Arylation carboxylic acid additives

In addition to aryl carboxylic acids, including profens (2-aryl propionic acid NS AIDs) (see Fig. 9.36) [393,398], the terguride-based CSP has shown the potential to re.solve the enantiomers of 2-aryloxypropionic acids [394] and of A-dansyl, A-3,5-dinitrobenzoyl, A-benzoyl, A-P-naphthoyl amino acid derivatives [395]. 

Scheme 4.12 Copper-catalyzed arylations of aryl boronic acids using carboxylic acid additives.

As carboxylic acid additives increased the efficiency of palladium catalysts in direct arylations through a cooperative deprotonation/metallation mechanism (see Chapter 11) [45], their application to ruthenium catalysis was tested. Thus, it was found that a ruthenium complex modified with carboxylic acid MesC02H (96) displayed a broad scope and allowed for the efficient directed arylation of triazoles, pyridines, pyrazoles or oxazolines [44, 46). With respect to the electrophile, aryl bromides, chlorides and tosylates, including ortho-substituted derivatives, were found to be viable substrates. It should be noted here that these direct arylations could be performed at a lower reaction temperatures of 80 °C (Scheme 9.34). 

In a handful of cases, two CCXIH groups have been activated for the synthesis of biaryls. Larrosa and coworkers reported for the first time the decarboxylative homocoupling of aromatic acids mediated by Pd and Ag [62a]. The reaction makes use of Pd(TFA)j as a catalyst and Ag CO as an additive to afford the desired biaryls in 76-95% yields. The only by-products observed were due to the proto-decarboxylation of the aryl carboxylic acid. Both metals are essential for the reaction, and the role of the Ag salt is not only as the terminal oxidant but also as a mediator of the decarboxylation process. The method is subject to some limitations on the substituents on the benzoic acids. Thus, m- and p-nitrobenzoic acids as well as benzoic acids ortho substituted with F, Br, or MeO failed to give decarboxylative homocoupling products. In all cases, protodecarboxylations to the corresponding arenes were the main products observed. The same problem was reported in the protocol developed by Deng and coworkers, where the best results were obtained with PdCl and PPhj in the presence of Ag COj [62b]. 

Addition ofDPPA to Enamines to Yield a-aryl-carboxylic Acids... 

Coupling Reactions. Palladium pivalate is an effective catalyst for mild and efficient direct arylation reactions. One account described the intramolecular arylation phenolic ethers (eq 1). Initial optimization with Pd(OAc)2 in conjunction with electron-deficient phosphines led to the desired biphenyl in low yield. Upon the addition of carboxylic acid additives, the yield improved markedly with the optimal additive being pivalic acid. Indeed it was determined that the additive was not needed when Pd(OPiv)2 was errqtloyed as a catalyse although improved yields were observed when the title compound was used in conjunction with the acid additive. The role of the pivalate is believed to be that of a proton shuttle in a concerted metallation-deprotonation (CMD) sequence. A further advantage of using Pd(OPiv)2 was the rate enhancement of the arylation with most reactions complete in less than 6 h (vs. 12 or more hours with Pd(OAc)2). The catalyst was applied to a range of electron-rich and -deficient arenes with good to excellent yields. 

The monoarylation of aryl-triazoles with arylchlorides can be achieved with [RuCl2(p-cymene)]2 catalyst with large excess of PCya in more drastic conditions, 120-135°C for 20 h, than with carboxylic acid additive, whereas arylbromides... 

In addition to nucleophilic aromatic substitution, there are a number of other synthetic routes to poly(aryl ethers). Friedel-Crafts condensation of arylsulfonyl chlorides and aryl carboxylic acid derivatives with aryl ethers has been employed to prepare polysulfones (2b) and poly(ether ketones) (105,106), respectively. Direct polycondensation of various benzoic acids containing a phenyl ether structure has been carried in 1 10 phosphorous pentoxide/methanesulfonic acid (107). The success of this method is a consequence of the high selectivity of the electrophilic reagent for substitution para to the ether linkage. 

In addition to the steric effects shown especially by alkyl and aryl groups, the field effect of strongly polar groups must also be considered. For example, 4-hydroxypyrid-2-one-6-carboxylic acid (22)... 

