Atomic radius metal elements

Metallic Atomic radius number Element q>m) Atomic (g) config. Effective ionic radius Oxidation states... 

Figure 11.2 The metallic radius gives us a measure of the size of the atoms of metallic elements.

The data in Table 7.1 show that, as expected, density, ionic radius, and atomic radius increase with increasing atomic number. However, we should also note the marked differences in m.p. and liquid range of boron compared with the other Group III elements here we have the first indication of the very large difference in properties between boron and the other elements in the group. Boron is in fact a non-metal, whilst the remaining elements are metals with closely related properties. 

The atom radius of an element is the shortest distance between like atoms. It is the distance of the centers of the atoms from one another in metallic crystals and for these materials the atom radius is often called the metal radius. Except for the lanthanides (CN = 6), CN = 12 for the elements. The atom radii listed in Table 4.6 are taken mostly from A. Kelly and G. W. Groves, Crystallography and Crystal Defects, Addison-Wesley, Reading, Mass., 1970. 

The most common oxidation state of niobium is +5, although many anhydrous compounds have been made with lower oxidation states, notably +4 and +3, and Nb can be reduced in aqueous solution to Nb by zinc. The aqueous chemistry primarily involves halo- and organic acid anionic complexes. Virtually no cationic chemistry exists because of the irreversible hydrolysis of the cation in dilute solutions. Metal—metal bonding is common. Extensive polymeric anions form. Niobium resembles tantalum and titanium in its chemistry, and separation from these elements is difficult. In the soHd state, niobium has the same atomic radius as tantalum and essentially the same ionic radius as well, ie, Nb Ta = 68 pm. This is the same size as Ti ... 

The atomic radius of silver (144 pm) is within about 15% of many elements, permitting sofid solutions with Al, Au, Be, Bi, Cu, Cd, Ge, In, Mn, Pb, Pd, Pt, Sb, Sn, Th, and Zn. These metals form useful braziag, jewelry, and soldering alloys. Copper is the only metal with which silver forms a simple eutectic between two sofid solutions (Pig. 3). Silver has extremely limited solubiUtyia B, C, Co, Cr, Pe, Ge, Ir, Ni, Mg, Mo, Se, Si, Te, Ti, and W. Thus these metals may be brazed by silver alloys without serious erosion during welding (qv). 

Some metals are soluble as atomic species in molten silicates, the most quantitative studies having been made with Ca0-Si02-Al203(37, 26, 27 mole per cent respectively). The results at 1800 K gave solubilities of 0.055, 0.16, 0.001 and 0.101 for the pure metals Cu, Ag, Au and Pb. When these metal solubilities were compared for metal alloys which produced 1 mm Hg pressure of each of these elements at this temperature, it was found drat the solubility decreases as the atomic radius increases, i.e. when die difference in vapour pressure of die pure metals is removed by alloy formation. If the solution was subjected to a temperature cycle of about 20 K around the control temperamre, the copper solution precipitated copper particles which grew with time. Thus the liquid metal drops, once precipitated, remained stable thereafter. 

Atomic radii. The radii are determined by assuming that atoms in closest contact in an element touch one another. The atomic radius is taken to be one half of the closest internuclear distance, (a) Arrangement of copper atoms in metallic copper, giving an atomic radius of 0.128 nm for copper, (b) Chlorine atoms in a chlorine (Cl2) molecule, giving an atomic radius of 0.099 nm for chlorine. 

Steel is an alloy of about 2% or less carbon in iron. Carbon atoms are much smaller than iron atoms, and so they cannot substitute for iron in the crystal lattice. Indeed, they are so small that they can fit into the interstices (the holes) in the iron lattice. The resulting material is called an interstitial alloy (Fig. 5.48). For two elements to form an interstitial alloy, the atomic radius of the solute element must be less than about 60% of the atomic radius of the host metal. The interstitial atoms interfere with electrical conductivity and with the movement of the atoms forming the lattice. This restricted motion makes the alloy harder and stronger than the pure host metal would be. 

Alloys of metals tend to be stronger and have lower electrical conductivity than pure metals. In substitutional alloys, atoms of the solute metal take the place of some atoms of a metal of similar atomic radius. In interstitial alloys, atoms of the solute element fit into the interstices in a lattice formed by atoms of a metal with a larger atomic radius. 

Symbol Be atomic number 4 atomic weight 9.012 a Group IIA (Group 2) metal the lightest alkaline-earth metallic element atomic radius l.OOA ionic radius (Be2+) 0.30A electronic configuration Is22s2 ionization potential, Be 9.32eV, Be + 18.21 eV oxidation state +2... 

Symbol Cs atomic number 55 atomic weight 132.905 a Group lA (Group 1) alkali metal element electron configuration [Xe]6si atomic radius 2.65 A ionic radius (Cs ) 1.84 A ionization potential 3.89 eV valence +1 natural isotope Cs-133 37 artificial isotopes ranging in mass numbers from 112 to 148 and half-lives 17 microseconds (Cs-113) to 2.3x10 years (Cs-135). 

Symbol Hf atomic number 72 atomic weight 178.49 a Group IV B (Group 4) transition metal element atomic radius 1.442A electron configuration [Xe]4/i45d26s2 common valence +4, also exhibits oxidation states +2 and -i-3 most abundant natural isotope Hf-180 isotopes and their natural abundances Hf-176 (5.21%), Hf-177 (18.56%), Hf-178 (27.10%), Hf-179 (13.75%), Hf-180 (35.22%), artificial isotopes 157, 158, 168, 173, 175, 181-183. 

Symbol Fe atomic number 26 atomic weight 55.847 a Group VIII (Group 8) metallic element transition metal atomic radius 1.24A electron configuration [Ar]3d 4s2 most common valence states +2 and -i-3 other oxidization states -1, 0, -1-1, +4 and -i-6 are known but rare most abundant isotope Fe-56 natural isotopes and their abundances Fe-54 (5.90%), Fe-56 (91.52%), Fe-57 (2.245%), Fe-58 (0.33%). 

Symbol La atomic number 57 atomic weight 138.91 a rare-earth transition metal, precursor to a series of 14 inner-transition elements known as the lanthanide series electron configuration [XejSdiGs oxidation state -i-3 atomic radius 1.879A ionic radius (LaS+) 1.061A electronegativity 1.17 two natural isotopes are La-139 (99.911%) and La-138 (0.089%). 

Symbol Lu atomic number 71 atomic weight 174.97 a lanthanide series element an /-block inner-transition metal electron configuration [Xe]4/i45di6s2 valence -1-3 atomic radius (coordination number 12) 1.7349A ionic radius (Lu3+) 0.85A two naturally-occurring isotopes Lu-176 (97.1%) and Lu-175(2.59%) Lu-172 is radioactive with a half-life of 4xl0i° years (beta-emission) several artificial isotopes known, that have mass numbers 155, 156, 167—174, 177—180. 

---