the B-B bond of the (Bpin), followed by formation of Cu-boryl complexes which insert across the C=C bond of the unsaturated ester. Best yields and ee were observed with complex 144, featuring a non-C2 symmetric NHC ligand (Scheme 2.31) [114]. 

One most important observation for the mechanistic discussion is the oxidative addition/insertion/reductive elimination processes of the iridium complex (31) (Scheme 1-10) [62]. The oxidative addition of catecholborane yields an octahedral iridium-boryl complex (32) which allows the anti-Markovnikov insertion of alkyne into the H-Ir bond giving a l-alkenyliridium(III) intermediate (34). The electron-... 

A catalytic cycle proposed for the metal-phosphine complexes involves the oxidative addition of borane to a low-valent metal yielding a boryl complex (35), the coordination of alkene to the vacant orbital of the metal or by displacing a phosphine ligand (35 —> 36) leads to the insertion of the double bond into the M-H bond (36 —> 37) and finally the reductive elimination to afford a hydroboration product (Scheme 1-11) [1]. A variety of transition metal-boryl complexes have been synthesized via oxidative addition of the B-H bond to low-valent metals to investigate their role in cat-... 

The palladium-catalyzed stannylboration (90) [124] or silylboration (87) [109, 114] succeeds in the intramolecular carbocyclization of diynes and enynes (Scheme 1-27). It is interesting that a very strained four-membered cycUzation of hexa-l,5-diyne proceeds without any difficulties, similarly to five- or six-membered cycUzation. The boryl group is selectively introduced into the more reactive C=CH rather than C=C for enynes and into the terminal C=CH rather than the internal C=CR for diynes, again suggesting a mechanism proceeding through the first insertion into the Pd-B bond in preference to the Pd-Sn or Pd-Si bond. 

Thus, the initial result of the stoichiometric boiylation of arenes was discovered serendipitously. However, the development of this initial observation into the catalytic borylation of alkane C-H bonds was largely based on the design of complexes for the stoichiometric functionalization of alkanes and then the catalytic functionalization of alkanes. 

In contrast to the borylation of alkane C-H bonds, the coupling of aryl halides with amines was based on a literature precedent from another group published about a decade before our initial studies. Kosugi, Kameyama and Migita published the coupling of aryl halides with tin amides." Mechanistic studies we conducted on this process led us to the perhaps obvious realization that the reaction" could be conducted with amines and a silylamide base instead of tin amides (equation 4)." Surveys of bases with similar p a values led Janis Louie to conduct reactions with alkoxide bases. Similar studies were conducted at nearly the same time by Steve Buchwald and coworkers."... 

The third method that we have used to prepare these diazaboracyclohexane systems is the transamination reaction of 1,3-diaminopropane with the bis(dimethyiamino)boryl compound 8 (eq 8). The solid products 12 and 13, which contain, respectively, two or three of the BN2C3 heterocycles linked by B-N bonds, could not be distilled (or crystallized), but they were thermally stable to at least 200°C. After minor impurities were removed from 12 by vacuum distillation and from 13 by washing with hexane, the structures were confirmed by1H, 13C, and 11B NMR spectroscopy. 

We have reported that the reaction of 2,4,6-tri(chloro)borazine CI3B3N3H3 with three equivalents of tris(isopropylamino)borane B(NHPr )3 led to the formation of 2,4,6-tri[bis(isopropylamino)boryl(isopropyl)amino]borazine 11 [Fig. 5(a)] in quantitative yield.26,27 The subsequent polycondensation carried out in vacuo up to 150°C, led to the formation of the polymer 12 containing B3N3 rings linked either through direct B—N interring bonds (minor pathway) or three-atoms —N—B—N— bridges... 

Table 1.4 Examples of functionalization and defunctionalization with metal NPs in ILs carbonylation, hydroformylation, borylation, hydrosilylation, bond cleavage, hydrogenolysis, aminolysis, and dehalogenation. 

Formal hydration of the double bond appeared by the hydroboration-oxidation sequence. Desymmetrization reactions with catalytic asymmetric hydroboration are not restricted to norbornene or nonfunctionalized substrates and can be successfully applied to meso bicyclic hydrazines. In the case of 157, hydroxy derivative 158 is formed with only moderate enantioselectivity both using Rh or Ir precatalysts. Interestingly, a reversal of enantioselectivity is observed for the catalytic desymmetrization reaction by exchanging these two transition metals. Rh-catalyzed hydroboration involves a metal-H insertion, and a boryl migration is involved when using an Ir precatalyst (Equation 17) <2002JA12098, 2002JOC3522>. 

Reaction of alkenes with boryl and silyl groups c/r-located at the C=C bond with alcohols is known to proceed in two different ways <1973S309, 1986JOM(310)151> by protolytic cleavage of the B-C bond and by complexation... 

---