Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aromatic compounds anionic

III stressed nodes Public corporation Redkino pilot plant inorganic anions, ammonia, aromatic compounds, anionic... [Pg.307]

The operation of the nitronium ion in these media was later proved conclusively. "- The rates of nitration of 2-phenylethanesulphonate anion ([Aromatic] < c. 0-5 mol l i), toluene-(U-sulphonate anion, p-nitrophenol, A(-methyl-2,4-dinitroaniline and A(-methyl-iV,2,4-trinitro-aniline in aqueous solutions of nitric acid depend on the first power of the concentration of the aromatic. The dependence on acidity of the rate of 0-exchange between nitric acid and water was measured, " and formal first-order rate constants for oxygen exchange were defined by dividing the rates of exchange by the concentration of water. Comparison of these constants with the corresponding results for the reactions of the aromatic compounds yielded the scale of relative reactivities sho-wn in table 2.1. [Pg.10]

Side-chain anionic alkylation reactions with aromatic compounds take place when cataly2ed with strong basic catalysts, like Na—K (228). The yield is 83% when o-xylene reacts with butadiene... [Pg.347]

It resembles tetracyanoethylene in that it adds reagents such as hydrogen (31), sulfurous acid (31), and tetrahydrofuran (32) to the ends of the conjugated system of carbon atoms suffers displacement of one or two cyano groups by nucleophilic reagents such as amines (33) or sodiomalononittile (34) forms TT-complexes with aromatic compounds (35) and takes an electron from iodide ion, copper, or tertiary amines to form an anion radical (35,36). The anion radical has been isolated as salts of the formula (TCNQ) where is a metal or ammonium cation, and n = 1, 1.5, or 2. Some of these salts have... [Pg.404]

In this paper the electtode anodic reactions of a number of dihydropyridine (DHP) derivatives, quantum-chemical calculations of reactions between DHP cation-radicals and electrochemiluminescers anion-radicals (aromatic compounds) and DHP indirect ECL assay were investigated. The actuality of this work and its analytical value follow from the fact that objects of investigation - DHP derivatives - have pronounced importance due to its phaiTnacology properties as high effective hypertensive medical product. [Pg.101]

Various other observations of Krapcho and Bothner-By are accommodated by the radical-anion reduction mechanism. Thus, the position of the initial equilibrium [Eq. (3g)] would be expected to be determined by the reduction potential of the metal and the oxidation potential of the aromatic compound. In spite of small differences in their reduction potentials, lithium, sodium, potassium and calcium afford sufficiently high concentrations of the radical-anion so that all four metals can effect Birch reductions. The few compounds for which comparative data are available are reduced in nearly identical yields by the four metals. However, lithium ion can coordinate strongly with the radical-anion, unlike sodium and potassium ions, and consequently equilibrium (3g) for lithium is shifted considerably... [Pg.15]

Reduction of a conjugated enone to a saturated ketone requires the addition of two electrons and two protons. As in the case of the Birch reduction of aromatic compounds, the exact order of these additions has been the subject of study and speculation. Barton proposed that two electrons add initially giving a dicarbanion of the structure (49) which then is protonated rapidly at the / -position by ammonia, forming the enolate salt (50) of the saturated ketone. Stork later suggested that the radical-anion (51), a one electron... [Pg.27]

Perfluoroalkylation of substituted benzenes and heterocyclic substrates has been accomplished through thermolysis of perfluoroalkyl iodides in the presence of the appropriate aromatic compound Isomeric mixtures are often obtained W-Methylpyrrole [143] and furan [148] yield only the a-substituted products (equation 128) Imidazoles are perfluoroalkylated under LTV irradiation [149] (equation 129). 4-Perfluoroalkylimidazoles are obtained regioselectively by SET reactions of an imidazole anion with fluoroalkyl iodides or bromides under mild conditions [150] (equation 130) (for the SET mechanism, see equation 57)... [Pg.481]

