Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Allylic derivatives cyclopropanation

The difference in acidity of the a-methylene groups in 2-thenyl compared to 3-thenyl derivatives is clearly shown by the reaction of the quaternary ammonium iodides (322) and (323) with sodium amide. While the former yields a cyclopropane, the latter leads to an allyl derivative (Scheme 95) showing that in the case of (323) it is not the a-methylene which is deprotonated (71JOC2236). [Pg.799]

The only products of solvolysis of the tosylate 60 from the 1 -ethynylcyclopropanol 9, with R = CH3 was the allyl derivatives 61 (R = CH3) from the ring opening of the cyclopropane ring, while unrearranged cyclopropanols (or derivatives) 62 were obtained in high yields when R = cyclopropyl or aryl, Eq. (18)13>. [Pg.11]

LDCA = lithium dicyclohexylamine when LDA was used mixtures of cyclopropanes and /-substituted allyl derivatives were obtained. [Pg.88]

Prior chapters have covered the use of transition metals in asymmetric hydrogenations ( 6.2 and 7.1), hydroborations ( 7.3), hydrosilylations and hydro-cyanations ( 6.3, 6.4, 7.4 and 7.5), cyclopropanations ( 7.19), aldol reactions ( 6.11), allylations of carbanions ( 5.3.2), and some sigmatropic rearrangements ( 10.3). This chapter covers other reactions catalyzed by transition metal complexes including coupling of organometallic reagents with vinyl, aryl or allyl derivatives, Heck reactions allylamine isomerizations, some allylation reactions, car-bene insertions into C-H bonds and Pauson-Khand reactions. [Pg.619]

Allylic acetates react with ketene silyl acetals. In this reaction, in addition to the allylated ester 468, the cyclopropane derivative 469. which is formed by the use of bidentate ligands, is obtained[303]. Formation of a cyclopropane derivative 471 has been observed by the stoichiometric reaction of the 7r-allylpal-... [Pg.352]

Addition to a carbon-carbon triple bond is even more facile than addition to a carbon-carbon double bond, and there are now several reports of intermolec-ular [71] and intramolecular reactions [72-74] that produce stable cyclopropene products with moderate to high enantioselectivities. One of the most revealing examples is that shown in Scheme 9 [72] where the allylic cyclopropanation product (30) is formed by the less reactive Rh2(MEPY)4 catalyst, but macrocy-clization is favored by the more reactive Rh2(TBSP)4 and Rh2(IBAZ)4 catalysts and, as expected, the highest enantioselectivities are derived from the use of chiral dirhodium(II) carboxamidate catalysts. [Pg.213]

Scheme 6.20 Simmons-Smith cyclopropanations of allylic alcohols with cyclohexanediamine-derived bis(snlfonamides) ligands. Scheme 6.20 Simmons-Smith cyclopropanations of allylic alcohols with cyclohexanediamine-derived bis(snlfonamides) ligands.
Several catalytic systems have been reported for the enantioselective Simmons Smith cyclopropanation reaction and, among these, only a few could be used in catalytic amounts. Chiral bis(sulfonamides) derived from cyclo-hexanediamine have been successfully employed as promoters of the enantioselective Simmons-Smith cyclopropanation of a series of allylic alcohols. Excellent results in terms of both yield and stereoselectivity were obtained even with disubstituted allylic alcohols, as shown in Scheme 6.20. Moreover, this methodology could be applied to the cyclopropanation of stannyl and silyl-substituted allylic alcohols, providing an entry to the enantioselective route to stannyl- and silyl-substituted cyclopropanes of potential synthetic intermediates. On the other hand, it must be noted that the presence of a methyl substituent at the 2-position of the allylic alcohol was not well tolerated and led to slow reactions and poor enantioselectivities (ee<50% ee). ... [Pg.226]

The directive effect of allylic hydroxy groups can be used in conjunction with chiral catalysts to achieve enantioselective cyclopropanation. The chiral ligand used is a boronate ester derived from the (VjA jA N -tetramethyl amide of tartaric acid.186 Similar results are obtained using the potassium alkoxide, again indicating the Lewis base character of the directive effect. [Pg.920]

In contrast to ethyl diazoacetate, diethyl diazomalonate reacts with allyl bromide in the presence of Rh2(OAc)4 to give the ylide-derived diester favored by far over the cyclopropane (at 60 °C 93 7 ratio). This finding bespeaks the greater electrophilic selectivity of the carbenoid derived from ethyl diazomalonate. For reasons unknown, this property is not expressed, however, in the reaction with allyl chloride, as the carbenoids from both ethyl diazoacetate and diethyl diazomalonate exhibit a similarly high preference for cyclopropanation. [Pg.136]

