Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aqueous conditions oxidation

Although CY-diketones are only rarely isolated from aqueous permanganate oxidations there is conclusive proof that they are intermediates in the reaction (16). Of-Diketones are resistant to further oxidation under anhydrous conditions and can thus be isolated in good yields from the phase transfer assisted reactions. Howeverf under aqueous conditions oxidative cleavage takes place rapidly, thus preventing the accumulation of these products. [Pg.86]

The regeneration of carbonyl compounds from 1,3-dithianes can be achieved using potassium hydrogen persulfate, Oxone , supported on wet alumina <96SL767> and by periodic acid under non-aqueous conditions <96TL4331>. The deprotection of benzyl substituted 1,3-dithianes can be achieved using the one electron oxidant [Fe(phen)3](PF6)3 <96SL315>. [Pg.309]

Under aqueous conditions, flavonoids and their glycosides will also reduce oxidants other than peroxyl radicals and may have a role in protecting membranal systems against pro-oxidants such as metal ions and activated oxygen species in the aqueous phase. Rate constants for reduction of superoxide anion show flavonoids to be more efficient than the water-soluble vitamin E analogue trolox (Jovanovic et al, 1994), see Table 16.1. [Pg.321]

The viabiUty of using site-isolated Ta(V) centers for cyclohexene epoxi-dation was explored by grafting ( PrO)2Ta[OSi(O Bu)3]3 onto a mesoporous silica material [83]. After calcinations, the material formed is less active and selective in the oxidation of cyclohexene than the surface-supported Ti(IV) catalysts using organic peroxides however, the site-isolated Ta(V) catalysts are more active under aqueous conditions. [Pg.108]

The oxidative cleavage of C=C bond is a common type of reaction encountered in organic synthesis and has played a historical role in the structural elucidation of organic compounds. There are two main conventional methods to oxidatively cleave a C=C bond (1) via ozonol-ysis and (2) via oxidation with high-valent transition-metal oxidizing reagents. A more recent method developed is via the osmium oxide catalyzed periodate oxidative cleavage of alkenes. All these methods can occur under aqueous conditions. [Pg.62]

The oxidative polymerization of phenols and anilines by enzymatic and chemical methods is an important method for synthesizing polyphenols50 and polyanilines51 in material research. Such polymerizations are often carried out in aqueous conditions. [Pg.210]

The use of water-soluble reagents and catalysts allows reactions to be performed in aqueous buffered solutions. PEG-supported triarylphos-phine has been used in a Wittig reaction under mildly basic aqueous conditions (Eq. 8.115). The PEG-supported phosphine oxide byproduct can be easily recovered and reduced by alane to regenerate the starting reagent for reuse.312 The aqueous Wittig reaction has also been used in... [Pg.279]

The decarboxylation of carboxylic acid in the presence of a nucleophile is a classical reaction known as the Hunsdiecker reaction. Such reactions can be carried out sometimes in aqueous conditions. Man-ganese(II) acetate catalyzed the reaction of a, 3-unsaturated aromatic carboxylic acids with NBS (1 and 2 equiv) in MeCN/water to afford haloalkenes and a-(dibromomethyl)benzenemethanols, respectively (Eq. 9.15).32 Decarboxylation of free carboxylic acids catalyzed by Pd/C under hydrothermal water (250° C/4 MPa) gave the corresponding hydrocarbons (Eq. 9.16).33 Under the hydrothermal conditions of deuterium oxide, decarbonylative deuteration was observed to give fully deuterated hydrocarbons from carboxylic acids or aldehydes. [Pg.306]

A similar use of maleimide was seen in Yu s hetero-Diels-Alder reactions. The Ar-ethyl pyrazole reacted under aqueous conditions at room temperature, with air oxidation to furnish the fully aromatized product <2001TL8931>. Other 1,3-substituted pyrazoles required heating in acetic acid at 50°C for 24h, with product yields of 42-67%. [Pg.730]

Epoxidation using manganese salen complexes is very easy to carry out it occurs under aqueous conditions and commercial house bleach can be used as the oxidant. The results are similar to those reported in the literature Table 6.1 gives other examples of alkenes which can be epoxidized using the same procedure. This method gives good results, especially for disubstituted Z-alkenes but trisubstituted alkenes can be epoxidized as well. [Pg.93]

