Alkyl halides amine

Preparation of primary amines Alkyl halide reacts with sodium amide (NaNH2) to give 1° amine via Sn2 reaction. The reaction mechanism for the formation of 1° amine is similar to the formation of nitrile. 

As a new class of materials, ionic liquids require special analytical methods. In the case of imidazolium halides and similar compounds the most common impurities are amines, alkyl halides and of course water. Seddon et al. described a method for the detection of residual amines using the strong UV absorbance of copper tetramine complexes. These complexes are readily formed by the addition of Cu2+ ions [24]. The detection of both amines and alkyl halides is possible by NMR spectroscopy but with limited resolution [25]. By far the most powerful analytical method is liquid chromatography combined with UV detection. This sensitive method allows the detection of traces of amines and halides [26]. Unreacted amines can be also detected by ion chromatography combined with a suppressor module. In this case detection is achieved using a continuous flow conductivity cell since amines are protonated and thus detectable. For traces of other ionic impurities ion chromatography is also the most powerful analytical tool [27]. Finally, residual water can be quantified using Karl Fischer titration or coulometry [28]. 

Incorporation of triethylamine into the reaction medium produced more reduction product presumably due to electron transfer from the triethylamine to the excited alkyl halide. This results in a weakly-bound amine-alkyl halide pair [57]. The alkyl halide radical anion releases X- (Scheme 17). In a related example, it is known that solutions of aliphatic amines in CC14 are unstable to light quickly forming white crystalline precipitates [60]. The initial reaction is formation of a singlet radical pair via excitation of a ground state charge-transfer complex. 

Urethanes. Methyl carbamates (1) can be prepared from primary or secondary amines, alkyl halides, and carbon dioxide in a reaction promoted by copper(I) /-butoxide (equation I). The ligand t-butyl isocyanide can be replaced with tri-n-butylphosphine. Copper(I) f-butoxide is more effective than other copper salts. In the case of diethylamine, the intermediates a and b were isolated and b was converted to the methyl carbamate in 86% yield. 

The preparation of pure primary amines by the interaction of alkyl halides and ammonia is very difficult, because the primary amine which is formed reacts with unchanged alkyl halide to give the secondary amine the latter... 

Amines are powerful nucleophiles which react under neutral or slightly basic conditions with several electron-accepting carbon reagents. The reaction of alkyl halides with amines is useful for the preparation of tertiary amines or quaternary ammonium salts. The conversion of primary amines into secondary amines is usually not feasible since the secondary amine tends towards further alkylation. 

A special problem arises in the preparation of secondary amines. These compounds are highly nucleophilic, and alkylation of an amine with alkyl halides cannot be expected to stop at any specifle stage. Secondary amides, however, can be monoalkylated and lydrolyzed or be reduced to secondary amines (p. 11 If.). In the elegant synthesis of phenyl- phrine an intermediate -hydroxy isocyanate (from a hydrazide and nitrous acid) cyclizes to pve an oxazolidinone which is monomethylated. Treatment with strong acid cleaves the cyclic irethan. 

Unlike alcohols and alkyl halides which are classified as primary secondary or tertiary according to the degree of substitution at the carbon that bears the functional group amines are classified according to their degree of substitution at nitrogen An amine with... 

Although this reaction is useful for preparing a ammo acids (Table 22 3 fifth entry) it IS not a general method for the synthesis of amines Its major limitation is that the expected primary amine product is itself a nucleophile and competes with ammonia for the alkyl halide... 

Because alkylation of ammonia can lead to a complex mixture of products it is used to prepare primary amines only when the starting alkyl halide is not particularly expensive and the desired amine can be easily separated from the other components of the reaction mixture... 

A method that achieves the same end result as that desired by alkylation of ammonia but which avoids the formation of secondary and tertiary amines as byproducts is the Gabriel synthesis Alkyl halides are converted to primary alkylamines without contam mation by secondary or tertiary amines The key reagent is the potassium salt of phthal imide prepared by the reaction... 

Among compounds other than simple alkyl halides a halo ketones and a halo esters have been employed as substrates m the Gabriel synthesis Alkyl p toluenesul fonate esters have also been used Because phthalimide can undergo only a single alkyl ation the formation of secondary and tertiary amines does not occur and the Gabriel synthesis is a valuable procedure for the laboratory preparation of primary amines... 

Because nitriles can be prepared from alkyl halides by nucleophilic substitution with cyanide ion the overall process RX RC=N RCH2NH2 leads to primary amines that have one more carbon atom than the starting alkyl halide... 

Nucleophilic substitution results when primary alkyl halides are treated with amines... 

The reaction of amines with alkyl halides was seen earlier (Section 22 7) as a complicat ing factor in the preparation of amines by alkylation of ammonia... 

Ammonia can act as a nucleophile toward primary and some secondary alkyl halides to give primary alkylamines Yields tend to be modest because the primary amine IS itself a nucleophile and undergoes alkylation Alkylation of ammonia can lead to a mixture containing a primary amine a secondary amine a tertiary amine and a quaternary ammonium salt... 

Alkylation (Section 22 12) Amines act as nucleophiles toward alkyl halides Pri mary amines yield secondary amines secondary amines yield tertiary amines and tertiary amines yield quaternary ammonium salts... 

A number of 2eohtic materials have been claimed to cataly2e this reaction and reaction temperatures are on the order of 200—350°C with pressures as high as 18000 kPa (2600 psi) reported. This is a low conversion process and recycle of the unconverted starting materials is necessary to provide an economical process. Amination of ethylene to produce ethylamines cataly2ed by ammonium iodide is reported, but not beheved to be practiced commercially (15,16). Alkyl Halide Amination (Method 7). The oldest technology for pioducing amines is the reaction of ammonia with an alkyl hahde. This... 

---