Hydrazinopyridazines such as hydralazine have a venerable history as anti hypertensive agents. It is of note that this biological activity is maintained in the face of major modifications in the heterocyclic nucleus. The key intermediate keto ester in principle can be obtained by alkylation of the anion of pi peri done 44 with ethyl bromo-acetate. The cyclic acylhydrazone formed on reaction with hydrazine (46) is then oxidized to give the aromatized compound 47. The hydroxyl group is then transformed to chloro by treatment with phosphorus oxychloride (48). Displacement of halogen with hydrazine leads to the formation of endralazine (49). ... [Pg.232]

A. Radical Anions of Sulfoxide- and Sulfone-containing Aromatic Compounds... [Pg.1050]

A number of radical anions of sulfur-containing aromatic compounds have been studied essentially by means of ESR spectroscopy and sometimes by electronic spectroscopy. The studied compounds include aromatic rings separated by the oxidized sulfur functionality. The effects caused by the latter depend on the geometry and topology of the aromatic systems as well as on the electron-withdrawing ability of the other substituents. [Pg.1050]

First reported by Fredenhagen in 1926 F3, F4), the graphite-alkali-metal compounds possess a relative simplicity with respect to other intercalation compounds. To the physicist, their uncomplicated structure and well defined stoichiometry permit reasonable band-structure calculations to be made S2,12) to the chemist, their identity as solid, "infinite radical-anions frequently allows their useful chemical substitution for such homogeneous, molecular-basis reductants as alkali metal-amines and aromatic radical anions N2, B5). [Pg.285]

A number of synthetic procedures are available (Ai2). (2) For precisely defined stoichiometries, the isobaric, two-bulb method of Herold is preferred H5, H6, H2). (2) To generate compounds suitable for organic synthesis work, graphite and alkali metal may be directly combined, and heated under inert gas (Pl, lA). (5) Electrolysis of fused melts has been reported to be effective iN2). 4) Although alkali metal -amine solutions will react with graphite, solvent molecules co-inter-calate with the alkali metal. Utilization of alkali metal-aromatic radical anion solutions suffers the same problem. [Pg.285]

Polymerization of triphenylmethyl methacrylate in the presence of a chiral anion catalyst results in a polymer with a helical structure that can be coated onto macroporous silica [742,804). Enantioselectivity in this case results from insertion and fitting of the analyte into the helical cavity. Aromatic compounds and molecules with a rigid nonplanar structure are often well resolved on this phase. The triphenylmethyl methacrylate polymers are normally used with eluents containing methanol or mixtures of hexane and 2-propanol. The polymers are soluble in aromatic hydrocarbons, chlorinated hydrocarbons and tetrahydrofuran which, therefore, are not suitable eluents. [Pg.461]

Palu, M. and Samuelson, O., Influence of aromatic compounds in sugar chromatography on anion-exchange resins, Talanta, 24, 264, 1977. [Pg.282]

In the area of ion sensing, cation recognition by electrodes containing functionalized redox-active polymers has been an area of considerable interest. Fabre and co-workers have reported the development of a boronate-functionalized polypyrrole as a fluoride anion-responsive electroactive polymer film. The electropolymerizable polypyrrole precursor (11) (Fig. 11) was synthesized by the hydroboration reaction of l-(phenylsulfonyl)-3-vinylpyrrole with diisopinocampheylborane followed by treatment with pinacol and the deprotection of the pyrrole ring.33 The same methodology was utilized for the production of several electropolymerizable aromatic compounds (of pyrrole (12) (Fig. 11), thiophene (13 and 14) (Fig. 11), and aniline) bearing boronic acid and boronate substituents as precursors of fluoride- and/or chloride-responsive conjugated polymer.34... [Pg.27]


See other pages where Aromatic compounds anionic is mentioned: [Pg.236]    [Pg.98]    [Pg.331]    [Pg.150]    [Pg.2]    [Pg.481]    [Pg.16]    [Pg.293]    [Pg.164]    [Pg.77]    [Pg.531]    [Pg.32]    [Pg.627]    [Pg.767]    [Pg.137]    [Pg.88]    [Pg.374]   
See also in sourсe #XX -- [ Pg.125 ]




SEARCH



Anions, aromatic

Aromaticity anions

Complex Formation of Anionic Surfactants with Aromatic Compounds

Compounds anionic

© 2024 chempedia.info