Aryl iodide salts

The diazonium salts 145 are another source of arylpalladium com-plexes[114]. They are the most reactive source of arylpalladium species and the reaction can be carried out at room temperature. In addition, they can be used for alkene insertion in the absence of a phosphine ligand using Pd2(dba)3 as a catalyst. This reaction consists of the indirect substitution reaction of an aromatic nitro group with an alkene. The use of diazonium salts is more convenient and synthetically useful than the use of aryl halides, because many aryl halides are prepared from diazonium salts. Diazotization of the aniline derivative 146 in aqueous solution and subsequent insertion of acrylate catalyzed by Pd(OAc)2 by the addition of MeOH are carried out as a one-pot reaction, affording the cinnamate 147 in good yield[115]. The A-nitroso-jV-arylacetamide 148 is prepared from acetanilides and used as another precursor of arylpalladium intermediate. It is more reactive than aryl iodides and bromides and reacts with alkenes at 40 °C without addition of a phosphine ligandfl 16]. 

The carbonylation of aryl iodides in the presence of alkyl iodides and Zn Cu couple affords aryl alkyl ketones via the formation of alkylzinc species from alkyl iodides followed by transmetallation and reductive elimination[380]. The Pd-catalyzed carbonylation of the diaryliodonium salts 516 under mild conditions in the presence of Zn affords ketones 517 via phenylzinc. The a-diketone 518 is formed as a byproduct[381],... 

The reaction of an aryl diazonium salt with potassium iodide is the standard method for the preparation of aryl iodides The diazonium salt is prepared from a primary aro matic amine m the usual way a solution of potassium iodide is then added and the reac tion mixture is brought to room temperature or heated to accelerate the reaction... 

Preparation of aryl iodides Aryl diazonium salts react with sodium or potassium iodide to form aryl iodides This is the most general method for the synthesis of aryl iodides... 

Reaction of aryl diazonium salts with iodide ion (Section 22 17) Adding po tassium iodide to a solution of an aryl diazonium ion leads to the formation of an aryl iodide... 

Trifluoromethylalion of aryl iodides was carried out by the fluoride ion in duced cross-coupling reaction of aromatic iodides with tnfluoromethyltnalkyl-silanes in the presence ofcopper(I) salts [219 (equation 147) Some pentafluoro- ethyl derivative was also formed This methodology was extended to pentafluoroethyl-and heptafluoropropyltriethylsilanes [2/9]... 

Aryl chlorides and bromides are prepared by reaction of an arenediazonium salt with the corresponding copper(I) halide, CuX, a process called the Sandmeyer reaction. Aryl iodides can be prepared by direct reaction with Nal without using a copper(T) salt. Yields generally fall between 60 and 80%. 

Mercuration of aromatic compounds can be accomplished with mercuric salts, most often Hg(OAc)2 ° to give ArHgOAc. This is ordinary electrophilic aromatic substitution and takes place by the arenium ion mechanism (p. 675). ° Aromatic compounds can also be converted to arylthallium bis(trifluoroacetates), ArTl(OOCCF3)2, by treatment with thallium(III) trifluoroacetate in trifluoroace-tic acid. ° These arylthallium compounds can be converted to phenols, aryl iodides or fluorides (12-28), aryl cyanides (12-31), aryl nitro compounds, or aryl esters (12-30). The mechanism of thallation appears to be complex, with electrophilic and electron-transfer mechanisms both taking place. 

Aryl sulfones have been prepared from sulfinic acid salts, aryl iodides and Cul. Unactivated thiocyanation has been accomplished with charcoal supported copper(I) thiocyanate." ... 

Thallium(III), particularly as the trifluoroacetate salt, is also a reactive electrophilic metallating species, and a variety of synthetic schemes based on arylthallium intermediates have been devised.75 Arylthallium compounds are converted to chlorides or bromides by reaction with the appropriate cupric halide.76 Reaction with potassium iodide gives aryl iodides.77 Fluorides are prepared by successive treatment with potassium fluoride and boron trifluoride.78 Procedures for converting arylthallium compounds to nitriles and phenols have also been described.79... 

