Anionic reaction mechanism

A polymer is a giant molecule composed of a repeating structural unit called a monomer. Addition polymers result from the addition of alkene molecules to one another. The polymerization occurs by cationic, free-radical, and anionic reaction mechanisms. Examples of addition polymers include polyethylene, polystyrene, PVC, and Teflon. 

The mechanism of the polycondensation reaction remains unclear. A vanety of possible reactive intermediates have been suggested, including sdyl radicals and sdyl anions. An anionic propagation mechanism (100,101,103) has been strongly suggested, although the case is by no means setded (104). Other Synthetic Methods. 

Polymerization Reactions. The polymerization of butadiene with itself and with other monomers represents its largest commercial use. The commercially most important polymers are styrene—butadiene mbber (SBR), polybutadiene (BR), styrene—butadiene latex (SBL), acrylonittile—butadiene—styrene polymer (ABS), and nittile mbber (NR). The reaction mechanisms are free-radical, anionic, cationic, or coordinate, depending on the nature of the initiators or catalysts (194—196). 

A catalyst is defined as a substance that influences the rate or the direction of a chemical reaction without being consumed. Homogeneous catalytic processes are where the catalyst is dissolved in a liquid reaction medium. The varieties of chemical species that may act as homogeneous catalysts include anions, cations, neutral species, enzymes, and association complexes. In acid-base catalysis, one step in the reaction mechanism consists of a proton transfer between the catalyst and the substrate. The protonated reactant species or intermediate further reacts with either another species in the solution or by a decomposition process. Table 1-1 shows typical reactions of an acid-base catalysis. An example of an acid-base catalysis in solution is hydrolysis of esters by acids. 

DNA is not susceptible to alkaline hydrolysis. On the other hand, RNA is alkali labile and is readily hydrolyzed by dilute sodium hydroxide. Cleavage is random in RNA, and the ultimate products are a mixture of nucleoside 2 - and 3 -monophosphates. These products provide a clue to the reaction mechanism (Figure 11.29). Abstraction of the 2 -OH hydrogen by hydroxyl anion leaves a 2 -0 that carries out a nucleophilic attack on the phosphorus atom of the phosphate moiety, resulting in cleavage of the 5 -phosphodiester bond and formation of a cyclic 2, 3 -phosphate. This cyclic 2, 3 -phosphodiester is unstable and decomposes randomly to either a 2 - or 3 -phosphate ester. DNA has no 2 -OH therefore DNA is alkali stable. 

The reaction mechanism of the DNA (cytosine-5)-methyltransferase-catalyzed cytosine methylation was investigated at the MP2 and DFT levels [98JA12895]. This system has been modeled by 1-methylcytosine 117, methylthiolate, and trimethylsulfonium. The cytosine methylation is initiated by an attack of the anionic methylthiolate at Cg of the cytosine ring (Scheme 77). The formation of the methylthiolate adduct 118 of the neutral 117 was found to be endothermic in the gas phase and in solution. However, the MP2 and DFT results differ... 

The optimal pH-value for the coupling reaction depends on the reactant. Phenols are predominantly coupled in slightly alkaline solution, in order to first convert an otherwise unreactive phenol into the reactive phenoxide anion. The reaction mechanism can be formulated as electrophilic aromatic substitution taking place at the electron-rich aromatic substrate, with the arenediazonium ion being the electrophile ... 

The yV-bromoamide, its anion as well as the isocyanate have been identified as intermediates thus supporting the reaction mechanism as formulated above. 

The reaction mechanism involves deprotonation of the carboxylic anhydride 2 to give anion 4, which then adds to aldehyde 1. If the anhydride used bears two a-hydrogens, a dehydration takes place already during workup a /3-hydroxy carboxylic acid will then not be isolated as product ... 

An a-halosulfone 1 reacts with a base by deprotonation at the a -position to give a carbanionic species 3. An intramolecular nucleophilic substitution reaction, with the halogen substituent taking the part of the leaving group, then leads to formation of an intermediate episulfone 4 and the halide anion. This mechanism is supported by the fact that the episulfone 4 could be isolated. Subsequent extrusion of sulfur dioxide from 4 yields the alkene 2 ... 

Dagnall and West8 have described the formation and extraction of a blue ternary complex, Ag(I)-l,10-phenanthroline-bromopyrogallol red (BPR), as the basis of a highly sensitive spectrophotometric procedure for the determination of traces of silver (Section 6.16). The reaction mechanism for the formation of the blue complex in aqueous solution was investigated by photometric and potentiometric methods and these studies led to the conclusion that the complex is an ion association system, (Ag(phen)2)2BPR2, i.e. involving a cationic chelate complex of a metal ion (Ag + ) associated with an anionic counter ion derived from the dyestuff (BPR). Ternary complexes have been reviewed by Babko.9... 