There are actually three reactions called by the name Schmidt reaction, involving the addition of hydrazoic acid to carboxylic acids, aldehydes and ketones, and alcohols and alkenes. The most common is the reaction with carboxylic acids, illustrated above.Sulfuric acid is the most common catalyst, but Lewis acids have also been used. Good results are obtained for aliphatic R, especially for long chains. When R is aryl, the yields are variable, being best for sterically hindered compounds like mesi-toic acid. This method has the advantage over 18-13 and 18-14 that it is just one laboratory step from the acid to the amine, but conditions are more drastic. Under the acid conditions employed, the isocyanate is virtually never isolated. 

CHROMIUM TRIOXIDE-PYRIDINE COMPLEX, preparation in situ, 55, 84 Chrysene, 58,15, 16 fzans-Cinnamaldehyde, 57, 85 Cinnamaldehyde dimethylacetal, 57, 84 Cinnamyl alcohol, 56,105 58, 9 2-Cinnamylthio-2-thiazoline, 56, 82 Citric acid, 58,43 Citronellal, 58, 107, 112 Cleavage of methyl ethers with iodotri-methylsilane, 59, 35 Cobalt(II) acetylacetonate, 57, 13 Conjugate addition of aryl aldehydes, 59, 53 Copper (I) bromide, 58, 52, 54, 56 59,123 COPPER CATALYZED ARYLATION OF /3-DlCARBONYL COMPOUNDS, 58, 52 Copper (I) chloride, 57, 34 Copper (II) chloride, 56, 10 Copper(I) iodide, 55, 105, 123, 124 Copper(I) oxide, 59, 206 Copper(ll) oxide, 56, 10 Copper salts of carboxylic acids, 59, 127 Copper(l) thiophenoxide, 55, 123 59, 210 Copper(l) trifluoromethanesulfonate, 59, 202... 

An additional stabilization of the negative charge provided by the adjacent aryl group in aryllithiomethyl intermediates 400 makes l-(arylmethyl)benzotriazoles 399 attractive starting materials for many syntheses. Thus, reaction of anions 400 with esters of carboxylic acids leads to a-(benzotriazole-l-yl) ketones 401, which can be easily reduced to carbinols 402... 

With respect to the coupling reactions of stannylthiazoles with aryl halides, the union of 4-chlorobromobenzene and 2-tributylstannylthiazole constructed arylthiazole 53 [37]. The Stille reaction of 3-bromobenzylphosphonate (54) and 2-tributylstannylthiazole led to heterobiaryl phosphonate 55, which may be utilized as a substrate in a Wadsworth-Homer-Emmons reaction or a bioisosteric analog of a carboxylic acid [38], The phosphonate did not interfere with the reaction. In addition, the coupling of 5-bromo-2,2-dimethoxy-l,3-indandione (56) and 2-tributylstannylbenzothiazole resulted in adduct 57, which was then hydrolyzed to 5-(2 -benzothiazolyl)ninhydrin [39]. 

When the reaction with substituted benzaldehydes is conducted in the presence of ammonia, the a-amino carboxylic acids are formed [11], The corresponding reaction involving bromoform is less effective and, for optimum yields, the addition of lithium chloride, which enhances the activity of the carbonyl group, is required. In its absence, the overall yields are halved. The reaction of dichlorocarbene with ketones or aryl aldehydes in the presence of secondary amines produces a-aminoacetamides [12, 13] (see Section 7.6). 

In a slightly less convenient procedure, but one which has general versatility, carbonylation of aryl (or vinyl) palladium compounds produces aryl, heteroaryl, and vinyl carboxylic acids. As with the other procedures, immediate upon its formation, the carboxylate anion migrates to the aqueous phase. Consequently, haloaromatic acids can be obtained from dihaloarenes, without further reaction of the second halogen atom, e.g. 1,4-dibromobenzene has been carbonylated (90% conversion) to yield 4-bromobenzoic acid with a selectivity for the monocarbonylation product of 95%. Additionally, the process is economically attractive, as the organic phase containing the catalyst can be cycled with virtually no loss of activity and ca. 4000 moles of acid can be produced for each mole of the palladium complex used [4],... 

---