Allyl acetals154). Allyl ethers give no or only trace amounts of ylide-derived products in the Rh2(OAc)4-catalyzed reaction with ethyl diazoacetate, thus paralleling the reactivity of allyl chloride. In contrast, cyclopropanation must give way to the ylide route when allyl acetals are the substrates and ethyl diazoacetate or dimethyl diazomalonate the carbenoid precursors. [Pg.139]

The versatile Ti(II) chemistry available using preformed (alkene)Ti(OiPr)2 species was opened up by the discovery of the Kulinkovich cyclopropanation reaction [55]. Since 1995, Sato and collaborators have developed a wide range of elegant and synthetically useful reactions based on the Ti(OiPr)4/iPrMgCl reagent [56]. In particular, it was reported that the Ti(II) complex (q2-propene)Ti(OiPr)2, preformed from Ti(OiPr)4 and 2 equivalents of iPrMgCl, reacts with allylic compounds, such as halide, acetate, carbonate, phosphate, sulfonate, and aryl ether derivatives, to afford allyltitanium compounds as depicted in Scheme 13.27 [57]. [Pg.467]

Concerning the structure, the cyclopropane derivatives 524—526 deviate from the generally observed cycloadducts of cyclic allenes with monoalkenes (see Scheme 6.97 and many examples in Section 6.3). The difference is caused by the different properties of the diradical intermediates that are most likely to result in the first reaction step. In most cases, the allene subunit is converted in that step into an allyl radical moiety that can cyclize only to give a methylenecyclobutane derivative. However, 5 is converted to a tropenyl-radical entity, which can collapse with the radical center of the side-chain to give a methylenecyclobutane or a cyclopropane derivative. Of these alternatives, the formation of the three-membered ring is kinetically favored and hence 524—526 are the products. The structural relationship between both possible product types is made clear in Scheme 6.107 by the example of the reaction between 5 and styrene. [Pg.337]

Asymmetric allylic C-H activation of more complex substrates reveals some intrinsic features of the Rh2(S-DOSP)4 donor/acceptor carbenoids [135, 136]. Cyclopropanation of trans-disubstituted or highly substituted alkenes is rarely observed, due to the steric demands of these carbenoids [16]. Therefore, the C-H activation pathway is inherently enhanced at substituted allylic sites and the bulky rhodium carbenoid discriminates between accessible secondary sites for diastereoselective C-H insertion. As a result, the asymmetric allylic C-H activation provides alternative methods for the preparation of chiral molecules traditionally derived from classic C-C bond-forming reactions such as the Michael reaction and the Claisen rearrangement [135, 136]. [Pg.332]

Artemisyl, Santolinyl, Lavandulyl, and Chrysanthemyl Derivatives.— The presence of (41) in lavender oil has been reported earlier. Poulter has published the full details of his work (Vol. 5, p. 14) on synthetic and stereochemical aspects of chrysanthemyl ester and alkoxypyridinium salt solvolyses (Vol. 3, pp. 20—22) and discussed its biosynthetic implications. Over 98% of the solvolysis products are now reported to be artemisyl derivatives which are formed from the primary cyclopropylcarbinyl ion (93) which results from predominant (86%) ionization of the antiperiplanar conformation of (21)-)V-methyl-4-pyridinium iodide the tail-to-tail product (96 0.01%) may then result from the suprafacial migration of the cyclopropane ring bond as shown stereochemically in Scheme 3. This is consistent with earlier work (Vol. 7, p. 20, ref, 214) reporting the efficient rearrangement of the cyclobutyl cation (94) to (96) and its allylic isomer, via the tertiary cyclopropylcarbinyl cation (95). ... [Pg.32]


See other pages where Allylic derivatives cyclopropanation is mentioned: [Pg.204]    [Pg.88]    [Pg.88]    [Pg.169]    [Pg.345]    [Pg.1562]    [Pg.1562]    [Pg.373]    [Pg.299]    [Pg.225]    [Pg.123]    [Pg.155]    [Pg.64]    [Pg.29]    [Pg.228]    [Pg.13]    [Pg.486]    [Pg.132]    [Pg.137]    [Pg.141]    [Pg.143]    [Pg.209]    [Pg.423]    [Pg.312]    [Pg.479]    [Pg.136]    [Pg.110]    [Pg.11]    [Pg.34]    [Pg.69]    [Pg.319]   
See also in sourсe #XX -- [ Pg.686 ]

See also in sourсe #XX -- [ Pg.686 ]

See also in sourсe #XX -- [ Pg.1570 , Pg.1571 ]




SEARCH



5-Allyl-derivatives

Allyl cyclopropanation

Allylic cyclopropanation

Allylic derivatives

Allylic derivatives stereoselective cyclopropanation

Cyclopropane derivatives

Cyclopropanes allylic derivatives

Cyclopropanes allylic derivatives

© 2024 chempedia.info