Fig. 3.3.4 Reaction mechanism of the coelenterazine bioluminescence showing two possible routes of peroxide decomposition, the dioxetanone pathway (upper route) and linear decomposition pathway (lower route). The Oplopborus bioluminescence takes place via the dioxetanone pathway. The light emitter is considered to be the amide-anion of coelenteramide (see Section 5.4).

Acidity has an important influence on diazotization. Correlations of rates of diazotization with acidity and their implications regarding the reaction mechanism were first evaluated by Ridd (reviews Ridd, 1959, 1961, 1965, 1978 Williams, 1983, 1988). In this section we will concentrate mainly on aqueous solutions of sulfuric acid and perchloric acid, as the weakly nucleophilic anions of these acids do not interact with the nitrosating species. The mechanism of diazotization in the presence... 

No single criterion has been recognized as constituting a satisfactory basis for the systematic classification of the kinetics of solid-phase reactions (Chapt. 1, Sect. 3). A classification based on the anion is preferred here since it is this constituent which undergoes breakdown in most reactions of interest and proposed reaction mechanisms for substances containing a common anion often include similar features. 

The high values of E generally characteristic of the decomposition reactions of metal oxyhalides are widely interpreted as evidence that the initial step in anion breakdown is the rupture of the X—O bond and that the energy barrier to this reaction is not very sensitive to the properties of the cation present. Information of use in the formulation of reaction mechanisms has been obtained from radiolytic studies of oxyhalogen salts [887-889],... 

Reaction mechanism. The antibiotic monensin (Mon) is a linear monocarboxylic acid. In its anionic form it binds very tightly to monovalent cations. For Na+ +Mon = NaMon,... 

In contrast, the reaction mechanism in alkaline solution was shown to occur by nucleophilic attack by the anion of the peracid on the sulphoxide group53. Thus two different mechanisms seem to operate for the oxidation of sulphoxides to sulphones with peracids. At pH < 7 the sulphoxide acts as the nucleophile whilst at pH > 10 the peracid anion is the nucleophilic species. Presumably at intermediate pH values both mechanisms are operable. 

After arriving at the film surface, the metal ion Mz + forms an adsorbed complex (MJQ with the aggressive anion X. Then the complex quickly dissociates into the metal ion and aggressive ions in the solution. This is the second and the most important assumption. The reaction mechanism is described as... 

Reaction Mechanism. The reaction mechanism of the anionic-solution polymerization of styrene monomer using n-butyllithium initiator has been the subject of considerable experimental and theoretical investigation (1-8). The polymerization process occurs as the alkyllithium attacks monomeric styrene to initiate active species, which, in turn, grow by a stepwise propagation reaction. This polymerization reaction is characterized by the production of straight chain active polymer molecules ("living" polymer) without termination, branching, or transfer reactions. 

It is sometimes said that this electrode is reversible with respect to the anion. This claim must be examined in more detail. An electrode potential that depends on anion activity still constitutes no evidence that the anions are direct reactants. Two reaction mechanisms are possible at this electrode, a direct transfer of chloride ions across the interface in accordance with Eq. (3.34) or the combination of the electrode reaction... 

The resnlts from the TR experiments presented in Fignres 3.19-3.21 above were used to determine single exponential rate constants of 5.1 X 10 s for the decay of the ketyl radical, 1.6 X 10 s for the formation of the flnoranil anion and 8.4 X 10" s for the decay of the flnoranil radical anion. These rate constants snggest that the flnoranil radical anion is forming from the ketyl radical. A reaction mechanism for the intermo-lecular abstraction reaction can be described as follows ... 

Reaction step 5 in Scheme 3.1 can be rnled ont becanse the flnoranil ketyl radical (FAH ) reaches a maximum concentration within 100 ns as the triplet state ( FA) decays by reaction step 2 while the fluoranil radical anion (FA ) takes more than 500 ns to reach a maximum concentration. This difference snggests that the flnoranil radical anion (FA ) is being produced from the fluoranil ketyl radical (FAH ). Reaction steps 1 and 2 are the most likely pathway for prodncing the flnoranil ketyl radical (FAH ) from the triplet state ( FA) and is consistent with the TR resnlts above and other experiments in the literatnre. The kinetic analysis of the TR experiments indicates the fluoranil radical anion (FA ) is being prodnced with a hrst order rate constant and not a second order rate constant. This can be nsed to rnle ont reaction step 4 and indicates that the flnoranil radical anion (FA ) is being prodnced by reaction step 3. Therefore, the reaction mechanism for the intermolecular hydrogen abstraction reaction of fluoranil with 2-propanol is likely to predominantly occur through reaction steps 1 to 3. 

---