Aqueous solutions redox reactions

Steenken, S. (1989). Purine bases, nucleosides and nucleotides aqueous solution redox chemistry and transformation reactions of their radical cations and e" and OH adducts. Chem. Rev. 89, 503-520. 

Table 14.3 Standard Reduction Potentials and Average Standard Free Energies of Reaction (per Electron Transferred) at 25°C of Some Organic Redox Couples in Aqueous Solution (The reactions are ordered in decreasing EH(W) values.)0...

Steenken S (1988) Electron transfer between radicals and organic molecules via addition/elimina-tion. An inner-sphere path. In Rice-Evans C, Dormandy T (eds) Free radicals chemistry, pathology and medicine. Richelieu Press, London, pp 53-71 Steenken S (1989) Purine bases, nucleosides and nucleotides Aqueous solution redox chemistry and transformation reactions of their radical cations e and OH adducts. Chem Rev 89 503-520 Steenken S (1992) Electron-transfer-induced acidity/basicity and reactivity changes of purine and pyrimidine bases. Consequences of redox processes for DNA base pairs. Free Radical Res Commun 16 349-379... 

Many of the reactions of halogens can be considered as either oxidation or displacement reactions the redox potentials (Table 11.2) give a clear indication of their relative oxidising power in aqueous solution. Fluorine, chlorine and bromine have the ability to displace hydrogen from hydrocarbons, but in addition each halogen is able to displace other elements which are less electronegative than itself. Thus fluorine can displace all the other halogens from both ionic and covalent compounds, for example... 

The acids are only known in aqueous solution all are oxidising agents the standard redox potentials for the reaction... 

Formation of acetaldehyde and metallic Pd by passing ethylene into an aqueous solution of PdCl2 was reported by Phillips in 1894 15] and used for the quantitative analysis of Pd(II)[16], The reaction was highlighted after the industrial process for acetaldehyde production from ethylene based on this reaetion had been developed[l,17,18]. The Wacker process (or reaction) involves the three unit reactions shown. The unique feature in the Wacker process is the invention of the in situ redox system of PdCl2-CuCl2. 

Chemical, or abiotic, transformations are an important fate of many pesticides. Such transformations are ubiquitous, occurring in either aqueous solution or sorbed to surfaces. Rates can vary dramatically depending on the reaction mechanism, chemical stmcture, and relative concentrations of such catalysts as protons, hydroxyl ions, transition metals, and clay particles. Chemical transformations can be genetically classified as hydrolytic, photolytic, or redox reactions (transfer of electrons). 

Stannous Sulfate. Stannous sulfate (tin(Il) sulfate), mol wt 214.75, SnSO, is a white crystalline powder which decomposes above 360°C. Because of internal redox reactions and a residue of acid moisture, the commercial product tends to discolor and degrade at ca 60°C. It is soluble in concentrated sulfuric acid and in water (330 g/L at 25°C). The solubihty in sulfuric acid solutions decreases as the concentration of free sulfuric acid increases. Stannous sulfate can be prepared from the reaction of excess sulfuric acid (specific gravity 1.53) and granulated tin for several days at 100°C until the reaction has ceased. Stannous sulfate is extracted with water and the aqueous solution evaporates in vacuo. Methanol is used to remove excess acid. It is also prepared by reaction of stannous oxide and sulfuric acid and by the direct electrolysis of high grade tin metal in sulfuric acid solutions of moderate strength in cells with anion-exchange membranes (36). 

A comprehensive list of standard potentials is found in Ref. 7. Table 2-3 gives a few values for redox reactions. Since most metal ions react with OH ions to form solid corrosion products giving protective surface films, it is appropriate to represent the corrosion behavior of metals in aqueous solutions in terms of pH and Ufj. Figure 2-2 shows a Pourbaix diagram for the system Fe/HjO. The boundary lines correspond to the equilibria ... 

The aqueous solution chemistiy of nitrous acid and nitrites has been extensively studied. Some reduction potentials involving these species are given in Table 11.4 (p. 434) and these form a useful summaiy of their redox reactions. Nitrites are quantitatively oxidized to nitrate by permanganate and this reaction is used in titrimetric analysis. Nitrites (and HNO2) are readily reduced to NO and N2O with SO2, to H2N2O2 with Sn(II), and to NH3 with H2S. Hydrazinium salts yield azides (p. 432) which can then react with further HNO2 ... 

Organic peroxide-aromatic tertiary amine system is a well-known organic redox system 1]. The typical examples are benzoyl peroxide(BPO)-N,N-dimethylani-line(DMA) and BPO-DMT(N,N-dimethyl-p-toluidine) systems. The binary initiation system has been used in vinyl polymerization in dental acrylic resins and composite resins [2] and in bone cement [3]. Many papers have reported the initiation reaction of these systems for several decades, but the initiation mechanism is still not unified and in controversy [4,5]. Another kind of organic redox system consists of organic hydroperoxide and an aromatic tertiary amine system such as cumene hydroperoxide(CHP)-DMT is used in anaerobic adhesives [6]. Much less attention has been paid to this redox system and its initiation mechanism. A water-soluble peroxide such as persulfate and amine systems have been used in industrial aqueous solution and emulsion polymerization [7-10], yet the initiation mechanism has not been proposed in detail until recently [5]. In order to clarify the structural effect of peroxides and amines including functional monomers containing an amino group, a polymerizable amine, on the redox-initiated polymerization of vinyl monomers and its initiation mechanism, a series of studies have been carried out in our laboratory. 

It is usual to choose a container metal for fused salts sufficiently noble for the displacement reaction (2.16) to be negligible, and the most important aspects of corrosion are, as in aqueous solutions, those which involve reducible impurities, although in a salt melt there is also the additional possibility of a reducible anion (see above). All such factors can be described as controlling the oxidising power of the melt, which can be defined in terms of a redox potential just as in aqueous solutions The redox potential is expressed by relationships of the form... 

Another common type of reaction in aqueous solution involves a transfer of electrons between two species. Such a reaction is called an oxidation-reduction or redox reaction. Many familiar reactions fit into this category, including the reaction of metals with acid. 

---