Bifunctional catalysis oxidation

For Se and Te, oxidation of the adatom takes place at potentials higher than that of CO oxidation. The adatom is always in its reduced state, and no bifunctional catalysis through the transfer of oxygen from the adatom to the CO molecule can take place. 

Once the multi-step reaction sequence is properly chosen, the bifunctional catalytic system has to be defined and prepared. The most widely diffused heterogeneous bifunctional catalysts are obtained by associating redox sites with acid-base sites. However, in some cases, a unique site may catalyse both redox and acid successive reaction steps. It is worth noting that the number of examples of bifunctional catalysis carried out on microporous or mesoporous molecular sieves is not so large in the open and patent literature. Indeed, whenever it is possible and mainly in industrial patents, amorphous porous inorganic oxides (e.g. j -AEOi, SiC>2 gels or mixed oxides) are preferred to zeolite or zeotype materials because of their better commercial availability, their lower cost (especially with respect to ordered mesoporous materials) and their better accessibility to bulky reactant fine chemicals (especially when zeolitic materials are used). Nevertheless, in some cases, as it will be shown, the use of ordered and well-structured molecular sieves leads to unique performances. 

POMs are promising catalysts for acid, redox and bifunctional catalysis. In many structures, the transition metal addenda atoms such as Mo or W exist in two oxidation states, which results in different redox properties as determined by polarog-raphy. The exceptional ability of heteropolyanions to act as electron reservoirs has been demonstrated by the preparation and characterization of numerous reduced derivatives [32]. They also exhibit high solubility in polar solvents, which means that they can be used in homogeneous catalysis. The wide range of applications of heteropoly compounds are based on their unique properties which include size, mass, electron and proton transfer (and hence storage) abilities, thermal stability. 

Because TS-1 is also a catalyst for oxidation reactions it can be used for liquid-phase bifunctional catalysis of the oxidation of styrene to styrene oxides with H2O2, then in situ rearrangement of the styrene oxides to phenylacetaldehydes... 

Isomorphous substitution of T element in a molecular sieve material is very interesting in order to modify its acidic or redox catalytic and shape selective properties. Different ways to perform such a substitution are now well established either during synthesis or post synthesis in( luding solid-solid reaction between the zeolite and another oxide. The substituted eliiment may be strongly or weakly bound to the framework i.e. may remain stable or may give rise to well dispersed metallic oxide particles entrapped in the cavities. This results in different catalytic properties and may even lead to bifunctional catalysis as for Ga-ZSM-5 material. 

ZrOa and Th02 show similar catali ic behaviors. Although their basic properties are not so strong, they possess weakly acidic properties, and, therefore, show the acid-base bifunctional catalysis. ZrOa and Th02 as well as rare earth oxides showed dehydration activity for alcohols. 

The chemical reactivity of the catalyst support may make important contributions to the catalytic chemistry of the material. We noted earlier that the catalyst support contains acidic and basic hydroxyls. The chemical nature of these hydroxyls will be described in detail in Chapter 5. Whereas the number of basic hydroxyls dominates in alumina, the few highly acidic hydroxyl groups also present on the alumina surface can also dramatically affect catalytic reactions. An example is the selective oxidation of ethylene catalyzed by silver supported by alumina. The epoxide, which is produced by the catalytic reaction of oxygen and ethylene over Ag, can be isomerized to acetaldehyde via the acidic protons present on the surface of the alumina support. The acetaldehyde can then be rapidly oxidized over Ag to COg and H2O. This total combustion reaction system is an example of bifunctional catalysis. This example provides an opportunity to describe the role of promoting compounds added in small amounts to a catalyst to enhance its selectivity or activity by altering the properties of the catalyst support. To suppress the total combustion reaction of ethylene, alkali metal ions such as Cs+ or K+ are typically added to the catalyst support. The alkali metal ions can exchange with the acidic support protons, thus suppressing the isomerization reaction of epoxide to acetaldehyde. This decreases the total combustion and improves the overall catalytic selectivity. 

Complexes bearing protic NHC ligands are accessible by various synthetic routes such as the deprotonation of azoles followed by reaction with a transition metal complex, the template-controlled cyclization of functionalized isocyanides, and the oxidative addition of different azoles to transition metal complexes. The complexes with simple monodentate NR,NH-NHCs often tend to tautomerize to give the N-bound azoles. This type of tautomerization is prevented in complexes with donor-functionalized NR,NH-NHCs. Recent smdies demonstrate that complexes with protic NHCs obtained from C2-H azoles are formed by an oxidative addition/reductive elimination reaction sequence. The N—H group in complexes with protic NR,NH-NHCs can serve as a hydrogen bond donor and thus as a molecular recognition unit and may enable various types of bifunctional catalysis. Recent smdies indicate that even biomolecules such as caffeine can be C8-metallated. It... 

A well-known cooperation effect is due to bifunctional catalysis in catalytic reforming, both Pt and alumina carry out part of the catalytic work. Several other types of cooperation have been mentioned in the last years, e.g. between catalysts within zeolitic structures and another component (1-3) or between separate oxide phases in oxidation or related reactions (4-12). Explanations for these cooperations often rest on spill over processes (13-15). 

Shibasaki has described the use of bifunctional catalysis in asymmetric Strecker reactions, using BlNOL-derived Lewis acid-Lewis base catalyst 160 (Equation 24) [114]. The aluminum complex had previously been shown to catalyze enantioselective cyanohydrin formation (Chapter 2, Section 2.9) [115]. In the proposed catalytic cycle, the imine is activated by the Lewis acidic aluminum while TMSCN undergoes activation by association of the silyl group with the Lewis basic phosphine oxide. Interestingly, the addition of phenol as a putative proton source was beneficial in facilitating catalyst turnover. The nature of the amine employed for the formation of the N-substituted aldimine proved to be vital for enantioselectivity, with optimal results obtained for N-fluorenyl imines such as 159, derived from aliphatic, unsaturated, and aromatic aldehydes (70-96% ee) [114],... 

Metal oxides possess multiple functional properties, such as acid-base, redox, electron transfer and transport, chemisorption by a and 71-bonding of hydrocarbons, O-insertion and H-abstract, etc. which make them very suitable in heterogeneous catalysis, particularly in allowing multistep transformations of hydrocarbons1-8 and other catalytic applications (NO, conversion, for example9,10). They are also widely used as supports for other active components (metal particles or other metal oxides), but it is known that they do not act often as a simple supports. Rather, they participate as co-catalysts in the reaction mechanism (in bifunctional catalysts, for example).11,12... 

That products of intermediate oxidation level can be detected in the photocatalytic reactions of hydrocarbons and fossil fuels is also consistent with a surface bound radical intermediate . Photocatalytic isotope exchange between cyclopentane and deuterium on bifunctional platinum/titanium dioxide catalysts indicates the importance of weakly adsorbed pentane at oxide sites. The platinum serves to attract free electrons, decreasing the efficiency of electron-hole recombination, and to regenerate the surface oxide after exchange. Much better control of the exchange is afforded with photoelectrochemical than thermal catalysis > ) As before, hydrocarbon oxidations can also be conducted at the gas-solid interface... 

Although a discussion of the nature of active sites should, in fact, include all aspects of catalysis, attention will be focussed here on two aspects which receive considerable attention in the literature the acidity or electron affinity of surface sites and the possible participation of different sites in one oxidation process, i.e. the bifunctional action of a catalyst. 

---