Application Configuration Specification

Application Configuration Specification. The Application Configuration Specification (ACS) documents the application configuration required to meet the URS. The ACS records system setup parameters, process configuration, database configuration, file structures and so on required to implement the specific business implementation of the system. Where a standard implementation of the core product is adopted, this will be the only custom specification delivered to the pharmaceutical organization, accompanied by standard technical and user manuals. 

Pressure detection shall be used for closed enclosure applications. Threshold detectors provide an electric signal when a preset overpressure is exceeded. Dynamic detectors provide an electric signal to the control and indicating equipment (CIE). Typically they have both rate-of-rise and pressure threshold triggering points that can be configured specifically to the application conditions. Although this type of detector minimizes spurious activation of the isolation system (due to pressure fluctuations other than explosion pressure rise), care shall be taken to set up such detectors to meet appropriate detection response criteria for the particular application and protected enclosure geometry. 

Application-Specific Configuration Standard Application Configuration... 

Many different reviews dealing with membrane reactors and covering all technical and application aspects of this technology (reactor configuration, specific application, and system modeling) can be found (Sirkar, 1997 Lipnizki, Field, Ten, 1999 Sirkar,... 

Mathematical programming is the most prominent tool used in supply chain configuration, specifically for establishing the supply chain network, because of its ability to deal with spatial issues effectively. This chapter presents the generic mixed-integer programming model used in configuration. Application of this... 

Therefore the host structure is generic. Only the configuration parameters and the software applications are specific. The software is developed in standard language (C) based on standard hardware (PCI). 

The CamuS system is intended to be applied mainly in the field of weld inspection, where it is anticipated that the benefits of the analysis and visualisation facilities will be greatest. The specification for the prototype recognised that the system should be applicable to joints where the parent material is between 6mm and 150mm thick, and where the configuration and geometry of the weld preparation are of the types described in prEN1714 (see Figure 2). 

Applications Linked to Physical Properties. Apphcations involving physical properties use high purity (>99.99%) lanthanides and exploit the elements specific electronic configuration. 

Compressors have numerous forms, the exact configuration being based on the application. For comparison, the different types of compressors can be subdivided into two broad groups based on compression mode. There are two basic modes intermittent and continuous. The intermittent mode of compression is cyclic in nature, in that a specific quantity of gas IS ingested by the compressor, acted upon, and discharged, before the cycle is repeated. The continuous compression mode is one in which the gas is moved into the compressor, is acted upon, moved through the compressor, and discharged without interruption of the tlnv. at any point in the process. 

The reader may consult the reference section of this chapter for citations dealing with these types of agitator configurations and specific applications. 

---