Aminopropyltriethoxysilane based hybrids

Usually the silica/polymer composites are prepared with styrene, MMA, BA, or their copolymers. However, few reports cover experiments with less commonly used polymers such as poly(styrene sulfonic acid) (PSSA), poly(hydroxyethylmethacry-late) (PHFMA), poly(aminoethylmethacrylate) PAEMA [133], polyethylene (PE) [134], or polyamides [135]. Using a miniemulsion of nickel-based catalysts for the polymerization of ethylene, which is dispersed in toluene in the presence of hy-drophobically modified silica particles, PEysilica hybrids could be prepared [134]. The ethylene is introduced into the system by bubbling through the miniemulsion. The hydrophobic moiety of the silica particles interacts with the growing polymer and leads to lentil-shaped or isotropic hybrids. Lentil-shaped particles are composed of semicrystalline PE, whereas the isotropic hybrids are composed of amorphous polymer. The crystallinity of the polymer is determined by the choice of polymerization catalyst. Silica/polyamide hybrid nanoparticles were prepared with 3-aminopropyltriethoxysilane (APS)-modified silica particles [135]. These particles were dispersed in sebacoylchloride and the solution miniemulsifled in an aqueous... 

---