Ammonium nitrate slurries manufacture

Special authorisations are available for manufacture at the site of use of ammonium nitrate/fuel oil and certain slurry explosives provided that the equipment used and its position on the site are suitable. 

A suspected water gel is examined on a microscope slide to identify the microspheres used in slurry and emulsion explosives. The gel is directly extracted with methanol, which dissolves the amine salt, and a small amount of NH4NO3. TLC on a cellulose plate using a chloroform-methanol-water system separates the sensitizers. The plate is sprayed with ni-nhydrin and heated to visualize the amine salt. A second spray with diphenylamine in ethanol followed by long-wave UV irradiation visualizes the NFi4N03 if desired. Alternatively, the methanol extract may be evaporated to near dryness, redissolved in water, and analyzed by IC to identify the sensitizer. An intact sample can also be extracted with water using either a small homogenizer or ultrasonic agitation to disrupt the gel structure. Microspheres float on the surface and are removed for examination by SEM-EDX to characterize the manufacturer. Spot tests and IC identify ammonium, calcium, and nitrate ions in the water extract. Flake aluminum, if present, is identified as described above. 

---