And specific gravity

In oil bearing formations, the presence of polar chemical functions of asphaltenes probably makes the rock wettable to hydrocarbons and limits their production. It also happens that during production, asphaltenes precipitate, blocking the tubing. The asphaltenes are partly responsible for the high viscosity and specific gravity of heavy crudes, leading to transport problems. 

Maxwell and Bonnel (1955) proposed a method to calculate the vapor pressure of pure hydrocarbons or petroleum fractions whose normal boiling point and specific gravity are known. It is iterative if the boiling point is greater than 366.5 K ... 

The different cuts obtained are collected their initial and final distillation temperatures are recorded along with their weights and specific gravities. Other physical characteristics are measured for the light fractions octane number, vapor pressure, molecular weight, PONA, weight per cent sulfur, etc., and, for the heavy fractions, the aniline point, specific gravity, viscosity, sulfur content, and asphaltene content, etc. 

Sulfur content and specific gravity as a function of residue yield. 

Density Density and specific gravity NFT 60-101 ISO 3675 ASTM D 1298 Hydrometer... 

Specific Gravity. Fiber cross sections are often irregular and specific gravity is measured by an immersion technique. The values of 1.32 for acetate and 1.30 for triacetate are accepted for fibers of combined acetic acid contents of 55 and 61.5%, respectively (13—15). 

The organic iodine compounds have lower heats of formation and greater reactivities than their chloro and bromo analogues. As ia the case of the inorganic iodides, their iadexes of refraction and specific gravities are higher than the corresponding chloro and bromo derivatives (121). 

Evidence of the appHcation of computers and expert systems to instmmental data interpretation is found in the new discipline of chemometrics (qv) where the relationship between data and information sought is explored as a problem of mathematics and statistics (7—10). One of the most useful insights provided by chemometrics is the realization that a cluster of measurements of quantities only remotely related to the actual information sought can be used in combination to determine the information desired by inference. Thus, for example, a combination of viscosity, boiling point, and specific gravity data can be used to a characterize the chemical composition of a mixture of solvents (11). The complexity of such a procedure is accommodated by performing a multivariate data analysis. 

Density and Specific Gravity. Water has a density, mass per unit volume, of about 62.4 lb/fU (1.000 g/cc) at 0°C, whereas mercury, also a Hquid, has a density of about 842 lb/ft (13.5 g/cc) at the same temperature. AH things being equal, greater densities mean thicker required tank sheU thicknesses. 

Citric acid, anhydrous, crystallizes from hot aqueous solutions as colorless translucent crystals or white crystalline powder. Its crystal form is monoclinic holohedra. Citric acid is dehquescent in moist air. Some physical properties are given in Table 1 (1 3). The solubiUty of citric acid in water and some organic solvents is given in Table 2. The pH and specific gravity of aqueous solutions of citric acid are shown in Table 3. 

Table 3. pH and Specific Gravity of Aqueous Citric Acid Solutions... 

The American Society for Testing and Materials (ASTM) and the American Oil Chemists Society (AOCS) provide standard methods for determining properties that are important in characterization of dimer acids. Characterization of dimer acids for acid and saponification values, unsaponiftables, and specific gravity are done by AOCS standard methods ... 

Global consumption of thermoplastic mbbers of all types is estimated at about 600,000 t/yr (51). Of this, 42% was estimated to be consumed in the United States, 39% in Western Europe, and 19% in Japan. At present, the woddwide market is estimated to be divided as follows styrenic block copolymers, 48% hard polymer/elastomer combinations, 26% thermoplastic polyurethanes, 12% thermoplastic polyesters, 4% and others, 9%. The three largest end uses were transportation, 23% footwear, 18% and adhesives, coatings, etc, 16%. The ranges of the hardness values, prices, and specific gravities of commercially available materials are given in Table 4. 

Table 6. Respective Volumes of Alcohol and Water and Specific Gravity ...

Density and Specific Gravity For binary or pseudobinary mixtures of hquids or gases or a solution of a solid or gas in a solvent, the density is a funcrion of the composition at a given temperature and pressure. Specific gravity is the ratio of the density of a noncompress-ible substance to the density of water at the same physical conditions. For nonideal solutions, empirical calibration will give the relationship between density and composition. Several types of measuring devices are described below. 

Where there is available ground and the specific resistivity of soil in the upper layers is low, the anodes are laid horizontally [3]. A trench 0.3 to 0.5 m wide and 1.5 to 1.8 m deep is dug with, for example, an excavator or trench digger (see Fig. 9-2). A layer of coke 0.2-m thick is laid on the bottom of the trench. The impressed current anodes are placed on this and covered with a 0.2-m layer of coke. Finally the trench is filled with the excavated soil. No. IV coke with a particle size of 5 to 15 mm and specific gravity of 0.6 t m" is backfilled at a rate of 50 kg per meter of trench. The anodes are connected in parallel and every three to four anode cables are connected to the anode header cable by a mechanical cable crimp encapsulated in an epoxy splice kit to give an economical service life at high current output. 

Whilst completely atactic material would be amorphous, commercial materials have a small measure of crystallinity. This is often assessed in terms of insolubility in n-heptane which is usually of the order of 5-10%. Viseosity average moleeular weights are in the range 20 000-80 000 and specific gravities are about 0.86 g/cm. ... 

The differences between the main types of polysulphone are quite small. The polyethersulphones (Type III in Table 21.3) have markedly better creep resistance at elevated temperatures, e.g. 150°C, significantly higher heat distortion temperatures and marginally superior room temperature meehanical properties than the Type II materials. They also exhibit higher water absotption, dielectric constant and specific gravity. 

Other requirements. These could include electrical insulation properties, including resistance to tracking and arcing, transparency, frictional properties, surface finish, scuff resistance and specific gravity. 

---