Aryl diazonium ions are converted to iodides in high yield by reaction with iodide salts. This reaction is initiated by reduction of the diazonium ion by iodide. The aryl radical then abstracts iodine from either I2 or I3. A chain mechanism then proceeds... 

Entries 7 and 8 illustrate conversion of diazonium salts to phenols. Entries 9 and 10 use the traditional conditions for the Sandmeyer reaction. Entry 11 is a Sandmeyer reaction under in situ diazotization conditions, whereas Entry 12 involves halogen atom transfer from solvent. Entry 13 is an example of formation of an aryl iodide. Entries 14 and 15 are Schiemann reactions. The reaction in Entry 16 was used to introduce a chlorine substituent on vancomycin. Of several procedures investigated, the CuCl-CuCl2 catalysis of chlorine atom transfer form CC14 proved to be the best. The diazonium salt was isolated as the tetrafluoroborate after in situ diazotization. Entries 17 and 18 show procedures for introducing cyano and azido groups, respectively. 

This is essentially a chain reaction involving Cu° = Cu interconversions. Similar results have been achieved by photolysis of the aryl iodide corresponding to the diazonium salt (112). 

Palladium-catalyzed carbon-carbon cross-coupling reactions are among the best studied reactions in recent decades since their discovery [102, 127-130], These processes involve molecular Pd complexes, and also palladium salts and ligand-free approaches, where palladium(O) species act as catalytically active species [131-135]. For example, the Heck reaction with aryl iodides or bromides is promoted by a plethora of Pd(II) and Pd(0) sources [128, 130], At least in the case of ligand-free palladium sources, the involvement of soluble Pd NPs as a reservoir for catalytically active species seems very plausible [136-138], Noteworthy, it is generally accepted that the true catalyst in the reactions catalyzed by Pd(0) NPs is probably molecular zerovalent species detached from the NP surface that enter the main catalytic cycle and subsequently agglomerate as N Ps or even as bulk metal. 

Simple Pd salts and complexes which contain neither phosphines nor any other deliberately added ligands are well known to provide catalytic activity in cross-coupling reactions. Such catalytic systems (often referred to as ligand-free catalysts ) often require the use of water as a component of the reaction medium.17 In the majority of cases such systems are applicable to electrophiles easily undergoing the oxidative addition (aryl iodides and activated bromides), although there are examples of effective reactions with unactivated substrates (electron-rich aiyl bromides, and some aryl chlorides).18,470... 

Let us now consider the formation of aryl iodides from aryl diazonium salts and potassium iodide in methanol (Singh and Kumar 1972a, 1972b). Electron-donor substituents decelerate the process as compared with benzene diazonium (the substituent is hydrogen), whereas electron acceptor substituents accelerate it. Oxygen inhibits the reaction, and photoirradiation speeds it up. As the authors pointed out, in the case of 4-nitrobenzene diazonium, the reaction leads not only to 4-iodonitrobenzene but also to nitrobenzene, elemental iodine, and formaldehyde. All of these facts support the following sequence of events ... 

The similar cross-coupling reaction of compounds 1 with aryl iodides was less sensitive to the electronic nature of the substrates than that with aryl triflates i.e., electron-deficient 4 -iodoacetophenone and electron-rich 4-iodoanisole afforded the cross-coupling products in 96% and 55% yields, respectively (Scheme 29) [45]. The addition of cesium salts improved the product yields considerably. Aryl bromides were less efficient than aryl iodides, and addition of cesium salts was necessary to improve the product yields. 

Solid diazonium salts are well suited for reactions in the solid state. They rapidly react with potassium iodide when coground in an agate mortar (without sharp edges ) and give a quantitative yield of the solid aryl iodide after... 

Potassium iodide (830 mg, 5.0 mmol) was finely ground in an agate mortar and the diazonium salt 292 (0.50 mmol) added in five portions and coground for 5 min each. After a 24-h rest with occasional grinding, the diazonium band in the IR spectrum had completely disappeared. The potassium salts were removed by washing with cold water. The yield of pure aryl iodide 295 was 100% throughout (Scheme 44). 

---