Although potassium permanganate does not oxidize acetals in aqueous media, with a phase-transfer catalyst under non-aqueous conditions, cyclic acetals are converted into hydroxyalkyl carboxylates [36]. [Pg.419]

Note Control 2 was used for testing substrate stability during microsomal incubation it was very helpful in prediction of outcomes for synthesis, especially in the case of HOTYR, which is easily oxidized under neutral and basic aqueous conditions. [Pg.247]

There is some information concerning the reaction of ozone with chemicals under aqueous conditions. The information available suggests that double-bond cleavage takes place, just as it does under nonaqueous conditions, except that ozonides are not formed. Instead, the zwitterionk intermediate reacts with water, producing an aldehyde and hydrogen peroxide. In addition to double-bond cleavage, a number of other oxidations are possible. Mudd et showed that the susceptibility of amino acids is in the order cysteine, tryptophan, methionine. [Pg.452]

The mechanism of oxynitration is generally accepted to involve the formation of phenyl mercuric nitrate which reacts with nitrogen oxides in the nitric acid to form a nitroso compound and then a diazonium salt the latter forms a phenol under the aqueous conditions which is then further nitrated. The use of more concentrated nitric acid favours a process of mercuration-nitration and suppresses the formation of phenols. ... [Pg.140]

Oxidation with ozone in aqueous conditions yields sulfur and sulfuric acid 3HaS + O3 — 3S + 3HaO S + O3 + H2O H2SO4... [Pg.381]

The standard aqueous redox chemistry of vanadium and the other group 5 elements is summarized in the Latimer diagrams shown in Fig. 1 [2]. Under standard acidic aqueous conditions, the stability of the -1-5 oxidation state increases for the heavier group 5 elements at the expense of the +4 and -L3 states. [Pg.359]

As discussed in detail in Sections C.3.d and C.3.e, the fastest atmospheric reactions of S02 are believed to be with H202 and perhaps with Os at higher pH values. Under extreme conditions of large fog droplets (—10 yu,m) and very high oxidant concentrations, the chemical reaction times may approach those of diffusion, particularly in the aqueous phase. In this case, mass transport may become limiting. However, it is believed that under most conditions typical of the troposphere, this will not be the case and the chemical reaction rate will be rate determining in the S(IV) aqueous-phase oxidation. [Pg.308]

Extrapolation of their results to atmospheric conditions led them to suggest that such heterogeneous reactions could be important in the aqueous-phase oxidation of... [Pg.325]

This book offers no solutions to such severe problems. It consists of a review of the inorganic chemistry of the elements in all their oxidation states in an aqueous environment. Chapters 1 and 2 deal with the properties of liquid water and the hydration of ions. Acids and bases, hydrolysis and solubility are the main topics of Chapter 3. Chapters 4 and 5 deal with aspects of ionic form and stability in aqueous conditions. Chapters 6 (s- and p-block). 7 (d-block) and 8 (f-block) represent a survey of the aqueous chemistry of the elements of the Periodic Table. The chapters from 4 to 8 could form a separate course in the study of the periodicity of the chemistry of the elements in aqueous solution, chapters 4 and 5 giving the necessary thermodynamic background. A more extensive course, or possibly a second course, would include the very detailed treatment of enthalpies and entropies of hydration of ions, acids and bases, hydrolysis and solubility. [Pg.191]


See other pages where Aqueous conditions oxidation is mentioned: [Pg.287]    [Pg.287]    [Pg.229]    [Pg.880]    [Pg.876]    [Pg.186]    [Pg.301]    [Pg.102]    [Pg.496]    [Pg.36]    [Pg.151]    [Pg.176]    [Pg.223]    [Pg.308]    [Pg.658]    [Pg.242]    [Pg.179]    [Pg.82]    [Pg.160]    [Pg.260]    [Pg.172]    [Pg.226]    [Pg.260]    [Pg.544]    [Pg.1014]    [Pg.1030]    [Pg.1095]    [Pg.258]    [Pg.811]    [Pg.278]    [Pg.544]    [Pg.1014]    [Pg.1030]   


SEARCH



Aqueous alteration oxidizing conditions

Aqueous conditions

Aqueous oxidation

Conditional oxidation

© 2024 chempedia.info