Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aluminum wire

Aluminium, n. aluminum, aluminium, -blech, n. sheet aluminum, -bor, n. aluminum boride, -draht, m. aluminum wire, -eisen, n. ferro-aluminum. -erz, n. aluminum ore. -feilspane, m.pl. aluminum filings, -fluorwasserstoff-saure, /. fluoaluminic acid, -folie, /. aluminum foil, -formiat, n. aluminum formate, -giesserei, /. aluminum foundry or founding. -griess, m. (coarse) aluminum powder aluminum shot. guss, m. aluminum cast-ing(s), cast aluminum. [Pg.20]

Wire is often sold in pound spools according to the wire gauge number. That number refers to the diameter of the wire. How many meters are in a 10-lb spool of 12-gauge aluminum wire A 12-gauge wire has a diameter of0.0808 in. Aluminum has a density of 2.70 g/cm3. (V = irr2 )... [Pg.23]

GP 2] [R 3a] The performance of one micro reactor with three kinds of catalyst -construction material silver, sputtered silver (dense) on aluminum alloy (AlMg3), and sputtered silver on anodically oxidized (porous) aluminum alloy (AlMg3) -was compared with three fixed beds with the same catalysts [44]. The fixed beds were built up by hackled silver foils, aluminum wires (silver sputtered) and hack-led aluminum foils (anodically oxidized and silver sputtered), all having the same catalytic surface area as the micro channels. Results were compared at the same flow rate per unit surface area. [Pg.307]

Plan (1) Find the volume of the aluminum wire, assuming that 10-lb spool contains 10.0 lb of aluminum... [Pg.15]

Aluminum tris(tetrahydroborate), 4 196 Aluminum wire, 17 833 Aluminum wrought alloy 1100, 2 328t chemical industry applications, 2 341 weathering, 2 336t... [Pg.43]

The tissue-compatible microprobes represent an advance over the typical aluminum wire electrodes used in studies of the cortex and other brain structures. Researchers accumulate much data using traditional electrodes, but there is a question of how much damage they cause to the nervous system. Microprobes, which are about as thin as a human hair, cause minimal damage and disruption of neurons when inserted into the brain. [Pg.214]

Equation (60) was used earlier125 for bubbles (of uncertain composition) introduced in pure aluminum wires by plunging these from 650 °C into a saturated solution of calcium chloride kept at 100 °C. The bubbles were up to 500 angstroms across. They were characterized as octahedral but treated (in calculations) as spheres. The 7S appeared to be at 150 °C, 175 °C, and 200 °C, respectively, 1160,930, and 960 erg/cm2. [Pg.42]

With the emery paper or sandpaper, polish 10 cm of aluminum wire until it is shiny. Use wire cutters to cut the aluminum wire into four 2.5-cm pieces. Place a piece of the aluminum wire in each row A well that contains solution. [Pg.39]

With the aid of a thin aluminum wire, make several smali perforations thru the wrapper... [Pg.557]

The anodes are used high carbon steel band saw blades (Sandvik) cut into strips approximately 8" long. The cathodes are aluminum wire pounded to a thickness of 0.1mm. [Pg.300]

Common procedures of qualitative mercury analysis, i.e. using aluminum foil hooked up to a battery to determine the presence of mercury in a solution (mercury metal forms on the surface of the aluminum foil), suggested the use of aluminum as a cathode. This principle was applied on a larger scale using aluminum wire which had to be flattened to a certain thickness for the voltage used. [Pg.301]

The surface area of the cathode was also important in increasing the efficiency of the plating operation. The aluminum wire was coiled in... [Pg.301]

The usual reference electrode for use in these melts is the A1(III)/A1 couple that results when high-purity aluminum wire is immersed in either 66.7-33.3 or 60.0-40.0 mol% melt. This reference melt is separated from the bulk melt with a... [Pg.516]

The reference electrode recommended for use in the AlCl3-NaCl melt is the A1(III)/A1 couple that is obtained by placing an aluminum wire in a tube containing NaCl(satd) melt (49.8-50.2 mol% AlCl3-NaCl at 175°C). The reference electrode tube is terminated at one end with a Pyrex frit [26] or a thin Pyrex membrane [27]. A platinum wire quasi-reference electrode is used by some researchers [28]. [Pg.518]

In order to obtain a fragment of catalase, it was immobilized by adsorption on various organic and inorganic carriers (such as aluminum oxide, diasorb DEAE, agarose), with further tryp-sine treatment. Aluminum wire or foil was used as the electrode. Such electrodes were selected because of their low price and inertness in relation to hydrogen peroxide. The binding agent between the electrode and biomimic was Pattex adhesive and 7.5% polyacrylamide gel. [Pg.294]

A biomimetic sensor was created with electrodes from aluminum wire (2 mm thick) and aluminum foil (size 20 X 10 X 1 mm), to which the working element was applied by two methods ... [Pg.294]

Twenty-seven grams (1 mole) of aluminum wire or foil which has just been cleaned with emery paper and wiped with a clean cloth (if turnings are employed, it may be necessary to dean, amalgamate, and dry them according to the procedure of Wislicenus)64 66 is placed in a 1-1. round-bottomed flask containing 300 cc. of anhydrous isopropyl alcohol (distilled from calcjum oxide) and 0.5 g. of mercuric chloride. The flask is attached to an efficient reflux condenser, which is protected from moisture by a mercury trap or a calcium chloride drying tube, and the mixture is heated on the steam bath or a hot plate. When the liquid is boiling, 2 cc. of carbon tetrachloride, which is an effective catalyst for the... [Pg.198]

Obtain a 45-cm length of aluminum wire (approx. 1.5 g). Make a flat coil on one end of the wire, and a handle at the other end. Make the handle long enough so that the wire can be hung over the side of the beaker. The coil must be covered by the solution and should reach the bottom of the beaker (Fig. 6.1). [Pg.59]

When the supernatant no longer tests for Cu2+ ions, the reaction is complete. Shake the aluminum wire so that all the copper clinging to it will fall into the solution. With... [Pg.59]

In order to obtain colorless chloroaluminate liquids it is recommended to sublime the AICI3 several times prior to use after the addition of sodium chloride and aluminum wire [8],... [Pg.17]

CLIMAT (classification of Industrial and Marine Atmospheres,21 gives data on uniform or galvanic corrosion of aluminum wire wound around threaded bolts made of steel or copper in an atmosphere of interest)... [Pg.118]


See other pages where Aluminum wire is mentioned: [Pg.160]    [Pg.7]    [Pg.24]    [Pg.626]    [Pg.421]    [Pg.187]    [Pg.113]    [Pg.199]    [Pg.404]    [Pg.179]    [Pg.648]    [Pg.417]    [Pg.410]    [Pg.677]    [Pg.675]    [Pg.852]    [Pg.222]    [Pg.160]    [Pg.396]    [Pg.59]    [Pg.59]    [Pg.60]    [Pg.79]    [Pg.539]    [Pg.539]    [Pg.476]    [Pg.256]    [Pg.455]    [Pg.490]   
See also in sourсe #XX -- [ Pg.146 ]




SEARCH



Aluminum electrical wires

Aluminum resistance of wires

Aluminum wire tables

Importance—Aluminum Electrical Wires

© 2024 chempedia.info